diff --git a/FinalHomework/.mxproject b/FinalHomework/.mxproject
index 115be73..fa7a18b 100644
--- a/FinalHomework/.mxproject
+++ b/FinalHomework/.mxproject
@@ -1,3 +1,11 @@
+[PreviousLibFiles]
+LibFiles=Drivers\STM32G4xx_HAL_Driver\Inc\stm32g4xx_hal_spi.h;Drivers\STM32G4xx_HAL_Driver\Inc\stm32g4xx_ll_spi.h;Drivers\STM32G4xx_HAL_Driver\Inc\stm32g4xx_hal_spi_ex.h;Drivers\STM32G4xx_HAL_Driver\Inc\stm32g4xx_hal.h;Drivers\STM32G4xx_HAL_Driver\Inc\stm32g4xx_hal_def.h;Drivers\STM32G4xx_HAL_Driver\Inc\Legacy\stm32_hal_legacy.h;Drivers\STM32G4xx_HAL_Driver\Inc\stm32g4xx_hal_rcc.h;Drivers\STM32G4xx_HAL_Driver\Inc\stm32g4xx_hal_rcc_ex.h;Drivers\STM32G4xx_HAL_Driver\Inc\stm32g4xx_ll_bus.h;Drivers\STM32G4xx_HAL_Driver\Inc\stm32g4xx_ll_rcc.h;Drivers\STM32G4xx_HAL_Driver\Inc\stm32g4xx_ll_system.h;Drivers\STM32G4xx_HAL_Driver\Inc\stm32g4xx_ll_utils.h;Drivers\STM32G4xx_HAL_Driver\Inc\stm32g4xx_ll_crs.h;Drivers\STM32G4xx_HAL_Driver\Inc\stm32g4xx_hal_flash.h;Drivers\STM32G4xx_HAL_Driver\Inc\stm32g4xx_hal_flash_ex.h;Drivers\STM32G4xx_HAL_Driver\Inc\stm32g4xx_hal_flash_ramfunc.h;Drivers\STM32G4xx_HAL_Driver\Inc\stm32g4xx_hal_gpio.h;Drivers\STM32G4xx_HAL_Driver\Inc\stm32g4xx_hal_gpio_ex.h;Drivers\STM32G4xx_HAL_Driver\Inc\stm32g4xx_ll_gpio.h;Drivers\STM32G4xx_HAL_Driver\Inc\stm32g4xx_hal_exti.h;Drivers\STM32G4xx_HAL_Driver\Inc\stm32g4xx_ll_exti.h;Drivers\STM32G4xx_HAL_Driver\Inc\stm32g4xx_hal_dma.h;Drivers\STM32G4xx_HAL_Driver\Inc\stm32g4xx_hal_dma_ex.h;Drivers\STM32G4xx_HAL_Driver\Inc\stm32g4xx_ll_dma.h;Drivers\STM32G4xx_HAL_Driver\Inc\stm32g4xx_ll_dmamux.h;Drivers\STM32G4xx_HAL_Driver\Inc\stm32g4xx_hal_pwr.h;Drivers\STM32G4xx_HAL_Driver\Inc\stm32g4xx_hal_pwr_ex.h;Drivers\STM32G4xx_HAL_Driver\Inc\stm32g4xx_ll_pwr.h;Drivers\STM32G4xx_HAL_Driver\Inc\stm32g4xx_hal_cortex.h;Drivers\STM32G4xx_HAL_Driver\Inc\stm32g4xx_ll_cortex.h;Drivers\STM32G4xx_HAL_Driver\Inc\stm32g4xx_hal_tim.h;Drivers\STM32G4xx_HAL_Driver\Inc\stm32g4xx_hal_tim_ex.h;Drivers\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_spi.c;Drivers\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_spi_ex.c;Drivers\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal.c;Drivers\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_rcc.c;Drivers\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_rcc_ex.c;Drivers\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_flash.c;Drivers\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_flash_ex.c;Drivers\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_flash_ramfunc.c;Drivers\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_gpio.c;Drivers\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_exti.c;Drivers\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_dma.c;Drivers\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_dma_ex.c;Drivers\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_pwr.c;Drivers\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_pwr_ex.c;Drivers\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_cortex.c;Drivers\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_tim.c;Drivers\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_tim_ex.c;Drivers\STM32G4xx_HAL_Driver\Inc\stm32g4xx_hal_spi.h;Drivers\STM32G4xx_HAL_Driver\Inc\stm32g4xx_ll_spi.h;Drivers\STM32G4xx_HAL_Driver\Inc\stm32g4xx_hal_spi_ex.h;Drivers\STM32G4xx_HAL_Driver\Inc\stm32g4xx_hal.h;Drivers\STM32G4xx_HAL_Driver\Inc\stm32g4xx_hal_def.h;Drivers\STM32G4xx_HAL_Driver\Inc\Legacy\stm32_hal_legacy.h;Drivers\STM32G4xx_HAL_Driver\Inc\stm32g4xx_hal_rcc.h;Drivers\STM32G4xx_HAL_Driver\Inc\stm32g4xx_hal_rcc_ex.h;Drivers\STM32G4xx_HAL_Driver\Inc\stm32g4xx_ll_bus.h;Drivers\STM32G4xx_HAL_Driver\Inc\stm32g4xx_ll_rcc.h;Drivers\STM32G4xx_HAL_Driver\Inc\stm32g4xx_ll_system.h;Drivers\STM32G4xx_HAL_Driver\Inc\stm32g4xx_ll_utils.h;Drivers\STM32G4xx_HAL_Driver\Inc\stm32g4xx_ll_crs.h;Drivers\STM32G4xx_HAL_Driver\Inc\stm32g4xx_hal_flash.h;Drivers\STM32G4xx_HAL_Driver\Inc\stm32g4xx_hal_flash_ex.h;Drivers\STM32G4xx_HAL_Driver\Inc\stm32g4xx_hal_flash_ramfunc.h;Drivers\STM32G4xx_HAL_Driver\Inc\stm32g4xx_hal_gpio.h;Drivers\STM32G4xx_HAL_Driver\Inc\stm32g4xx_hal_gpio_ex.h;Drivers\STM32G4xx_HAL_Driver\Inc\stm32g4xx_ll_gpio.h;Drivers\STM32G4xx_HAL_Driver\Inc\stm32g4xx_hal_exti.h;Drivers\STM32G4xx_HAL_Driver\Inc\stm32g4xx_ll_exti.h;Drivers\STM32G4xx_HAL_Driver\Inc\stm32g4xx_hal_dma.h;Drivers\STM32G4xx_HAL_Driver\Inc\stm32g4xx_hal_dma_ex.h;Drivers\STM32G4xx_HAL_Driver\Inc\stm32g4xx_ll_dma.h;Drivers\STM32G4xx_HAL_Driver\Inc\stm32g4xx_ll_dmamux.h;Drivers\STM32G4xx_HAL_Driver\Inc\stm32g4xx_hal_pwr.h;Drivers\STM32G4xx_HAL_Driver\Inc\stm32g4xx_hal_pwr_ex.h;Drivers\STM32G4xx_HAL_Driver\Inc\stm32g4xx_ll_pwr.h;Drivers\STM32G4xx_HAL_Driver\Inc\stm32g4xx_hal_cortex.h;Drivers\STM32G4xx_HAL_Driver\Inc\stm32g4xx_ll_cortex.h;Drivers\STM32G4xx_HAL_Driver\Inc\stm32g4xx_hal_tim.h;Drivers\STM32G4xx_HAL_Driver\Inc\stm32g4xx_hal_tim_ex.h;Drivers\CMSIS\Device\ST\STM32G4xx\Include\stm32g473xx.h;Drivers\CMSIS\Device\ST\STM32G4xx\Include\stm32g4xx.h;Drivers\CMSIS\Device\ST\STM32G4xx\Include\system_stm32g4xx.h;Drivers\CMSIS\Device\ST\STM32G4xx\Include\system_stm32g4xx.h;Drivers\CMSIS\Device\ST\STM32G4xx\Source\Templates\system_stm32g4xx.c;Drivers\CMSIS\Include\cmsis_armcc.h;Drivers\CMSIS\Include\cmsis_armclang.h;Drivers\CMSIS\Include\cmsis_armclang_ltm.h;Drivers\CMSIS\Include\cmsis_compiler.h;Drivers\CMSIS\Include\cmsis_gcc.h;Drivers\CMSIS\Include\cmsis_iccarm.h;Drivers\CMSIS\Include\cmsis_version.h;Drivers\CMSIS\Include\core_armv81mml.h;Drivers\CMSIS\Include\core_armv8mbl.h;Drivers\CMSIS\Include\core_armv8mml.h;Drivers\CMSIS\Include\core_cm0.h;Drivers\CMSIS\Include\core_cm0plus.h;Drivers\CMSIS\Include\core_cm1.h;Drivers\CMSIS\Include\core_cm23.h;Drivers\CMSIS\Include\core_cm3.h;Drivers\CMSIS\Include\core_cm33.h;Drivers\CMSIS\Include\core_cm35p.h;Drivers\CMSIS\Include\core_cm4.h;Drivers\CMSIS\Include\core_cm7.h;Drivers\CMSIS\Include\core_sc000.h;Drivers\CMSIS\Include\core_sc300.h;Drivers\CMSIS\Include\mpu_armv7.h;Drivers\CMSIS\Include\mpu_armv8.h;Drivers\CMSIS\Include\tz_context.h;
+
+[PreviousUsedKeilFiles]
+SourceFiles=..\Core\Src\main.c;..\Core\Src\gpio.c;..\Core\Src\spi.c;..\Core\Src\stm32g4xx_it.c;..\Core\Src\stm32g4xx_hal_msp.c;..\Drivers\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_spi.c;..\Drivers\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_spi_ex.c;..\Drivers\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal.c;..\Drivers\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_rcc.c;..\Drivers\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_rcc_ex.c;..\Drivers\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_flash.c;..\Drivers\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_flash_ex.c;..\Drivers\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_flash_ramfunc.c;..\Drivers\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_gpio.c;..\Drivers\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_exti.c;..\Drivers\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_dma.c;..\Drivers\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_dma_ex.c;..\Drivers\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_pwr.c;..\Drivers\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_pwr_ex.c;..\Drivers\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_cortex.c;..\Drivers\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_tim.c;..\Drivers\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_tim_ex.c;..