/* USER CODE BEGIN Header */
/**
  ******************************************************************************
  * @file           : main.c
  * @brief          : Main program body
  ******************************************************************************
  * @attention
  *
  * Copyright (c) 2024 STMicroelectronics.
  * All rights reserved.
  *
  * This software is licensed under terms that can be found in the LICENSE file
  * in the root directory of this software component.
  * If no LICENSE file comes with this software, it is provided AS-IS.
  *
  ******************************************************************************
  */
/* USER CODE END Header */
/* Includes ------------------------------------------------------------------*/
#include "main.h"
#include "tim.h"
#include "gpio.h"

/* Private includes ----------------------------------------------------------*/
/* USER CODE BEGIN Includes */
#include "variable.h"
// #include "directkey.h"
// #include "MatrixKey.h"
#include "SegLed.h"
/* USER CODE END Includes */

/* Private typedef -----------------------------------------------------------*/
/* USER CODE BEGIN PTD */

/* USER CODE END PTD */

/* Private define ------------------------------------------------------------*/
/* USER CODE BEGIN PD */
typedef struct {
  uint32_t CapValue1;
  uint32_t CapValue2;
  float     Duty;
  float     Frequency;
  uint8_t   CapIsFinish;
} stPWMCap;
stPWMCap sPwmCap = {0};
/* USER CODE END PD */

/* Private macro -------------------------------------------------------------*/
/* USER CODE BEGIN PM */

/* USER CODE END PM */

/* Private variables ---------------------------------------------------------*/

/* USER CODE BEGIN PV */
stSysTickTimer sSysTickTimer = {
  0, 0, 0, 0
};
uint8_t tempValue;
structTime stTime = {
  .mSecond = 50,
  .mMinute = 45,
  .mHour = 8,
  .mTimeCount = 0,
  .bSecondIsOk = 0,
  .mTenMilCount = 0,
  .bTenMilIsOk = 0
};
/* USER CODE END PV */

/* Private function prototypes -----------------------------------------------*/
void SystemClock_Config(void);
/* USER CODE BEGIN PFP */

/* USER CODE END PFP */

/* Private user code ---------------------------------------------------------*/
/* USER CODE BEGIN 0 */

/* USER CODE END 0 */

/**
  * @brief  The application entry point.
  * @retval int
  */
int main(void)
{

  /* USER CODE BEGIN 1 */
  uint8_t KeyValue = 0;
  /* USER CODE END 1 */

  /* MCU Configuration--------------------------------------------------------*/

  /* Reset of all peripherals, Initializes the Flash interface and the Systick. */
  HAL_Init();

  /* USER CODE BEGIN Init */

  /* USER CODE END Init */

  /* Configure the system clock */
  SystemClock_Config();

  /* USER CODE BEGIN SysInit */

  /* USER CODE END SysInit */

  /* Initialize all configured peripherals */
  MX_GPIO_Init();
  MX_TIM3_Init();
  MX_TIM4_Init();
  /* USER CODE BEGIN 2 */
  // FlashLeds_GPIO_Port->ODR &= 0xff01;
  // HAL_TIM_Base_Start(&htim4);
  HAL_TIM_PWM_Start(&htim4, TIM_CHANNEL_1);
  // HAL_TIM_Base_Start_IT(&htim3);
  HAL_TIM_IC_Start_IT(&htim3, TIM_CHANNEL_1);
  HAL_TIM_IC_Start_IT(&htim3, TIM_CHANNEL_2);
  TimeToBuff(&stTime);
  /* USER CODE END 2 */

  /* Infinite loop */
  /* USER CODE BEGIN WHILE */
  while (1)
  {
    /* USER CODE END WHILE */

    /* USER CODE BEGIN 3 */
    if (sPwmCap.CapIsFinish) {
      DispToBuff(sPwmCap.CapValue2 + 1);
      sPwmCap.CapIsFinish = 0;
      sPwmCap.CapValue1 = 0;
      sPwmCap.CapValue2 = 0;
      sPwmCap.Duty = 0;
      sPwmCap.Frequency = 0;
    }
    if (stTime.bTenMilIsOk) {
      stTime.bTenMilIsOk = 0;
    }
    if (stTime.bSecondIsOk) {
      stTime.bSecondIsOk = 0;
      if (++stTime.mSecond >= 60) {
        stTime.mSecond = 0;
        if (++stTime.mMinute >= 60) {
          stTime.mMinute = 0;
          if (++stTime.mHour >= 24) {
            stTime.mHour = 0;
          }
        }
      }
      TimeToBuff(&stTime);
    }
    // if (sSysTickTimer.bTenMilSecOk) {
    //   sSysTickTimer.bTenMilSecOk = 0;
    //   KeyValue = MatrixKeyScan();
    //   if (KeyValue != NO_KEY) {
    //   //   switch (KeyValue)
    //   //   {
    //   //   case 0x0E: // K1
    //   //     tempValue = 1;
    //   //     break;
        
