/****************************************************************************************************
//=========================================电源接线================================================//
// LCD模块 STM32单片机
// VCC 接 DC5V/3.3V //电源
// GND 接 GND //电源地
//=======================================液晶屏数据线接线==========================================//
//本模块默认数据总线类型为SPI总线
// LCD模块 STM32单片机
// SDA 接 PB15 //液晶屏SPI总线数据写信号
//=======================================液晶屏控制线接线==========================================//
// LCD模块 STM32单片机
// LED 接 PB9 //液晶屏背光控制信号，如果不需要控制，接5V或3.3V
// SCK 接 PB13 //液晶屏SPI总线时钟信号
// A0 接 PB10 //液晶屏数据/命令控制信号
// RESET 接 PB12 //液晶屏复位控制信号
// CS 接 PB11 //液晶屏片选控制信号
//=========================================触摸屏触接线=========================================//
//如果模块不带触摸功能或者带有触摸功能，但是不需要触摸功能，则不需要进行触摸屏接线
// LCD模块 STM32单片机
// T_IRQ 接 PC10 //触摸屏触摸中断信号
// T_DO 接 PC2 //触摸屏SPI总线读信号
// T_DIN 接 PC3 //触摸屏SPI总线写信号
// T_CS 接 PC13 //触摸屏片选控制信号
// T_CLK 接 PC0 //触摸屏SPI总线时钟信号
*************************** ***********************************************************************/
/* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
* TIME. AS A RESULT, QD electronic SHALL NOT BE HELD LIABLE FOR ANY
* DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
**************************************************************************************************/
#include "lcd.h"
#include "gui.h"
#include "test.h"
#include "pic.h"
#include "main.h"
//========================variable==========================//
uint16_t ColorTab[5]={RED,GREEN,BLUE,YELLOW,BRED};//定义颜色数组
//=====================end of variable======================//
/*****************************************************************************
* @name :void DrawTestPage(uint8_t *str)
* @date :2018-08-09
* @function :Drawing test interface
* @parameters :str:the start address of the Chinese and English strings
* @retvalue :None
******************************************************************************/
void DrawTestPage(uint8_t *str)
{
//绘制固定栏up
LCD_Clear(WHITE);
LCD_Fill(0,0,lcddev.width,20,BLUE);
//绘制固定栏down
LCD_Fill(0,lcddev.height-20,lcddev.width,lcddev.height,BLUE);
POINT_COLOR=WHITE;
Gui_StrCenter(0,2,WHITE,BLUE,str,16,1);//居中显示
Gui_StrCenter(0,lcddev.height-18,WHITE,BLUE,"www.lcdwiki.com",16,1);//居中显示
//绘制测试区域
//LCD_Fill(0,20,lcddev.width,lcddev.height-20,WHITE);
}
/*****************************************************************************
* @name :void main_test(void)
* @date :2018-08-09
* @function :Drawing the main Interface of the Comprehensive Test Program
* @parameters :None
* @retvalue :None
******************************************************************************/
void main_test(void)
{
DrawTestPage("综合测试程序");
Gui_StrCenter(0,23,RED,BLUE,"全动电子",16,1);//居中显示
Gui_StrCenter(0,40,RED,BLUE,"综合测试程序",16,1);//居中显示
Gui_StrCenter(0,57,GREEN,BLUE,"1.8\" ST7735S",16,1);//居中显示
Gui_StrCenter(0,74,GREEN,BLUE,"128X160",16,1);//居中显示
Gui_StrCenter(0,91,BLUE,BLUE,"2018-08-22",16,1);//居中显示
HAL_Delay(1500);
HAL_Delay(1500);
}
/*****************************************************************************
* @name :void Test_Color(void)
* @date :2018-08-09
* @function :Color fill test(white,black,red,green,blue)
* @parameters :None
* @retvalue :None
******************************************************************************/
void Test_Color(void)
{
//DrawTestPage("测试1:纯色填充测试");
LCD_Fill(0,0,lcddev.width,lcddev.height,WHITE);
Show_Str(20,30,BLUE,YELLOW,"BL Test",16,1);HAL_Delay(800);
LCD_Fill(0,0,lcddev.width,lcddev.height,RED);
Show_Str(20,30,BLUE,YELLOW,"RED ",16,1);HAL_Delay(800);
LCD_Fill(0,0,lcddev.width,lcddev.height,GREEN);
Show_Str(20,30,BLUE,YELLOW,"GREEN ",16,1);HAL_Delay(800);
LCD_Fill(0,0,lcddev.width,lcddev.height,BLUE);
Show_Str(20,30,RED,YELLOW,"BLUE ",16,1);HAL_Delay(800);
}
/*****************************************************************************
* @name :void Test_FillRec(void)
* @date :2018-08-09
* @function :Rectangular display and fill test
Display red,green,blue,yellow,pink rectangular boxes in turn,
1500 milliseconds later,
Fill the rectangle in red,green,blue,yellow and pink in turn
* @parameters :None
* @retvalue :None
******************************************************************************/
void Test_FillRec(void)
{
uint8_t i=0;
DrawTestPage("GUI矩形填充测试");
LCD_Fill(0,20,lcddev.width,lcddev.height-20,WHITE);
for (i=0; i<5; i++)
{
POINT_COLOR=ColorTab[i];
LCD_DrawRectangle(lcddev.width/2-40+(i*16),lcddev.height/2-40+(i*13),lcddev.width/2-40+(i*16)+30,lcddev.height/2-40+(i*13)+30);
}
HAL_Delay(1500);
LCD_Fill(0,20,lcddev.width,lcddev.height-20,WHITE);