\Drivers\CMSIS\Device\ST\STM32G4xx\Source\Templates\system_stm32g4xx.c;..\Core\Src\system_stm32g4xx.c;..\Drivers\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_spi.c;..\Drivers\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_spi_ex.c;..\Drivers\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal.c;..\Drivers\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_rcc.c;..\Drivers\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_rcc_ex.c;..\Drivers\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_flash.c;..\Drivers\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_flash_ex.c;..\Drivers\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_flash_ramfunc.c;..\Drivers\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_gpio.c;..\Drivers\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_exti.c;..\Drivers\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_dma.c;..\Drivers\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_dma_ex.c;..\Drivers\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_pwr.c;..\Drivers\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_pwr_ex.c;..\Drivers\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_cortex.c;..\Drivers\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_tim.c;..\Drivers\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_tim_ex.c;..\Drivers\CMSIS\Device\ST\STM32G4xx\Source\Templates\system_stm32g4xx.c;..\Core\Src\system_stm32g4xx.c;;;
+HeaderPath=..\Drivers\STM32G4xx_HAL_Driver\Inc;..\Drivers\STM32G4xx_HAL_Driver\Inc\Legacy;..\Drivers\CMSIS\Device\ST\STM32G4xx\Include;..\Drivers\CMSIS\Include;..\Core\Inc;
+CDefines=USE_HAL_DRIVER;STM32G473xx;USE_HAL_DRIVER;USE_HAL_DRIVER;
+
 [PreviousGenFiles]
 AdvancedFolderStructure=true
 HeaderFileListSize=5
@@ -19,11 +27,3 @@ SourceFolderListSize=1
 SourcePath#0=..\Core\Src
 SourceFiles=;
 
-[PreviousLibFiles]
-LibFiles=Drivers\STM32G4xx_HAL_Driver\Inc\stm32g4xx_hal_spi.h;Drivers\STM32G4xx_HAL_Driver\Inc\stm32g4xx_ll_spi.h;Drivers\STM32G4xx_HAL_Driver\Inc\stm32g4xx_hal_spi_ex.h;Drivers\STM32G4xx_HAL_Driver\Inc\stm32g4xx_hal.h;Drivers\STM32G4xx_HAL_Driver\Inc\stm32g4xx_hal_def.h;Drivers\STM32G4xx_HAL_Driver\Inc\Legacy\stm32_hal_legacy.h;Drivers\STM32G4xx_HAL_Driver\Inc\stm32g4xx_hal_rcc.h;Drivers\STM32G4xx_HAL_Driver\Inc\stm32g4xx_hal_rcc_ex.h;Drivers\STM32G4xx_HAL_Driver\Inc\stm32g4xx_ll_bus.h;Drivers\STM32G4xx_HAL_Driver\Inc\stm32g4xx_ll_rcc.h;Drivers\STM32G4xx_HAL_Driver\Inc\stm32g4xx_ll_system.h;Drivers\STM32G4xx_HAL_Driver\Inc\stm32g4xx_ll_utils.h;Drivers\STM32G4xx_HAL_Driver\Inc\stm32g4xx_ll_crs.h;Drivers\STM32G4xx_HAL_Driver\Inc\stm32g4xx_hal_flash.h;Drivers\STM32G4xx_HAL_Driver\Inc\stm32g4xx_hal_flash_ex.h;Drivers\STM32G4xx_HAL_Driver\Inc\stm32g4xx_hal_flash_ramfunc.h;Drivers\STM32G4xx_HAL_Driver\Inc\stm32g4xx_hal_gpio.h;Drivers\STM32G4xx_HAL_Driver\Inc\stm32g4xx_hal_gpio_ex.h;Drivers\STM32G4xx_HAL_Driver\Inc\stm32g4xx_ll_gpio.h;Drivers\STM32G4xx_HAL_Driver\Inc\stm32g4xx_hal_exti.h;Drivers\STM32G4xx_HAL_Driver\Inc\stm32g4xx_ll_exti.h;Drivers\STM32G4xx_HAL_Driver\Inc\stm32g4xx_hal_dma.h;Drivers\STM32G4xx_HAL_Driver\Inc\stm32g4xx_hal_dma_ex.h;Drivers\STM32G4xx_HAL_Driver\Inc\stm32g4xx_ll_dma.h;Drivers\STM32G4xx_HAL_Driver\Inc\stm32g4xx_ll_dmamux.h;Drivers\STM32G4xx_HAL_Driver\Inc\stm32g4xx_hal_pwr.h;Drivers\STM32G4xx_HAL_Driver\Inc\stm32g4xx_hal_pwr_ex.h;Drivers\STM32G4xx_HAL_Driver\Inc\stm32g4xx_ll_pwr.h;Drivers\STM32G4xx_HAL_Driver\Inc\stm32g4xx_hal_cortex.h;Drivers\STM32G4xx_HAL_Driver\Inc\stm32g4xx_ll_cortex.h;Drivers\STM32G4xx_HAL_Driver\Inc\stm32g4xx_hal_tim.h;Drivers\STM32G4xx_HAL_Driver\Inc\stm32g4xx_hal_tim_ex.h;Drivers\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_spi.c;Drivers\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_spi_ex.c;Drivers\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal.c;Drivers\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_rcc.c;Drivers\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_rcc_ex.c;Drivers\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_flash.c;Drivers\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_flash_ex.c;Drivers\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_flash_ramfunc.c;Drivers\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_gpio.c;Drivers\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_exti.c;Drivers\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_dma.c;Drivers\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_dma_ex.c;Drivers\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_pwr.c;Drivers\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_pwr_ex.c;Drivers\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_cortex.c;Drivers\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_tim.c;Drivers\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_tim_ex.c;Drivers\STM32G4xx_HAL_Driver\Inc\stm32g4xx_hal_spi.h;Drivers\STM32G4xx_HAL_Driver\Inc\stm32g4xx_ll_spi.h;Drivers\STM32G4xx_HAL_Driver\Inc\stm32g4xx_hal_spi_ex.h;Drivers\STM32G4xx_HAL_Driver\Inc\stm32g4xx_hal.h;Drivers\STM32G4xx_HAL_Driver\Inc\stm32g4xx_hal_def.h;Drivers\STM32G4xx_HAL_Driver\Inc\Legacy\stm32_hal_legacy.h;Drivers\STM32G4xx_HAL_Driver\Inc\stm32g4xx_hal_rcc.h;Drivers\STM32G4xx_HAL_Driver\Inc\stm32g4xx_hal_rcc_ex.h;Drivers\STM32G4xx_HAL_Driver\Inc\stm32g4xx_ll_bus.h;Drivers\STM32G4xx_HAL_Driver\Inc\stm32g4xx_ll_rcc.h;Drivers\STM32G4xx_HAL_Driver\Inc\stm32g4xx_ll_system.h;Drivers\STM32G4xx_HAL_Driver\Inc\stm32g4xx_ll_utils.h;Drivers\STM32G4xx_HAL_Driver\Inc\stm32g4xx_ll_crs.h;Drivers\STM32G4xx_HAL_Driver\Inc\stm32g4xx_hal_flash.h;Drivers\STM32G4xx_HAL_Driver\Inc\stm32g4xx_hal_flash_ex.h;Drivers\STM32G4xx_HAL_Driver\Inc\stm32g4xx_hal_flash_ramfunc.h;Drivers\STM32G4xx_HAL_Driver\Inc\stm32g4xx_hal_gpio.h;Drivers\STM32G4xx_HAL_Driver\Inc\stm32g4xx_hal_gpio_ex.h;Drivers\STM32G4xx_HAL_Driver\Inc\stm32g4xx_ll_gpio.h;Drivers\STM32G4xx_HAL_Driver\Inc\stm32g4xx_hal_exti.h;Drivers\STM32G4xx_HAL_Driver\Inc\stm32g4xx_ll_exti.h;Drivers\STM32G4xx_HAL_Driver\Inc\stm32g4xx_hal_dma.h;Drivers\STM32G4xx_HAL_Driver\Inc\stm32g4xx_hal_dma_ex.h;Drivers\STM32G4xx_HAL_Driver\Inc\stm32g4xx_ll_dma.h;Drivers\STM32G4xx_HAL_Driver\Inc\stm32g4xx_ll_dmamux.h;Drivers\STM32G4xx_HAL_Driver\Inc\stm32g4xx_hal_pwr.h;Drivers\STM32G4xx_HAL_Driver\Inc\stm32g4xx_hal_pwr_ex.h;Drivers\STM32G4xx_HAL_Driver\Inc\stm32g4xx_ll_pwr.h;Drivers\STM32G4xx_HAL_Driver\Inc\stm32g4xx_hal_cortex.h;Drivers\STM32G4xx_HAL_Driver\Inc\stm32g4xx_ll_cortex.h;Drivers\STM32G4xx_HAL_Driver\Inc\stm32g4xx_hal_tim.h;Drivers\STM32G4xx_HAL_Driver\Inc\stm32g4xx_hal_tim_ex.h;Drivers\CMSIS\Device\ST\STM32G4xx\Include\stm32g473xx.h;Drivers\CMSIS\Device\ST\STM32G4xx\Include\stm32g4xx.h;Drivers\CMSIS\Device\ST\STM32G4xx\Include\system_stm32g4xx.h;Drivers\CMSIS\Device\ST\STM32G4xx\Include\system_stm32g4xx.h;Drivers\CMSIS\Device\ST\STM32G4xx\Source\Templates\system_stm32g4xx.c;Drivers\CMSIS\Include\cmsis_armcc.h;Drivers\CMSIS\Include\cmsis_armclang.h;Drivers\CMSIS\Include\cmsis_armclang_ltm.h;Drivers\CMSIS\Include\cmsis_compiler.h;Drivers\CMSIS\Include\cmsis_gcc.h;Drivers\CMSIS\Include\cmsis_iccarm.h;Drivers\CMSIS\Include\cmsis_version.h;Drivers\CMSIS\Include\core_armv81mml.h;Drivers\CMSIS\Include\core_armv8mbl.h;Drivers\CMSIS\Include\core_armv8mml.h;Drivers\CMSIS\Include\core_cm0.h;Drivers\CMSIS\Include\core_cm0plus.h;Drivers\CMSIS\Include\core_cm1.h;Drivers\CMSIS\Include\core_cm23.h;Drivers\CMSIS\Include\core_cm3.h;Drivers\CMSIS\Include\core_cm33.h;Drivers\CMSIS\Include\core_cm35p.h;Drivers\CMSIS\Include\core_cm4.h;Drivers\CMSIS\Include\core_cm7.h;Drivers\CMSIS\Include\core_sc000.h;Drivers\CMSIS\Include\core_sc300.h;Drivers\CMSIS\Include\mpu_armv7.h;Drivers\CMSIS\Include\mpu_armv8.h;Drivers\CMSIS\Include\tz_context.h;