    //   //   case 0x0D: // K5
    //   //     tempValue = 2;
    //   //     break;

    //   //   case 0x0B: // K9
    //   //     tempValue = 3;
    //   //     break; 

    //   //   case 0x07: // K13
    //   //     tempValue = 4;
    //   //     break;
        
    //   //   default:
    //   //     break;
    //   //   }
    //     for (int i = 0; i < 16; i++) {
    //       if (KeyValue == KeyTable[i]) {
    //         tempValue = i;
    //       }
    //     }
    //     // DispToBuff(tempValue);
    //   }
    // }
    if (sSysTickTimer.bTimeOk) {
      sSysTickTimer.bTimeOk = 0;
      // TimeToBuff();
      HAL_GPIO_TogglePin(LED_GPIO_Port, LED_Pin);
    }
  }
  /* USER CODE END 3 */
}

/**
  * @brief System Clock Configuration
  * @retval None
  */
void SystemClock_Config(void)
{
  RCC_OscInitTypeDef RCC_OscInitStruct = {0};
  RCC_ClkInitTypeDef RCC_ClkInitStruct = {0};

  /** Configure the main internal regulator output voltage
  */
  HAL_PWREx_ControlVoltageScaling(PWR_REGULATOR_VOLTAGE_SCALE1_BOOST);

  /** Initializes the RCC Oscillators according to the specified parameters
  * in the RCC_OscInitTypeDef structure.
  */
  RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE;
  RCC_OscInitStruct.HSEState = RCC_HSE_ON;
  RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
  RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE;
  RCC_OscInitStruct.PLL.PLLM = RCC_PLLM_DIV6;
  RCC_OscInitStruct.PLL.PLLN = 85;
  RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV2;
  RCC_OscInitStruct.PLL.PLLQ = RCC_PLLQ_DIV2;
  RCC_OscInitStruct.PLL.PLLR = RCC_PLLR_DIV2;
  if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK)
  {
    Error_Handler();
  }

  /** Initializes the CPU, AHB and APB buses clocks
  */
  RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_SYSCLK
                              |RCC_CLOCKTYPE_PCLK1|RCC_CLOCKTYPE_PCLK2;
  RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
  RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
  RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1;
  RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1;

  if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_4) != HAL_OK)
  {
    Error_Handler();
  }
}

/* USER CODE BEGIN 4 */
void HAL_TIM_IC_CaptureCallback(TIM_HandleTypeDef *htim) {
  if (htim == &htim3) {
    if (!sPwmCap.CapIsFinish) {
      if (htim->Channel == HAL_TIM_ACTIVE_CHANNEL_1) {
        sPwmCap.CapValue1 = HAL_TIM_ReadCapturedValue(htim, TIM_CHANNEL_1);
        sPwmCap.CapValue2 = HAL_TIM_ReadCapturedValue(htim, TIM_CHANNEL_2);
        if (sPwmCap.CapValue1 != 0) {
          sPwmCap.CapIsFinish = 1;
        }
      }
    }
  }
}
void HAL_TIM_PeriodElapsedCallback(TIM_HandleTypeDef *htim) {
  if (htim == &htim3) {
    Display();
    if (++stTime.mTenMilCount >= 10) {
      stTime.mTenMilCount = 0;
      stTime.bTenMilIsOk = 1;
      if (++stTime.mTimeCount >= 100) {
        stTime.mTimeCount = 0;
        stTime.bSecondIsOk = 1;
      }
    }
  }
}
/* USER CODE END 4 */

/**
  * @brief  This function is executed in case of error occurrence.
  * @retval None
  */
void Error_Handler(void)
{
  /* USER CODE BEGIN Error_Handler_Debug */
  /* User can add his own implementation to report the HAL error return state */
  __disable_irq();
  while (1)
  {
  }
  /* USER CODE END Error_Handler_Debug */
}

#ifdef  USE_FULL_ASSERT
/**
  * @brief  Reports the name of the source file and the source line number
  *         where the assert_param error has occurred.
  * @param  file: pointer to the source file name
  * @param  line: assert_param error line source number
  * @retval None
  */
void assert_failed(uint8_t *file, uint32_t line)
{
  /* USER CODE BEGIN 6 */
  /* User can add his own implementation to report the file name and line number,
     ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */
  /* USER CODE END 6 */
}
#endif /* USE_FULL_ASSERT */