for (i=0; i<5; i++)
{
POINT_COLOR=ColorTab[i];
LCD_DrawFillRectangle(lcddev.width/2-40+(i*16),lcddev.height/2-40+(i*13),lcddev.width/2-40+(i*16)+30,lcddev.height/2-40+(i*13)+30);
}
HAL_Delay(1500);
}
/*****************************************************************************
* @name :void Test_Circle(void)
* @date :2018-08-09
* @function :circular display and fill test
Display red,green,blue,yellow,pink circular boxes in turn,
1500 milliseconds later,
Fill the circular in red,green,blue,yellow and pink in turn
* @parameters :None
* @retvalue :None
******************************************************************************/
void Test_Circle(void)
{
uint8_t i=0;
DrawTestPage("GUI画圆填充测试");
LCD_Fill(0,20,lcddev.width,lcddev.height-20,WHITE);
for (i=0; i<5; i++)
gui_circle(lcddev.width/2-40+(i*15),lcddev.height/2-25+(i*13),ColorTab[i],15,0);
HAL_Delay(1500);
LCD_Fill(0,20,lcddev.width,lcddev.height-20,WHITE);
for (i=0; i<5; i++)
gui_circle(lcddev.width/2-40+(i*15),lcddev.height/2-25+(i*13),ColorTab[i],15,1);
HAL_Delay(1500);
}
/*****************************************************************************
* @name :void English_Font_test(void)
* @date :2018-08-09
* @function :English display test
* @parameters :None
* @retvalue :None
******************************************************************************/
void English_Font_test(void)
{
DrawTestPage("英文显示测试");
Show_Str(10,22,BLUE,YELLOW,"6X12:abcdefgh01234567",12,0);
Show_Str(10,34,BLUE,YELLOW,"6X12:ABCDEFGH01234567",12,1);
Show_Str(10,47,BLUE,YELLOW,"6X12:~!@#$%^&*()_+{}:",12,0);
Show_Str(10,60,BLUE,YELLOW,"8X16:abcde01234",16,0);
Show_Str(10,76,BLUE,YELLOW,"8X16:ABCDE01234",16,1);
Show_Str(10,92,BLUE,YELLOW,"8X16:~!@#$%^&*()",16,0);
HAL_Delay(1200);
}
/*****************************************************************************
* @name :void Test_Triangle(void)
* @date :2018-08-09
* @function :triangle display and fill test
Display red,green,blue,yellow,pink triangle boxes in turn,
1500 milliseconds later,
Fill the triangle in red,green,blue,yellow and pink in turn
* @parameters :None
* @retvalue :None
******************************************************************************/
void Test_Triangle(void)
{
uint8_t i=0;
DrawTestPage("GUI Tri填充测试");
LCD_Fill(0,20,lcddev.width,lcddev.height-20,WHITE);
for(i=0;i<5;i++)
{
POINT_COLOR=ColorTab[i];
Draw_Triangel(lcddev.width/2-40+(i*15),lcddev.height/2-12+(i*11),lcddev.width/2-25-1+(i*15),lcddev.height/2-12-26-1+(i*11),lcddev.width/2-10-1+(i*15),lcddev.height/2-12+(i*11));
}
HAL_Delay(1500);
LCD_Fill(0,20,lcddev.width,lcddev.height-20,WHITE);
for(i=0;i<5;i++)
{
POINT_COLOR=ColorTab[i];
Fill_Triangel(lcddev.width/2-40+(i*15),lcddev.height/2-12+(i*11),lcddev.width/2-25-1+(i*15),lcddev.height/2-12-26-1+(i*11),lcddev.width/2-10-1+(i*15),lcddev.height/2-12+(i*11));
}
HAL_Delay(1500);
}
/*****************************************************************************
* @name :void Chinese_Font_test(void)
* @date :2018-08-09
* @function :chinese display test
* @parameters :None
* @retvalue :None
******************************************************************************/
void Chinese_Font_test(void)
{
DrawTestPage("中文显示测试");
Show_Str(10,25,BLUE,YELLOW,"16X16:全动电子欢迎",16,0);
Show_Str(10,45,BLUE,YELLOW,"24X24:中文测试",24,1);
Show_Str(10,70,BLUE,YELLOW,"32X32:字体测试",32,1);
HAL_Delay(1200);
}
/*****************************************************************************
* @name :void Pic_test(void)
* @date :2018-08-09
* @function :picture display test
* @parameters :None
* @retvalue :None
******************************************************************************/
void Pic_test(void)
{
DrawTestPage("图片显示测试");
//LCD_Fill(0,20,lcddev.width,lcddev.height-20,WHITE);
Gui_Drawbmp16(20,30,gImage_qq);
Show_Str(20+12,75,BLUE,YELLOW,"QQ",16,1);
Gui_Drawbmp16(70,30,gImage_qq);
Show_Str(70+12,75,BLUE,YELLOW,"QQ",16,1);
// Gui_Drawbmp16(150,30,gImage_qq);
// Show_Str(150+12,75,BLUE,YELLOW,"QQ",16,1);
HAL_Delay(1200);
}
/*****************************************************************************
* @name :void Rotate_Test(void)
* @date :2018-08-09
* @function :rotate test
* @parameters :None
* @retvalue :None
******************************************************************************/
void Rotate_Test(void)
{
uint8_t i=0;
uint8_t *Direction[4]={"Rotation:0","Rotation:90","Rotation:180","Rotation:270"};
for(i=0;i<4;i++)
{
LCD_direction(i);
DrawTestPage("屏幕旋转测试");
Show_Str(20,30,BLUE,YELLOW,Direction[i],16,1);
Gui_Drawbmp16(30,50,gImage_qq);
HAL_Delay(1000);HAL_Delay(1000);
}
LCD_direction(USE_HORIZONTAL);
}