-
-[PreviousUsedKeilFiles]
-SourceFiles=..\Core\Src\main.c;..\Core\Src\gpio.c;..\Core\Src\spi.c;..\Core\Src\stm32g4xx_it.c;..\Core\Src\stm32g4xx_hal_msp.c;..\Drivers\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_spi.c;..\Drivers\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_spi_ex.c;..\Drivers\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal.c;..\Drivers\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_rcc.c;..\Drivers\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_rcc_ex.c;..\Drivers\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_flash.c;..\Drivers\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_flash_ex.c;..\Drivers\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_flash_ramfunc.c;..\Drivers\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_gpio.c;..\Drivers\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_exti.c;..\Drivers\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_dma.c;..\Drivers\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_dma_ex.c;..\Drivers\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_pwr.c;..\Drivers\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_pwr_ex.c;..\Drivers\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_cortex.c;..\Drivers\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_tim.c;..\Drivers\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_tim_ex.c;..\Drivers\CMSIS\Device\ST\STM32G4xx\Source\Templates\system_stm32g4xx.c;..\Core\Src\system_stm32g4xx.c;..\Drivers\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_spi.c;..\Drivers\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_spi_ex.c;..\Drivers\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal.c;..\Drivers\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_rcc.c;..\Drivers\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_rcc_ex.c;..\Drivers\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_flash.c;..\Drivers\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_flash_ex.c;..\Drivers\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_flash_ramfunc.c;..\Drivers\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_gpio.c;..\Drivers\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_exti.c;..\Drivers\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_dma.c;..\Drivers\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_dma_ex.c;..\Drivers\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_pwr.c;..\Drivers\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_pwr_ex.c;..\Drivers\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_cortex.c;..\Drivers\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_tim.c;..\Drivers\STM32G4xx_HAL_Driver\Src\stm32g4xx_hal_tim_ex.c;..\Drivers\CMSIS\Device\ST\STM32G4xx\Source\Templates\system_stm32g4xx.c;..\Core\Src\system_stm32g4xx.c;;;
-HeaderPath=..\Drivers\STM32G4xx_HAL_Driver\Inc;..\Drivers\STM32G4xx_HAL_Driver\Inc\Legacy;..\Drivers\CMSIS\Device\ST\STM32G4xx\Include;..\Drivers\CMSIS\Include;..\Core\Inc;
-CDefines=USE_HAL_DRIVER;STM32G473xx;USE_HAL_DRIVER;USE_HAL_DRIVER;
-
diff --git a/FinalHomework/Core/Inc/FONT.H b/FinalHomework/Core/Inc/FONT.H
new file mode 100644
index 0000000..14c8bc3
--- /dev/null
+++ b/FinalHomework/Core/Inc/FONT.H
@@ -0,0 +1,439 @@
+/****************************************************************************************************
+//=========================================电源接线================================================//
+//     LCD模块                STM32单片机
+//      VCC          接        DC5V/3.3V      //电源
+//      GND          接          GND          //电源地
+//=======================================液晶屏数据线接线==========================================//
+//本模块默认数据总线类型为SPI总线
+//     LCD模块                STM32单片机    
+//       SDA         接          PB15         //液晶屏SPI总线数据写信号
+//=======================================液晶屏控制线接线==========================================//
+//     LCD模块 					      STM32单片机 
+//       LED         接          PB9          //液晶屏背光控制信号，如果不需要控制，接5V或3.3V
+//       SCK         接          PB13         //液晶屏SPI总线时钟信号
+//       A0          接          PB10         //液晶屏数据/命令控制信号
+//       RESET       接          PB12         //液晶屏复位控制信号
+//       CS          接          PB11         //液晶屏片选控制信号
+**************************************************************************************************/	
+ /* @attention
+  *
+  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+  * TIME. AS A RESULT, QD electronic SHALL NOT BE HELD LIABLE FOR ANY
+  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+**************************************************************************************************/		
+
+#ifndef __FONT_H
+#define __FONT_H 	   
+//常用ASCII表
+//偏移量32
+//ASCII字符集
+//偏移量32
+//大小:12*6
+const unsigned char asc2_1206[95][12]={
+{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},/*" ",0*/
+{0x00,0x00,0x04,0x04,0x04,0x04,0x04,0x04,0x00,0x04,0x00,0x00},/*"!",1*/
+{0x00,0x14,0x0A,0x0A,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},/*""",2*/
+{0x00,0x00,0x14,0x14,0x3F,0x14,0x0A,0x3F,0x0A,0x0A,0x00,0x00},/*"#",3*/
+{0x00,0x04,0x1E,0x15,0x05,0x06,0x0C,0x14,0x15,0x0F,0x04,0x00},/*"$",4*/
+{0x00,0x00,0x12,0x15,0x0D,0x0A,0x14,0x2C,0x2A,0x12,0x00,0x00},/*"%",5*/
+{0x00,0x00,0x04,0x0A,0x0A,0x1E,0x15,0x15,0x09,0x36,0x00,0x00},/*"&",6*/
+{0x00,0x02,0x02,0x01,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},/*"'",7*/
+{0x00,0x20,0x10,0x08,0x08,0x08,0x08,0x08,0x08,0x10,0x20,0x00},/*"(",8*/
+{0x00,0x02,0x04,0x08,0x08,0x08,0x08,0x08,0x08,0x04,0x02,0x00},/*")",9*/
+{0x00,0x00,0x00,0x04,0x15,0x0E,0x0E,0x15,0x04,0x00,0x00,0x00},/*"*",10*/
+{0x00,0x00,0x04,0x04,0x04,0x1F,0x04,0x04,0x04,0x00,0x00,0x00},/*"+",11*/
+{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x02,0x02,0x01},/*",",12*/
+{0x00,0x00,0x00,0x00,0x00,0x1F,0x00,0x00,0x00,0x00,0x00,0x00},/*"-",13*/
+{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x02,0x00,0x00},/*".",14*/
+{0x00,0x10,0x08,0x08,0x08,0x04,0x04,0x02,0x02,0x02,0x01,0x00},/*"/",15*/
+{0x00,0x00,0x0E,0x11,0x11,0x11,0x11,0x11,0x11,0x0E,0x00,0x00},/*"0",16*/
+{0x00,0x00,0x04,0x06,0x04,0x04,0x04,0x04,0x04,0x0E,0x00,0x00},/*"1",17*/
+{0x00,0x00,0x0E,0x11,0x11,0x08,0x04,0x02,0x01,0x1F,0x00,0x00},/*"2",18*/
+{0x00,0x00,0x0E,0x11,0x10,0x0C,0x10,0x10,0x11,0x0E,0x00,0x00},/*"3",19*/
+{0x00,0x00,0x08,0x0C,0x0A,0x0A,0x09,0x1E,0x08,0x18,0x00,0x00},/*"4",20*/
+{0x00,0x00,0x1F,0x01,0x01,0x0F,0x10,0x10,0x11,0x0E,0x00,0x00},/*"5",21*/
+{0x00,0x00,0x0E,0x09,0x01,0x0F,0x11,0x11,0x11,0x0E,0x00,0x00},/*"6",22*/
+{0x00,0x00,0x1F,0x09,0x08,0x04,0x04,0x04,0x04,0x04,0x00,0x00},/*"7",23*/
+{0x00,0x00,0x0E,0x11,0x11,0x0E,0x11,0x11,0x11,0x0E,0x00,0x00},/*"8",24*/
+{0x00,0x00,0x0E,0x11,0x11,0x11,0x1E,0x10,0x12,0x0E,0x00,0x00},/*"9",25*/
+{0x00,0x00,0x00,0x00,0x04,0x00,0x00,0x00,0x00,0x04,0x00,0x00},/*":",26*/
+{0x00,0x00,0x00,0x00,0x00,0x04,0x00,0x00,0x00,0x04,0x04,0x00},/*";",27*/
+{0x00,0x20,0x10,0x08,0x04,0x02,0x04,0x08,0x10,0x20,0x00,0x00},/*"<",28*/
+{0x00,0x00,0x00,0x00,0x1F,0x00,0x00,0x1F,0x00,0x00,0x00,0x00},/*"=",29*/
+{0x00,0x02,0x04,0x08,0x10,0x20,0x10,0x08,0x04,0x02,0x00,0x00},/*">",30*/
+{0x00,0x00,0x0E,0x11,0x11,0x08,0x04,0x04,0x00,0x04,0x00,0x00},/*"?",31*/
+{0x00,0x00,0x0E,0x11,0x19,0x15,0x15,0x1D,0x01,0x1E,0x00,0x00},/*"@",32*/
+{0x00,0x00,0x04,0x04,0x0C,0x0A,0x0A,0x1E,0x12,0x33,0x00,0x00},/*"A",33*/
+{0x00,0x00,0x0F,0x12,0x12,0x0E,0x12,0x12,0x12,0x0F,0x00,0x00},/*"B",34*/
+{0x00,0x00,0x1E,0x11,0x01,0x01,0x01,0x01,0x11,0x0E,0x00,0x00},/*"C",35*/
+{0x00,0x00,0x0F,0x12,0x12,0x12,0x12,0x12,0x12,0x0F,0x00,0x00},/*"D",36*/
+{0x00,0x00,0x1F,0x12,0x0A,0x0E,0x0A,0x02,0x12,0x1F,0x00,0x00},/*"E",37*/
+{0x00,0x00,0x1F,0x12,0x0A,0x0E,0x0A,0x02,0x02,0x07,0x00,0x00},/*"F",38*/
+{0x00,0x00,0x1C,0x12,0x01,0x01,0x39,0x11,0x12,0x0C,0x00,0x00},/*"G",39*/
+{0x00,0x00,0x33,0x12,0x12,0x1E,0x12,0x12,0x12,0x33,0x00,0x00},/*"H",40*/
+{0x00,0x00,0x1F,0x04,0x04,0x04,0x04,0x04,0x04,0x1F,0x00,0x00},/*"I",41*/
+{0x00,0x00,0x3E,0x08,0x08,0x08,0x08,0x08,0x08,0x09,0x07,0x00},/*"J",42*/
+{0x00,0x00,0x37,0x12,0x0A,0x06,0x0A,0x0A,0x12,0x37,0x00,0x00},/*"K",43*/
+{0x00,0x00,0x07,0x02,0x02,0x02,0x02,0x02,0x22,0x3F,0x00,0x00},/*"L",44*/
+{0x00,0x00,0x1B,0x1B,0x1B,0x1B,0x15,0x15,0x15,0x15,0x00,0x00},/*"M",45*/
+{0x00,0x00,0x3B,0x12,0x16,0x16,0x1A,0x1A,0x12,0x17,0x00,0x00},/*"N",46*/
+{0x00,0x00,0x0E,0x11,0x11,0x11,0x11,0x11,0x11,0x0E,0x00,0x00},/*"O",47*/
+{0x00,0x00,0x0F,0x12,0x12,0x0E,0x02,0x02,0x02,0x07,0x00,0x00},/*"P",48*/
+{0x00,0x00,0x0E,0x11,0x11,0x11,0x11,0x17,0x19,0x0E,0x18,0x00},/*"Q",49*/
+{0x00,0x00,0x0F,0x12,0x12,0x0E,0x0A,0x12,0x12,0x37,0x00,0x00},/*"R",50*/
+{0x00,0x00,0x1E,0x11,0x01,0x06,0x08,0x10,0x11,0x0F,0x00,0x00},/*"S",51*/
+{0x00,0x00,0x1F,0x15,0x04,0x04,0x04,0x04,0x04,0x0E,0x00,0x00},/*"T",52*/
+{0x00,0x00,0x33,0x12,0x12,0x12,0x12,0x12,0x12,0x0C,0x00,0x00},/*"U",53*/
+{0x00,0x00,0x33,0x12,0x12,0x0A,0x0A,0x0C,0x04,0x04,0x00,0x00},/*"V",54*/
+{0x00,0x00,0x15,0x15,0x15,0x0E,0x0A,0x0A,0x0A,0x0A,0x00,0x00},/*"W",55*/
+{0x00,0x00,0x1B,0x0A,0x0A,0x04,0x04,0x0A,0x0A,0x1B,0x00,0x00},/*"X",56*/
+{0x00,0x00,0x1B,0x0A,0x0A,0x04,0x04,0x04,0x04,0x0E,0x00,0x00},/*"Y",57*/
+{0x00,0x00,0x1F,0x09,0x08,0x04,0x04,0x02,0x12,0x1F,0x00,0x00},/*"Z",58*/
+{0x00,0x1C,0x04,0x04,0x04,0x04,0x04,0x04,0x04,0x04,0x1C,0x00},/*"[",59*/
+{0x00,0x02,0x02,0x02,0x04,0x04,0x08,0x08,0x08,0x10,0x00,0x00},/*"\",60*/
+{0x00,0x0E,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x0E,0x00},/*"]",61*/
+{0x00,0x04,0x0A,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},/*"^",62*/
+{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x3F},/*"_",63*/
+{0x00,0x04,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},/*"`",64*/
+{0x00,0x00,0x00,0x00,0x00,0x0C,0x12,0x1C,0x12,0x3C,0x00,0x00},/*"a",65*/
+{0x00,0x00,0x03,0x02,0x02,0x0E,0x12,0x12,0x12,0x0E,0x00,0x00},/*"b",66*/
+{0x00,0x00,0x00,0x00,0x00,0x1C,0x12,0x02,0x02,0x1C,0x00,0x00},/*"c",67*/
+{0x00,0x00,0x18,0x10,0x10,0x1C,0x12,0x12,0x12,0x3C,0x00,0x00},/*"d",68*/
+{0x00,0x00,0x00,0x00,0x00,0x0C,0x12,0x1E,0x02,0x1C,0x00,0x00},/*"e",69*/
+{0x00,0x00,0x38,0x04,0x04,0x1E,0x04,0x04,0x04,0x1E,0x00,0x00},/*"f",70*/
+{0x00,0x00,0x00,0x00,0x00,0x3C,0x12,0x0C,0x02,0x1E,0x22,0x1C},/*"g",71*/
+{0x00,0x00,0x03,0x02,0x02,0x0E,0x12,0x12,0x12,0x37,0x00,0x00},/*"h",72*/
+{0x00,0x00,0x04,0x00,0x00,0x06,0x04,0x04,0x04,0x0E,0x00,0x00},/*"i",73*/
+{0x00,0x00,0x08,0x00,0x00,0x0C,0x08,0x08,0x08,0x08,0x08,0x07},/*"j",74*/
+{0x00,0x00,0x03,0x02,0x02,0x3A,0x0A,0x0E,0x12,0x37,0x00,0x00},/*"k",75*/
+{0x00,0x00,0x07,0x04,0x04,0x04,0x04,0x04,0x04,0x1F,0x00,0x00},/*"l",76*/
+{0x00,0x00,0x00,0x00,0x00,0x0F,0x15,0x15,0x15,0x15,0x00,0x00},/*"m",77*/
+{0x00,0x00,0x00,0x00,0x00,0x0F,0x12,0x12,0x12,0x37,0x00,0x00},/*"n",78*/
+{0x00,0x00,0x00,0x00,0x00,0x0C,0x12,0x12,0x12,0x0C,0x00,0x00},/*"o",79*/
+{0x00,0x00,0x00,0x00,0x00,0x0F,0x12,0x12,0x12,0x0E,0x02,0x07},/*"p",80*/
+{0x00,0x00,0x00,0x00,0x00,0x1C,0x12,0x12,0x12,0x1C,0x10,0x38},/*"q",81*/
+{0x00,0x00,0x00,0x00,0x00,0x1B,0x06,0x02,0x02,0x07,0x00,0x00},/*"r",82*/
+{0x00,0x00,0x00,0x00,0x00,0x1E,0x02,0x0C,0x10,0x1E,0x00,0x00},/*"s",83*/
+{0x00,0x00,0x00,0x04,0x04,0x0E,0x04,0x04,0x04,0x18,0x00,0x00},/*"t",84*/
+{0x00,0x00,0x00,0x00,0x00,0x1B,0x12,0x12,0x12,0x3C,0x00,0x00},/*"u",85*/
+{0x00,0x00,0x00,0x00,0x00,0x37,0x12,0x0A,0x0C,0x04,0x00,0x00},/*"v",86*/
+{0x00,0x00,0x00,0x00,0x00,0x15,0x15,0x0E,0x0A,0x0A,0x00,0x00},/*"w",87*/
+{0x00,0x00,0x00,0x00,0x00,0x1B,0x0A,0x04,0x0A,0x1B,0x00,0x00},/*"x",88*/
+{0x00,0x00,0x00,0x00,0x00,0x37,0x12,0x0A,0x0C,0x04,0x04,0x03},/*"y",89*/
+{0x00,0x00,0x00,0x00,0x00,0x1E,0x08,0x04,0x04,0x1E,0x00,0x00},/*"z",90*/
+{0x00,0x18,0x08,0x08,0x08,0x04,0x08,0x08,0x08,0x08,0x18,0x00},/*"{",91*/
+{0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x08},/*"|",92*/
+{0x00,0x06,0x04,0x04,0x04,0x08,0x04,0x04,0x04,0x04,0x06,0x00},/*"}",93*/
+{0x02,0x25,0x18,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00} /*"~",94*/
+}; 
+const unsigned char asc2_1608[95][16]={
+{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},/*" ",0*/
+{0x00,0x00,0x00,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x00,0x00,0x18,0x18,0x00,0x00},/*"!",1*/
+{0x00,0x48,0x6C,0x24,0x12,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},/*""",2*/
+{0x00,0x00,0x00,0x24,0x24,0x24,0x7F,0x12,0x12,0x12,0x7F,0x12,0x12,0x12,0x00,0x00},/*"#",3*/
+{0x00,0x00,0x08,0x1C,0x2A,0x2A,0x0A,0x0C,0x18,0x28,0x28,0x2A,0x2A,0x1C,0x08,0x08},/*"$",4*/
+{0x00,0x00,0x00,0x22,0x25,0x15,0x15,0x15,0x2A,0x58,0x54,0x54,0x54,0x22,0x00,0x00},/*"%",5*/
+{0x00,0x00,0x00,0x0C,0x12,0x12,0x12,0x0A,0x76,0x25,0x29,0x11,0x91,0x6E,0x00,0x00},/*"&",6*/
+{0x00,0x06,0x06,0x04,0x03,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},/*"'",7*/
+{0x00,0x40,0x20,0x10,0x10,0x08,0x08,0x08,0x08,0x08,0x08,0x10,0x10,0x20,0x40,0x00},/*"(",8*/
+{0x00,0x02,0x04,0x08,0x08,0x10,0x10,0x10,0x10,0x10,0x10,0x08,0x08,0x04,0x02,0x00},/*")",9*/
+{0x00,0x00,0x00,0x00,0x08,0x08,0x6B,0x1C,0x1C,0x6B,0x08,0x08,0x00,0x00,0x00,0x00},/*"*",10*/
+{0x00,0x00,0x00,0x00,0x08,0x08,0x08,0x08,0x7F,0x08,0x08,0x08,0x08,0x00,0x00,0x00},/*"+",11*/
+{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x06,0x06,0x04,0x03},/*",",12*/
+{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFE,0x00,0x00,0x00,0x00,0x00,0x00,0x00},/*"-",13*/
+{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x06,0x06,0x00,0x00},/*".",14*/
+{0x00,0x00,0x80,0x40,0x40,0x20,0x20,0x10,0x10,0x08,0x08,0x04,0x04,0x02,0x02,0x00},/*"/",15*/
+{0x00,0x00,0x00,0x18,0x24,0x42,0x42,0x42,0x42,0x42,0x42,0x42,0x24,0x18,0x00,0x00},/*"0",16*/
+{0x00,0x00,0x00,0x08,0x0E,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x3E,0x00,0x00},/*"1",17*/
+{0x00,0x00,0x00,0x3C,0x42,0x42,0x42,0x20,0x20,0x10,0x08,0x04,0x42,0x7E,0x00,0x00},/*"2",18*/
+{0x00,0x00,0x00,0x3C,0x42,0x42,0x20,0x18,0x20,0x40,0x40,0x42,0x22,0x1C,0x00,0x00},/*"3",19*/
+{0x00,0x00,0x00,0x20,0x30,0x28,0x24,0x24,0x22,0x22,0x7E,0x20,0x20,0x78,0x00,0x00},/*"4",20*/
+{0x00,0x00,0x00,0x7E,0x02,0x02,0x02,0x1A,0x26,0x40,0x40,0x42,0x22,0x1C,0x00,0x00},/*"5",21*/
+{0x00,0x00,0x00,0x38,0x24,0x02,0x02,0x1A,0x26,0x42,0x42,0x42,0x24,0x18,0x00,0x00},/*"6",22*/
+{0x00,0x00,0x00,0x7E,0x22,0x22,0x10,0x10,0x08,0x08,0x08,0x08,0x08,0x08,0x00,0x00},/*"7",23*/	 
+{0x00,0x00,0x00,0x3C,0x42,0x42,0x42,0x24,0x18,0x24,0x42,0x42,0x42,0x3C,0x00,0x00},/*"8",24*/
+{0x00,0x00,0x00,0x18,0x24,0x42,0x42,0x42,0x64,0x58,0x40,0x40,0x24,0x1C,0x00,0x00},/*"9",25*/
+{0x00,0x00,0x00,0x00,0x00,0x00,0x18,0x18,0x00,0x00,0x00,0x00,0x18,0x18,0x00,0x00},/*":",26*/
+{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x08,0x00,0x00,0x00,0x00,0x00,0x08,0x08,0x04},/*";",27*/
+{0x00,0x00,0x00,0x40,0x20,0x10,0x08,0x04,0x02,0x04,0x08,0x10,0x20,0x40,0x00,0x00},/*"<",28*/
+{0x00,0x00,0x00,0x00,0x00,0x00,0x7F,0x00,0x00,0x00,0x7F,0x00,0x00,0x00,0x00,0x00},/*"=",29*/
+{0x00,0x00,0x00,0x02,0x04,0x08,0x10,0x20,0x40,0x20,0x10,0x08,0x04,0x02,0x00,0x00},/*">",30*/
+{0x00,0x00,0x00,0x3C,0x42,0x42,0x46,0x40,0x20,0x10,0x10,0x00,0x18,0x18,0x00,0x00},/*"?",31*/
+{0x00,0x00,0x00,0x1C,0x22,0x5A,0x55,0x55,0x55,0x55,0x2D,0x42,0x22,0x1C,0x00,0x00},/*"@",32*/
+{0x00,0x00,0x00,0x08,0x08,0x18,0x14,0x14,0x24,0x3C,0x22,0x42,0x42,0xE7,0x00,0x00},/*"A",33*/
+{0x00,0x00,0x00,0x1F,0x22,0x22,0x22,0x1E,0x22,0x42,0x42,0x42,0x22,0x1F,0x00,0x00},/*"B",34*/
+{0x00,0x00,0x00,0x7C,0x42,0x42,0x01,0x01,0x01,0x01,0x01,0x42,0x22,0x1C,0x00,0x00},/*"C",35*/
+{0x00,0x00,0x00,0x1F,0x22,0x42,0x42,0x42,0x42,0x42,0x42,0x42,0x22,0x1F,0x00,0x00},/*"D",36*/
+{0x00,0x00,0x00,0x3F,0x42,0x12,0x12,0x1E,0x12,0x12,0x02,0x42,0x42,0x3F,0x00,0x00},/*"E",37*/
+{0x00,0x00,0x00,0x3F,0x42,0x12,0x12,0x1E,0x12,0x12,0x02,0x02,0x02,0x07,0x00,0x00},/*"F",38*/
+{0x00,0x00,0x00,0x3C,0x22,0x22,0x01,0x01,0x01,0x71,0x21,0x22,0x22,0x1C,0x00,0x00},/*"G",39*/
+{0x00,0x00,0x00,0xE7,0x42,0x42,0x42,0x42,0x7E,0x42,0x42,0x42,0x42,0xE7,0x00,0x00},/*"H",40*/
+{0x00,0x00,0x00,0x3E,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x3E,0x00,0x00},/*"I",41*/
+{0x00,0x00,0x00,0x7C,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x11,0x0F},/*"J",42*/
+{0x00,0x00,0x00,0x77,0x22,0x12,0x0A,0x0E,0x0A,0x12,0x12,0x22,0x22,0x77,0x00,0x00},/*"K",43*/
+{0x00,0x00,0x00,0x07,0x02,0x02,0x02,0x02,0x02,0x02,0x02,0x02,0x42,0x7F,0x00,0x00},/*"L",44*/
+{0x00,0x00,0x00,0x77,0x36,0x36,0x36,0x36,0x2A,0x2A,0x2A,0x2A,0x2A,0x6B,0x00,0x00},/*"M",45*/
+{0x00,0x00,0x00,0xE3,0x46,0x46,0x4A,0x4A,0x52,0x52,0x52,0x62,0x62,0x47,0x00,0x00},/*"N",46*/
+{0x00,0x00,0x00,0x1C,0x22,0x41,0x41,0x41,0x41,0x41,0x41,0x41,0x22,0x1C,0x00,0x00},/*"O",47*/
+{0x00,0x00,0x00,0x3F,0x42,0x42,0x42,0x42,0x3E,0x02,0x02,0x02,0x02,0x07,0x00,0x00},/*"P",48*/
+{0x00,0x00,0x00,0x1C,0x22,0x41,0x41,0x41,0x41,0x41,0x4D,0x53,0x32,0x1C,0x60,0x00},/*"Q",49*/
+{0x00,0x00,0x00,0x3F,0x42,0x42,0x42,0x3E,0x12,0x12,0x22,0x22,0x42,0xC7,0x00,0x00},/*"R",50*/
+{0x00,0x00,0x00,0x7C,0x42,0x42,0x02,0x04,0x18,0x20,0x40,0x42,0x42,0x3E,0x00,0x00},/*"S",51*/
+{0x00,0x00,0x00,0x7F,0x49,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x1C,0x00,0x00},/*"T",52*/
+{0x00,0x00,0x00,0xE7,0x42,0x42,0x42,0x42,0x42,0x42,0x42,0x42,0x42,0x3C,0x00,0x00},/*"U",53*/
+{0x00,0x00,0x00,0xE7,0x42,0x42,0x22,0x24,0x24,0x14,0x14,0x18,0x08,0x08,0x00,0x00},/*"V",54*/
+{0x00,0x00,0x00,0x6B,0x49,0x49,0x49,0x49,0x55,0x55,0x36,0x22,0x22,0x22,0x00,0x00},/*"W",55*/
+{0x00,0x00,0x00,0xE7,0x42,0x24,0x24,0x18,0x18,0x18,0x24,0x24,0x42,0xE7,0x00,0x00},/*"X",56*/
+{0x00,0x00,0x00,0x77,0x22,0x22,0x14,0x14,0x08,0x08,0x08,0x08,0x08,0x1C,0x00,0x00},/*"Y",57*/
+{0x00,0x00,0x00,0x7E,0x21,0x20,0x10,0x10,0x08,0x04,0x04,0x42,0x42,0x3F,0x00,0x00},/*"Z",58*/
+{0x00,0x78,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x78,0x00},/*"[",59*/
+{0x00,0x00,0x02,0x02,0x04,0x04,0x08,0x08,0x08,0x10,0x10,0x20,0x20,0x20,0x40,0x40},/*"\",60*/
+{0x00,0x1E,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x1E,0x00},/*"]",61*/
+{0x00,0x38,0x44,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},/*"^",62*/
+{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFF},/*"_",63*/
+{0x00,0x06,0x08,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},/*"`",64*/
+{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x3C,0x42,0x78,0x44,0x42,0x42,0xFC,0x00,0x00},/*"a",65*/
+{0x00,0x00,0x00,0x03,0x02,0x02,0x02,0x1A,0x26,0x42,0x42,0x42,0x26,0x1A,0x00,0x00},/*"b",66*/
+{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x38,0x44,0x02,0x02,0x02,0x44,0x38,0x00,0x00},/*"c",67*/
+{0x00,0x00,0x00,0x60,0x40,0x40,0x40,0x78,0x44,0x42,0x42,0x42,0x64,0xD8,0x00,0x00},/*"d",68*/
+{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x3C,0x42,0x7E,0x02,0x02,0x42,0x3C,0x00,0x00},/*"e",69*/
+{0x00,0x00,0x00,0xF0,0x88,0x08,0x08,0x7E,0x08,0x08,0x08,0x08,0x08,0x3E,0x00,0x00},/*"f",70*/
+{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x7C,0x22,0x22,0x1C,0x02,0x3C,0x42,0x42,0x3C},/*"g",71*/
+{0x00,0x00,0x00,0x03,0x02,0x02,0x02,0x3A,0x46,0x42,0x42,0x42,0x42,0xE7,0x00,0x00},/*"h",72*/
+{0x00,0x00,0x00,0x0C,0x0C,0x00,0x00,0x0E,0x08,0x08,0x08,0x08,0x08,0x3E,0x00,0x00},/*"i",73*/
+{0x00,0x00,0x00,0x30,0x30,0x00,0x00,0x38,0x20,0x20,0x20,0x20,0x20,0x20,0x22,0x1E},/*"j",74*/
+{0x00,0x00,0x00,0x03,0x02,0x02,0x02,0x72,0x12,0x0A,0x16,0x12,0x22,0x77,0x00,0x00},/*"k",75*/
+{0x00,0x00,0x00,0x0E,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x3E,0x00,0x00},/*"l",76*/
+{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x7F,0x92,0x92,0x92,0x92,0x92,0xB7,0x00,0x00},/*"m",77*/
+{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x3B,0x46,0x42,0x42,0x42,0x42,0xE7,0x00,0x00},/*"n",78*/
+{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x3C,0x42,0x42,0x42,0x42,0x42,0x3C,0x00,0x00},/*"o",79*/
+{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x1B,0x26,0x42,0x42,0x42,0x22,0x1E,0x02,0x07},/*"p",80*/
+{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x78,0x44,0x42,0x42,0x42,0x44,0x78,0x40,0xE0},/*"q",81*/
+{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x77,0x4C,0x04,0x04,0x04,0x04,0x1F,0x00,0x00},/*"r",82*/
+{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x7C,0x42,0x02,0x3C,0x40,0x42,0x3E,0x00,0x00},/*"s",83*/
+{0x00,0x00,0x00,0x00,0x00,0x08,0x08,0x3E,0x08,0x08,0x08,0x08,0x08,0x30,0x00,0x00},/*"t",84*/
+{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x63,0x42,0x42,0x42,0x42,0x62,0xDC,0x00,0x00},/*"u",85*/
+{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xE7,0x42,0x24,0x24,0x14,0x08,0x08,0x00,0x00},/*"v",86*/
+{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xEB,0x49,0x49,0x55,0x55,0x22,0x22,0x00,0x00},/*"w",87*/
+{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x76,0x24,0x18,0x18,0x18,0x24,0x6E,0x00,0x00},/*"x",88*/
+{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xE7,0x42,0x24,0x24,0x14,0x18,0x08,0x08,0x07},/*"y",89*/
+{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x7E,0x22,0x10,0x08,0x08,0x44,0x7E,0x00,0x00},/*"z",90*/
+{0x00,0xC0,0x20,0x20,0x20,0x20,0x20,0x10,0x20,0x20,0x20,0x20,0x20,0x20,0xC0,0x00},/*"{",91*/
+{0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10},/*"|",92*/
+{0x00,0x06,0x08,0x08,0x08,0x08,0x08,0x10,0x08,0x08,0x08,0x08,0x08,0x08,0x06,0x00},/*"}",93*/
+{0x0C,0x32,0xC2,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},/*"~",94*/
+}; 
+typedef struct 
+{
+       unsigned char Index[2];	
+       char Msk[32];
+}typFNT_GB16; 
+//字体取模：宋体常规小四
+const typFNT_GB16 tfont16[]=   
+{
+"深",0x00,0x00,0x27,0xFC,0x14,0x04,0x14,0xA4,0x81,0x10,0x42,0x08,0x40,0x40,0x10,0x40,
+0x17,0xFC,0x20,0x40,0xE0,0xE0,0x21,0x50,0x22,0x48,0x2C,0x46,0x20,0x40,0x00,0x40,/*0*/
+"圳",0x11,0x04,0x11,0x24,0x11,0x24,0x11,0x24,0x11,0x24,0xFD,0x24,0x11,0x24,0x11,0x24,
+0x11,0x24,0x11,0x24,0x11,0x24,0x1D,0x24,0xE1,0x24,0x42,0x24,0x02,0x04,0x04,0x04,/*1*/
+"市",0x02,0x00,0x01,0x00,0x00,0x00,0x7F,0xFC,0x01,0x00,0x01,0x00,0x01,0x00,0x3F,0xF8,
+0x21,0x08,0x21,0x08,0x21,0x08,0x21,0x08,0x21,0x28,0x21,0x10,0x01,0x00,0x01,0x00,/*2*/
+"全",0x00,0x00,0x00,0x00,0x01,0x80,0x02,0x40,0x04,0x30,0x18,0x08,0x60,0x06,0x1F,0xF9,
+0x01,0x00,0x01,0x00,0x01,0x00,0x3F,0xF8,0x01,0x00,0x01,0x00,0x01,0x00,0x7F,0xFE,/*0*/
+"动",0x00,0x00,0x00,0x00,0x00,0x20,0x3E,0x20,0x00,0x7C,0x00,0x22,0x00,0x22,0x7F,0x22,
+0x10,0x22,0x10,0x22,0x12,0x22,0x12,0x22,0x22,0x42,0x23,0x42,0x3D,0x82,0x00,0x9C,/*1*/
+"电",0x00,0x00,0x01,0x00,0x01,0x00,0x1F,0xF0,0x61,0x0C,0x41,0x04,0x41,0x04,0x7F,0xFC,
+0x41,0x04,0x41,0x04,0x41,0x04,0x7F,0xFC,0x01,0x00,0x01,0x02,0x01,0x02,0x01,0xFC,/*2*/
+"子",0x00,0x00,0x00,0x00,0x3F,0xF8,0x00,0x10,0x00,0x60,0x00,0x80,0x01,0x00,0x00,0x80,
+0x7F,0xFE,0x00,0x40,0x00,0x40,0x00,0x20,0x00,0x20,0x00,0x20,0x18,0x40,0x07,0x80,/*3*/
+"技",0x10,0x20,0x10,0x20,0x10,0x20,0x13,0xFE,0xFC,0x20,0x10,0x20,0x10,0x20,0x15,0xFC,0x18,0x84,0x30,0x88,0xD0,0x48,0x10,0x50,0x10,0x20,0x10,0x50,0x51,0x88,0x26,0x06,
+"术",0x01,0x00,0x01,0x20,0x01,0x10,0x01,0x10,0x7F,0xFC,0x03,0x80,0x05,0x40,0x05,0x40,0x09,0x20,0x11,0x10,0x21,0x08,0x41,0x04,0x81,0x02,0x01,0x00,0x01,0x00,0x01,0x00,
+"有",0x02,0x00,0x02,0x00,0xFF,0xFE,0x04,0x00,0x04,0x00,0x0F,0xF0,0x08,0x10,0x18,0x10,0x2F,0xF0,0x48,0x10,0x88,0x10,0x0F,0xF0,0x08,0x10,0x08,0x10,0x08,0x50,0x08,0x20,
+"限",0x00,0x00,0x7B,0xF8,0x4A,0x08,0x52,0x08,0x53,0xF8,0x62,0x08,0x52,0x08,0x4B,0xF8,0x4A,0x44,0x4A,0x48,0x6A,0x30,0x52,0x20,0x42,0x10,0x42,0x88,0x43,0x06,0x42,0x00,
+"公",0x00,0x80,0x04,0x80,0x04,0x80,0x08,0x40,0x08,0x40,0x10,0x20,0x20,0x10,0x42,0x08,0x82,0x06,0x04,0x00,0x04,0x40,0x08,0x20,0x10,0x20,0x3F,0xF0,0x10,0x10,0x00,0x00,
+"司",0x00,0x00,0x3F,0xF8,0x00,0x08,0x00,0x08,0x7F,0xE8,0x00,0x08,0x00,0x08,0x1F,0x88,0x10,0x88,0x10,0x88,0x10,0x88,0x10,0x88,0x1F,0x88,0x10,0x88,0x00,0x28,0x00,0x10,
+"欢",0x00,0x80,0x00,0x80,0xFC,0x80,0x04,0xFC,0x05,0x04,0x49,0x08,0x2A,0x40,0x14,0x40,0x10,0x40,0x28,0xA0,0x24,0xA0,0x45,0x10,0x81,0x10,0x02,0x08,0x04,0x04,0x08,0x02,
+"迎",0x00,0x00,0x20,0x80,0x13,0x3C,0x12,0x24,0x02,0x24,0x02,0x24,0xF2,0x24,0x12,0x24,0x12,0x24,0x12,0xB4,0x13,0x28,0x12,0x20,0x10,0x20,0x28,0x20,0x47,0xFE,0x00,0x00,
+"您",0x09,0x00,0x09,0x00,0x11,0xFC,0x32,0x04,0x54,0x48,0x99,0x50,0x11,0x48,0x12,0x44,0x14,0x44,0x11,0x40,0x10,0x80,0x02,0x00,0x51,0x04,0x51,0x12,0x90,0x12,0x0F,0xF0,
+"纯",0x00,0x00,0x00,0x20,0x10,0x20,0x13,0xFE,0x20,0x20,0x26,0x24,0x4A,0x24,0x7A,0x24,
+0x12,0x24,0x22,0x24,0x23,0xFC,0x7C,0x20,0x00,0x22,0x04,0x22,0x78,0x22,0x00,0x3C,/*0*/
+"色",0x00,0x00,0x00,0x00,0x04,0x00,0x0F,0xF0,0x10,0x20,0x20,0x20,0x7F,0xFC,0x20,0x84,
+0x20,0x84,0x20,0x84,0x20,0x84,0x3F,0xF8,0x20,0x00,0x20,0x02,0x20,0x02,0x1F,0xFE,/*1*/
+"填",0x00,0x00,0x00,0x00,0x20,0x40,0x23,0xFE,0x20,0x40,0x79,0xFC,0x22,0x04,0x23,0xFC,
+0x22,0x04,0x23,0xFC,0x22,0x04,0x23,0xFC,0x3A,0x04,0x65,0xFA,0x01,0x98,0x02,0x04,/*2*/
+"充",0x00,0x00,0x01,0x00,0x01,0x00,0x7F,0xFE,0x02,0x20,0x04,0x10,0x04,0x08,0x08,0x04,
+0x3F,0xFC,0x04,0x42,0x04,0x40,0x04,0x40,0x04,0x42,0x08,0x42,0x10,0x42,0x60,0x7E,/*3*/
+"矩",0x00,0x00,0x00,0x00,0x20,0x7E,0x3E,0x80,0x48,0x80,0x48,0x80,0x48,0xFE,0x48,0x82,
+0x7F,0x82,0x08,0x82,0x0C,0x82,0x14,0xFA,0x12,0x84,0x22,0x80,0x21,0x80,0x40,0xFE,/*6*/
+"形",0x00,0x00,0x00,0x00,0x7F,0x84,0x22,0x08,0x22,0x30,0x22,0xC0,0x22,0x02,0x22,0x04,
+0x7F,0xC8,0x22,0x30,0x22,0xC2,0x22,0x02,0x22,0x04,0x22,0x08,0x22,0x30,0x40,0x40,/*7*/
+"画",0x00,0x00,0x00,0x00,0x7F,0xFE,0x00,0x00,0x0F,0xF0,0x11,0x10,0x11,0x10,0x11,0x10,
+0x51,0x12,0x5F,0xF2,0x51,0x12,0x51,0x12,0x51,0x12,0x4F,0xF2,0x40,0x02,0x7F,0xFC,/*8*/
+"圆",0x00,0x00,0x00,0x00,0x7F,0xFE,0x47,0xE2,0x48,0x12,0x48,0x12,0x47,0xE2,0x4F,0xF2,
+0x50,0x12,0x50,0x12,0x51,0x12,0x51,0x12,0x42,0x92,0x44,0x72,0x58,0x0A,0x3F,0xFC,/*9*/
+"图",0x00,0x00,0x00,0x00,0x3F,0xFE,0x44,0x02,0x47,0xF2,0x4C,0x22,0x53,0x62,0x40,0x82,
+0x43,0x62,0x5E,0x1A,0x41,0x82,0x40,0x62,0x43,0x02,0x40,0xC2,0x40,0x22,0x3F,0xFC,/*0*/
+"片",0x00,0x00,0x00,0x40,0x20,0x40,0x20,0x40,0x20,0x40,0x3F,0xFE,0x20,0x00,0x20,0x00,
+0x20,0x00,0x3F,0xE0,0x20,0x10,0x20,0x10,0x20,0x10,0x20,0x10,0x40,0x10,0x40,0x10,/*1*/
+"显",0x00,0x00,0x00,0x00,0x3F,0xFC,0x20,0x04,0x20,0x04,0x3F,0xFC,0x20,0x04,0x20,0x04,
+0x1F,0xF8,0x24,0x44,0x14,0x48,0x14,0x48,0x14,0x48,0x0C,0x50,0x04,0x40,0x7F,0xFE,/*2*/
+"示",0x00,0x00,0x00,0x00,0x3F,0xFC,0x00,0x00,0x00,0x00,0x00,0x00,0x7F,0xFE,0x00,0x80,
+0x08,0x90,0x08,0x88,0x10,0x88,0x10,0x84,0x20,0x84,0x20,0x82,0x40,0x82,0x07,0x80,/*3*/
+"菜",0x00,0x00,0x00,0x20,0x08,0x20,0x7F,0xFE,0x00,0x20,0x00,0x78,0x3F,0x88,0x11,0x08,
+0x08,0x90,0x09,0x20,0x7F,0xFE,0x01,0x80,0x03,0x40,0x0D,0x30,0x31,0x0C,0x40,0x02,/*4*/
+"单",0x00,0x00,0x00,0x10,0x08,0x10,0x04,0x20,0x3F,0xF8,0x21,0x04,0x21,0x04,0x3F,0xFC,
+0x21,0x04,0x21,0x04,0x3F,0xF8,0x01,0x00,0x7F,0xFE,0x01,0x00,0x01,0x00,0x01,0x00,/*5*/
+"中",0x00,0x00,0x01,0x00,0x01,0x00,0x01,0x00,0x3F,0xFC,0x21,0x04,0x21,0x04,0x21,0x04,
+0x21,0x04,0x21,0x04,0x21,0x04,0x3F,0xFC,0x01,0x00,0x01,0x00,0x01,0x00,0x01,0x00,/*0*/
+"英",0x00,0x00,0x00,0x00,0x08,0x20,0x7F,0xFE,0x08,0x20,0x09,0x20,0x01,0x00,0x3F,0xF8,
+0x21,0x08,0x21,0x08,0x21,0x08,0x1F,0xF4,0x01,0x40,0x02,0x20,0x0C,0x10,0x70,0x0E,/*1*/
+"文",0x00,0x00,0x01,0x00,0x01,0x00,0x00,0x80,0x3F,0x7C,0x08,0x10,0x08,0x10,0x04,0x10,
+0x04,0x20,0x02,0x20,0x02,0x40,0x01,0x80,0x01,0x80,0x02,0x60,0x1C,0x18,0xE0,0x06,/*2*/
+"综",0x00,0x00,0x00,0x00,0x10,0x20,0x11,0xFE,0x22,0x02,0x22,0x02,0x49,0xFC,0x58,0x00,
+0x30,0x00,0x13,0xFE,0x25,0x28,0x79,0x24,0x01,0x24,0x0D,0x24,0x72,0x22,0x02,0xA2,/*4*/
+"合",0x00,0x00,0x00,0x00,0x01,0x80,0x02,0x40,0x04,0x30,0x18,0x08,0x60,0x06,0x1F,0xF8,
+0x00,0x00,0x1F,0xF8,0x20,0x04,0x20,0x04,0x20,0x04,0x20,0x04,0x20,0x04,0x1F,0xF8,/*5*/
+"亮",0x00,0x00,0x01,0x00,0x01,0x00,0x7F,0xFE,0x00,0x00,0x3F,0xF8,0x20,0x08,0x3F,0xF8,
+0x3F,0xF8,0x40,0x06,0x47,0xC2,0x48,0x24,0x08,0x20,0x08,0x22,0x10,0x22,0x60,0x3E,/*0*/
+"度",0x00,0x00,0x00,0x00,0x00,0x80,0x3F,0xFE,0x44,0x10,0x5F,0xFC,0x44,0x10,0x44,0x10,
+0x43,0xF0,0x40,0x00,0x5F,0xF8,0x44,0x08,0x42,0x30,0x41,0xC0,0x43,0x60,0xBC,0x1E,/*1*/
+"测",0x00,0x00,0x00,0x00,0x67,0xC2,0x14,0x52,0x05,0x52,0x05,0x52,0xC5,0x52,0x25,0x52,
+0x05,0x52,0x05,0x52,0x15,0x52,0x17,0x52,0x22,0x82,0x22,0x42,0x44,0x42,0x48,0x3E,/*2*/
+"试",0x00,0x00,0x00,0x00,0x20,0x14,0x10,0x14,0x17,0xFE,0x00,0x12,0x00,0x10,0x60,0x10,
+0x13,0xF0,0x10,0x90,0x10,0x90,0x10,0x90,0x14,0x92,0x14,0xEA,0x1F,0x0A,0x00,0x06,/*3*/
+"程",0x00,0x00,0x00,0x00,0x19,0xFE,0x72,0x02,0x12,0x02,0x12,0x02,0x7D,0xFC,0x18,0x00,
+0x1B,0xFE,0x34,0x20,0x50,0x20,0x53,0xFE,0x10,0x20,0x10,0x20,0x10,0x20,0x13,0xFE,/*8*/
+"序",0x00,0x00,0x00,0x00,0x00,0x80,0x3F,0xFE,0x40,0x00,0x47,0xFC,0x42,0x08,0x41,0x30,
+0x40,0xC0,0x5F,0xFE,0x40,0x42,0x40,0x42,0x40,0x44,0x40,0x48,0x40,0x40,0x44,0x40,/*9*/
+"调",0x00,0x00,0x00,0x00,0x23,0xFE,0x12,0x22,0x02,0xFA,0x02,0x22,0xE2,0x22,0x12,0xFE,
+0x12,0x72,0x12,0x8A,0x12,0x8A,0x12,0x8A,0x16,0xBA,0x1A,0x42,0x12,0x02,0x04,0x0E,/*0*/
+"光",0x00,0x00,0x01,0x00,0x01,0x04,0x11,0x08,0x09,0x08,0x09,0x10,0x09,0x20,0x7F,0xFE,
+0x04,0x40,0x04,0x40,0x04,0x40,0x04,0x40,0x08,0x42,0x08,0x42,0x10,0x42,0x60,0x7C,/*1*/
+"版",0x00,0x00,0x00,0x00,0x48,0xFE,0x49,0x00,0x49,0x00,0x49,0x00,0x7E,0xFE,0x41,0x82,
+0x41,0x44,0x79,0x44,0x45,0x28,0x45,0x28,0x45,0x10,0x45,0x28,0x46,0x44,0x03,0x82,/*10*/
+"权",0x00,0x00,0x10,0x00,0x10,0x00,0x13,0xFC,0x7D,0x04,0x11,0x04,0x19,0x04,0x18,0x84,
+0x34,0x88,0x50,0x48,0x50,0x50,0x10,0x20,0x10,0x50,0x10,0x88,0x13,0x04,0x14,0x02,/*11*/
+"所",0x00,0x00,0x00,0x00,0x3F,0x7C,0x20,0x40,0x20,0x40,0x3E,0x40,0x22,0x7E,0x22,0x44,
+0x22,0x44,0x22,0x44,0x3E,0x84,0x20,0x84,0x20,0x84,0x40,0x84,0x41,0x04,0x42,0x04,/*12*/
+"屏",0x00,0x00,0x3F,0xF8,0x20,0x08,0x20,0x08,0x3F,0xF8,0x24,0x10,0x22,0x20,0x2F,0xF8,
+0x22,0x20,0x22,0x20,0x3F,0xFC,0x22,0x20,0x42,0x20,0x44,0x20,0x84,0x20,0x08,0x20,/*"?",0*/
+"幕",0x04,0x40,0x7F,0xFC,0x04,0x40,0x1F,0xF0,0x10,0x10,0x1F,0xF0,0x10,0x10,0x1F,0xF0,
+0x04,0x00,0xFF,0xFE,0x11,0x10,0x3F,0xF8,0xD1,0x16,0x11,0x50,0x11,0x20,0x01,0x00,/*"?",1*/
+"旋",0x20,0x80,0x10,0x80,0x10,0xFE,0x01,0x00,0xFE,0x00,0x21,0xFC,0x20,0x24,0x3C,0x24,
+0x24,0xA0,0x24,0xA0,0x24,0xBC,0x24,0xA0,0x24,0xA0,0x45,0x60,0x55,0x3E,0x8A,0x00,/*"?",2*/
+"转",0x20,0x20,0x20,0x20,0x20,0x20,0xFD,0xFC,0x40,0x20,0x50,0x40,0x93,0xFE,0xFC,0x40,
+0x10,0x80,0x11,0xFC,0x1C,0x04,0xF0,0x88,0x50,0x50,0x10,0x20,0x10,0x10,0x10,0x10,/*"?",3*/
+"开",0x00,0x00,0x7F,0xFC,0x08,0x20,0x08,0x20,0x08,0x20,0x08,0x20,0x08,0x20,0xFF,0xFE,
+0x08,0x20,0x08,0x20,0x08,0x20,0x08,0x20,0x10,0x20,0x10,0x20,0x20,0x20,0x40,0x20,/*"?",0*/
+"源",0x00,0x00,0x27,0xFE,0x14,0x20,0x14,0x40,0x85,0xFC,0x45,0x04,0x45,0xFC,0x15,0x04,
+0x15,0xFC,0x25,0x24,0xE4,0x20,0x24,0xA8,0x29,0x24,0x2A,0x22,0x30,0xA0,0x00,0x40,/*"?",1*/
+"液",0x00,0x80,0x20,0x40,0x17,0xFE,0x11,0x20,0x81,0x20,0x42,0x3C,0x42,0x44,0x16,0x64,
+0x12,0x94,0x23,0x48,0xE2,0x48,0x22,0x30,0x22,0x20,0x22,0x50,0x22,0x88,0x03,0x06,/*"?",2*/
+"晶",0x0F,0xE0,0x08,0x20,0x08,0x20,0x0F,0xE0,0x08,0x20,0x08,0x20,0x0F,0xE0,0x00,0x00,
+0x7E,0xFC,0x42,0x84,0x42,0x84,0x7E,0xFC,0x42,0x84,0x42,0x84,0x7E,0xFC,0x42,0x84,/*"?",3*/
+"网",0x00,0x00,0x7F,0xFC,0x40,0x04,0x40,0x04,0x42,0x14,0x52,0x94,0x4A,0x54,0x44,0x24,
+0x44,0x24,0x4A,0x54,0x4A,0x54,0x52,0x94,0x61,0x04,0x40,0x04,0x40,0x14,0x40,0x08,/*"?",4*/
+"站",0x10,0x20,0x08,0x20,0x08,0x20,0x7E,0x20,0x00,0x3E,0x04,0x20,0x44,0x20,0x44,0x20,
+0x25,0xFC,0x29,0x04,0x29,0x04,0x0F,0x04,0xF1,0x04,0x41,0x04,0x01,0xFC,0x01,0x04,/*"?",5*/
+"按",0x10,0x40,0x10,0x20,0x10,0x20,0x13,0xFE,0xFA,0x02,0x14,0x44,0x10,0x40,0x1B,0xFE,
+0x30,0x88,0xD0,0x88,0x11,0x08,0x10,0xD0,0x10,0x20,0x10,0x50,0x50,0x88,0x23,0x04,/*"?",6*/
+"键",0x20,0x10,0x20,0x10,0x3B,0x7C,0x21,0x14,0x41,0xFE,0x7A,0x14,0xA2,0x7C,0x27,0x10,
+0xF9,0x7C,0x25,0x10,0x25,0xFE,0x22,0x10,0x2A,0x10,0x35,0x00,0x28,0xFE,0x00,0x00,/*"?",0*/
+"校",0x10,0x40,0x10,0x20,0x10,0x20,0x11,0xFE,0xFC,0x00,0x10,0x88,0x31,0x04,0x3A,0x02,
+0x54,0x88,0x50,0x88,0x90,0x50,0x10,0x50,0x10,0x20,0x10,0x50,0x10,0x88,0x13,0x06,/*"?",7*/
+"准",0x01,0x40,0x41,0x20,0x21,0x20,0x23,0xFE,0x02,0x20,0x16,0x20,0x1B,0xFC,0x12,0x20,
+0x22,0x20,0x23,0xFC,0xE2,0x20,0x22,0x20,0x22,0x20,0x23,0xFE,0x22,0x00,0x02,0x00,/*"?",8*/
+"触",0x20,0x20,0x20,0x20,0x78,0x20,0x49,0xFC,0x91,0x24,0x7D,0x24,0x55,0x24,0x55,0x24,
+0x7D,0xFC,0x55,0x24,0x54,0x20,0x7C,0x28,0x54,0x24,0x57,0xFE,0x45,0x02,0x8C,0x00,/*"?",9*/
+"摸",0x11,0x10,0x11,0x10,0x17,0xFC,0x11,0x10,0xFC,0x00,0x13,0xF8,0x12,0x08,0x17,0xF8,
+0x1A,0x08,0x33,0xF8,0xD0,0x40,0x17,0xFC,0x10,0xA0,0x11,0x10,0x52,0x08,0x24,0x06,/*"?",10*/
+};
+typedef struct 
+{
+       unsigned char Index[2];	
+       char Msk[72];
+}typFNT_GB24; 
+//字体取模：宋体常规小四
+const typFNT_GB24 tfont24[]=
+{
+"深",0x00,0x00,0x00,0x00,0x00,0x00,0x10,0x00,0x00,0x08,0x00,0x08,0x0C,0x7F,0xFC,0x04,
+0x40,0x10,0x01,0xC8,0xA0,0x02,0x18,0x60,0x42,0x30,0x18,0x32,0x23,0x18,0x12,0xC3,
+0x00,0x14,0x03,0x00,0x04,0x03,0x0C,0x04,0x7F,0xF0,0x08,0x0F,0x80,0x08,0x0B,0x40,
+0x78,0x13,0x60,0x18,0x33,0x20,0x18,0x63,0x18,0x18,0x83,0x1C,0x19,0x03,0x08,0x18,
+0x03,0x00,0x00,0x03,0x00,0x00,0x00,0x00,/*0*/
+"圳",0x00,0x00,0x00,0x00,0x00,0x00,0x04,0x10,0x0C,0x04,0x18,0x0C,0x04,0x10,0x8C,0x04,
+0x10,0x8C,0x04,0x10,0x8C,0x04,0x10,0x8C,0x04,0xD0,0x8C,0x3F,0x10,0x8C,0x04,0x10,
+0x8C,0x04,0x10,0x8C,0x04,0x10,0x8C,0x04,0x10,0x8C,0x04,0x10,0x8C,0x04,0x10,0x8C,
+0x05,0xF0,0x8C,0x0E,0x20,0x8C,0x78,0x20,0x8C,0x20,0x40,0x8C,0x00,0x80,0x8C,0x01,
+0x00,0x0C,0x02,0x00,0x0C,0x00,0x00,0x00,/*1*/
+"市",0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x00,0x00,0x18,0x00,0x00,0x18,0x08,0x00,
+0x00,0x1C,0x1F,0xFF,0xE0,0x00,0x18,0x00,0x00,0x18,0x20,0x07,0xFF,0xF0,0x04,0x18,
+0x20,0x04,0x18,0x20,0x04,0x18,0x20,0x04,0x18,0x20,0x04,0x18,0x20,0x04,0x18,0x20,
+0x04,0x18,0x20,0x04,0x18,0x20,0x04,0x18,0x20,0x04,0x18,0xE0,0x04,0x18,0x40,0x00,
+0x18,0x00,0x00,0x18,0x00,0x00,0x00,0x00,/*2*/
+"中",0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x18,0x00,0x00,
+0x18,0x00,0x00,0x18,0x00,0x00,0x18,0x00,0x3F,0xFF,0xFE,0x30,0x18,0x06,0x30,0x18,
+0x06,0x30,0x18,0x06,0x30,0x18,0x06,0x30,0x18,0x06,0x3F,0xFF,0xFE,0x30,0x18,0x06,
+0x00,0x18,0x00,0x00,0x18,0x00,0x00,0x18,0x00,0x00,0x18,0x00,0x00,0x18,0x00,0x00,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,/*0*/
+"文",0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x38,0x00,0x00,0x1C,0x00,0x00,
+0x06,0x00,0xFF,0xFF,0xFF,0x06,0x00,0x30,0x06,0x00,0x30,0x03,0x00,0x60,0x03,0x00,
+0x60,0x01,0x80,0xC0,0x00,0xC1,0x80,0x00,0xE3,0x00,0x00,0x36,0x00,0x00,0x1C,0x00,
+0x00,0x77,0x00,0x03,0xC1,0xE0,0x1E,0x00,0x3C,0x60,0x00,0x07,0x00,0x00,0x00,0x00,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,/*1*/
+"测",0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x40,0x00,0x03,0x21,
+0xFF,0x33,0x39,0x83,0x33,0x11,0x83,0x33,0x01,0x9B,0x33,0xC1,0x9B,0x33,0x71,0x9B,
+0x33,0x19,0x9B,0x33,0x01,0x9B,0x33,0x01,0x9B,0x33,0x11,0x9B,0x33,0x19,0xB3,0x33,
+0x30,0x30,0x33,0x30,0x6C,0x03,0x30,0xC6,0x03,0x63,0x83,0x03,0x2E,0x01,0xBE,0x00,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,/*2*/
+"试",0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x40,0x00,0xD8,0x30,
+0x00,0xCE,0x18,0x00,0xC2,0x1C,0x00,0xC0,0x01,0xFF,0xFF,0x00,0x00,0xC0,0xF8,0x00,
+0xC0,0x18,0x00,0xC0,0x19,0xFF,0xC0,0x18,0x18,0x40,0x18,0x18,0x60,0x19,0x18,0x60,
+0x1B,0x18,0x61,0x1E,0x18,0x31,0x1C,0x1F,0xB1,0x39,0xF0,0x19,0x10,0x00,0x0F,0x00,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,/*3*/
+};  
+typedef struct 
+{
+       unsigned char Index[2];	
+       char Msk[128];
+}typFNT_GB32; 
+//字体取模：宋体常规小四
+const typFNT_GB32 tfont32[]=
+{
+"字",0x00,0x00,0x00,0x00,0x00,0x06,0x00,0x00,0x00,0x03,0x00,0x00,0x00,0x00,0xC0,0x00,
+0x00,0x01,0xC0,0xC0,0x00,0x01,0x07,0xC0,0x00,0x01,0xFF,0x00,0x02,0x1F,0xFE,0x00,
+0x07,0xF0,0x1C,0x00,0x07,0xC0,0x70,0x00,0x0F,0x00,0xE0,0x00,0x0E,0x03,0xF0,0x00,
+0x1C,0x0F,0xF0,0x00,0x3C,0x0F,0x70,0x00,0x3C,0x00,0xE0,0x00,0x18,0x00,0xC0,0x00,
+0x00,0x00,0xC0,0x00,0x00,0x00,0xC0,0x00,0x00,0x00,0x60,0x00,0x00,0x00,0x20,0x00,
+0x00,0x00,0x37,0x00,0x00,0x01,0xFF,0x00,0x00,0x7F,0xF8,0x00,0x07,0xF8,0x30,0x00,
+0x1F,0x80,0x30,0x00,0x00,0x80,0x30,0x00,0x00,0xC0,0x30,0x00,0x00,0x60,0x60,0x00,
+0x00,0x18,0xE0,0x00,0x00,0x0F,0xC0,0x00,0x00,0x06,0x00,0x00,0x00,0x00,0x00,0x00,/*0*/
+"体",0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xC0,0x00,0x00,0x00,0xE0,
+0x00,0x20,0x01,0xB8,0x00,0x70,0x3F,0xF8,0x00,0x61,0xFF,0xC0,0x00,0xC3,0x03,0x00,
+0x01,0xC6,0x06,0x00,0x03,0x8C,0x06,0x00,0x03,0x08,0x0C,0x00,0x06,0x08,0x0C,0x00,
+0x0E,0x18,0x18,0x3F,0x1E,0x10,0x1B,0xF3,0x1F,0x90,0x3F,0x07,0x00,0x80,0x3C,0x1C,
+0x01,0x90,0x70,0x7C,0x01,0x90,0x60,0xFE,0x01,0xA0,0xC3,0xF8,0x01,0xA0,0x0F,0xD8,
+0x03,0xA0,0x08,0x18,0x03,0x60,0x00,0x18,0x03,0x40,0x00,0x18,0x03,0xC0,0x00,0x18,
+0x03,0x80,0x00,0x18,0x03,0x00,0x00,0x18,0x00,0x00,0x00,0x18,0x00,0x00,0x00,0x10,
+0x00,0x00,0x00,0x30,0x00,0x00,0x00,0x30,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,/*1*/
+"测",0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+0x02,0x0C,0x10,0x08,0x07,0x1F,0xF8,0x04,0x03,0xBF,0xF0,0x02,0x01,0xBC,0x30,0x03,
+0x03,0xEC,0x30,0x03,0x01,0x5C,0x60,0x03,0x00,0xD8,0x60,0x03,0x00,0xD8,0x60,0x03,
+0x80,0x98,0x62,0x03,0x61,0xB8,0x43,0x07,0x71,0xB1,0x43,0x06,0x31,0x32,0x43,0x06,
+0x33,0x76,0xC3,0x06,0x3A,0x64,0xC7,0x06,0x3E,0xEC,0xC0,0x06,0x3E,0x78,0xC0,0x06,
+0x3C,0x30,0x40,0x06,0x7C,0x70,0x00,0x06,0x78,0xE0,0x60,0x06,0x7B,0xFF,0xF0,0x06,
+0xF7,0xC0,0x00,0x06,0xE4,0x00,0x00,0x06,0x40,0x00,0x00,0x06,0x00,0x00,0x00,0x06,
+0x00,0x00,0x00,0x7C,0x00,0x00,0x8F,0xF0,0x00,0x00,0x7C,0x00,0x00,0x00,0x00,0x00,/*2*/
+"试",0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x3F,0x00,
+0x00,0x00,0x7F,0x80,0x00,0x00,0x01,0x80,0x00,0x00,0x00,0xC0,0x00,0x00,0x00,0xC0,
+0x00,0x00,0x00,0xCE,0x03,0x80,0x00,0xCF,0xFF,0xC0,0x00,0xDD,0x41,0x80,0x0F,0xFE,
+0x00,0x07,0xFF,0xFC,0x00,0x0C,0x00,0xF0,0x00,0x18,0x0F,0xC0,0x3E,0x19,0xFF,0x40,
+0xF3,0x11,0xBC,0x60,0x83,0x30,0x7F,0xE0,0x03,0xB1,0xFE,0x20,0x03,0x33,0x80,0x20,
+0x03,0x70,0x00,0x30,0x03,0x60,0x00,0x10,0x03,0x60,0x00,0x18,0x07,0xC0,0x00,0x0C,
+0x07,0xC0,0x00,0x04,0x07,0x80,0x00,0x02,0x01,0x00,0x00,0x03,0x00,0x00,0x00,0x01,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,/*3*/
+};
+  
+#endif
diff --git a/FinalHomework/Core/Inc/GUI.h b/FinalHomework/Core/Inc/GUI.h
new file mode 100644
index 0000000..a8c5b71
--- /dev/null
+++ b/FinalHomework/Core/Inc/GUI.h
@@ -0,0 +1,51 @@
+/****************************************************************************************************
+//=========================================电源接线================================================//
+//     LCD模块                STM32单片机
+//      VCC          接        DC5V/3.3V      //电源
+//      GND          接          GND          //电源地
+//=======================================液晶屏数据线接线==========================================//
+//本模块默认数据总线类型为SPI总线
+//     LCD模块                STM32单片机    
+//       SDA         接          PB15         //液晶屏SPI总线数据写信号
+//=======================================液晶屏控制线接线==========================================//
+//     LCD模块 					      STM32单片机 
+//       SCK         接          PB13         //液晶屏SPI总线时钟信号
+//       A0          接          PB10         //液晶屏数据/命令控制信号
+//       RESET       接          PB12         //液晶屏复位控制信号
+//       CS          接          PB11         //液晶屏片选控制信号
+**************************************************************************************************/	
+ /* @attention
+  *
+  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+  * TIME. AS A RESULT, QD electronic SHALL NOT BE HELD LIABLE FOR ANY
+  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+**************************************************************************************************/		
+#ifndef __GUI_H__
+#define __GUI_H__
+
+#include "main.h"
+
+void GUI_DrawPoint(uint16_t x,uint16_t y,uint16_t color);
+void LCD_Fill(uint16_t sx,uint16_t sy,uint16_t ex,uint16_t ey,uint16_t color);
+void LCD_DrawLine(uint16_t x1, uint16_t y1, uint16_t x2, uint16_t y2);
+void LCD_DrawRectangle(uint16_t x1, uint16_t y1, uint16_t x2, uint16_t y2);
+void Draw_Circle(uint16_t x0,uint16_t y0,uint16_t fc,uint8_t r);
+void Draw_Triangel(uint16_t x0,uint16_t y0,uint16_t x1,uint16_t y1,uint16_t x2,uint16_t y2);
+void Fill_Triangel(uint16_t x0,uint16_t y0,uint16_t x1,uint16_t y1,uint16_t x2,uint16_t y2);
+void LCD_ShowChar(uint16_t x,uint16_t y,uint16_t fc, uint16_t bc, uint8_t num,uint8_t size,uint8_t mode);
+void LCD_ShowNum(uint16_t x,uint16_t y,uint32_t num,uint8_t len,uint8_t size);
+void LCD_Show2Num(uint16_t x,uint16_t y,uint16_t num,uint8_t len,uint8_t size,uint8_t mode);
+void LCD_ShowString(uint16_t x,uint16_t y,uint8_t size,uint8_t *p,uint8_t mode);
+void GUI_DrawFont16(uint16_t x, uint16_t y, uint16_t fc, uint16_t bc, uint8_t *s,uint8_t mode);
+void GUI_DrawFont24(uint16_t x, uint16_t y, uint16_t fc, uint16_t bc, uint8_t *s,uint8_t mode);
+void GUI_DrawFont32(uint16_t x, uint16_t y, uint16_t fc, uint16_t bc, uint8_t *s,uint8_t mode);
+void Show_Str(uint16_t x, uint16_t y, uint16_t fc, uint16_t bc, uint8_t *str,uint8_t size,uint8_t mode);
+void Gui_Drawbmp16(uint16_t x,uint16_t y,const unsigned char *p); //显示40*40 QQ图片
+void gui_circle(int xc, int yc,uint16_t c,int r, int fill);
+void Gui_StrCenter(uint16_t x, uint16_t y, uint16_t fc, uint16_t bc, uint8_t *str,uint8_t size,uint8_t mode);
+void LCD_DrawFillRectangle(uint16_t x1, uint16_t y1, uint16_t x2, uint16_t y2);
+#endif
+
diff --git a/FinalHomework/Core/Inc/lcd.h b/FinalHomework/Core/Inc/lcd.h
new file mode 100644
index 0000000..0c7e51b
--- /dev/null
+++ b/FinalHomework/Core/Inc/lcd.h
@@ -0,0 +1,130 @@
+/****************************************************************************************************
+//=========================================电源接线================================================//
+//     LCD模块                STM32单片机
+//      VCC          接        DC5V/3.3V      //电源
+//      GND          接          GND          //电源地
+//=======================================液晶屏数据线接线==========================================//
+//本模块默认数据总线类型为SPI总线
+//     LCD模块                STM32单片机    
+//       SDA         接          PB15         //液晶屏SPI总线数据写信号
+//=======================================液晶屏控制线接线==========================================//
+//     LCD模块 					      STM32单片机 
+//       SCK         接          PB13         //液晶屏SPI总线时钟信号
+//       A0          接          PB10         //液晶屏数据/命令控制信号
+//       RESET       接          PB12         //液晶屏复位控制信号
+//       CS          接          PB11         //液晶屏片选控制信号
+**************************************************************************************************/	
+ /* @attention
+  *
+  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+  * TIME. AS A RESULT, QD electronic SHALL NOT BE HELD LIABLE FOR ANY
+  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+**************************************************************************************************/	
+#ifndef __LCD_H
+#define __LCD_H		
+#include "main.h"
+#include "stdlib.h"
+
+//LCD重要参数集
+typedef struct  
+{										    
+	uint16_t width;				//LCD 宽度
+	uint16_t height;			//LCD 高度
+	uint16_t id;				  //LCD ID
+	uint8_t  dir;			  	//横屏还是竖屏控制：0，竖屏；1，横屏。	
+	uint16_t	 wramcmd;		//开始写gram指令
+	uint16_t  setxcmd;			//设置x坐标指令
+	uint16_t  setycmd;			//设置y坐标指令	 
+}_lcd_dev; 	
+
+//LCD参数
+extern _lcd_dev lcddev;	//管理LCD重要参数
+/////////////////////////////////////用户配置区///////////////////////////////////	 
+#define USE_HORIZONTAL  	 0 //定义液晶屏顺时针旋转方向 	0-0度旋转，1-90度旋转，2-180度旋转，3-270度旋转
+
+//////////////////////////////////////////////////////////////////////////////////	  
+//定义LCD的尺寸
+#define LCD_W 128
+#define LCD_H 160
+
+//TFTLCD部分外要调用的函数		   
+extern uint16_t  POINT_COLOR;//默认红色    
+extern uint16_t  BACK_COLOR; //背景颜色.默认为白色
+
+////////////////////////////////////////////////////////////////////
+//-----------------LCD端口定义---------------- 
+
+
+//GPIO置位（拉高）
+#define	LCD_CS_SET  LCD_CS_GPIO_Port->BSRR=LCD_CS_Pin    //片选端口  	PB12
+#define	LCD_RS_SET	LCD_RS_GPIO_Port->BSRR=LCD_RS_Pin    //数据/命令  	PB14	  
+#define	LCD_RST_SET	LCD_RST_GPIO_Port->BSRR=LCD_RST_Pin   //复位	 	PB11
+
+//GPIO复位（拉低）							    
+#define	LCD_CS_CLR  LCD_CS_GPIO_Port->BRR=LCD_CS_Pin     //片选端口  	PB12
+#define	LCD_RS_CLR	LCD_RS_GPIO_Port->BRR=LCD_RS_Pin     //数据/命令  	PB13	 
+#define	LCD_RST_CLR	LCD_RST_GPIO_Port->BRR=LCD_RST_Pin    //复位		PB11
+
+//画笔颜色
+#define WHITE       		0xFFFF
+#define BLACK      			0x0000	  
+#define BLUE       			0x001F  
+#define BRED        		0XF81F
+#define GRED 				0XFFE0
+#define GBLUE			 	0X07FF
+#define RED         		0xF800
+#define MAGENTA     		0xF81F
+#define GREEN       		0x07E0
+#define CYAN        		0x7FFF
+#define YELLOW      		0xFFE0
+#define BROWN 			0XBC40 //棕色
+#define BRRED 			0XFC07 //棕红色
+#define GRAY  			0X8430 //灰色
+//GUI颜色
+
+#define DARKBLUE      	 0X01CF	//深蓝色
+#define LIGHTBLUE      	 0X7D7C	//浅蓝色  
+#define GRAYBLUE       	 0X5458 //灰蓝色
+//以上三色为PANEL的颜色 
+ 
+#define LIGHTGREEN     	0X841F //浅绿色
+#define LIGHTGRAY     0XEF5B //浅灰色(PANNEL)
+#define LGRAY 			 		0XC618 //浅灰色(PANNEL),窗体背景色
+
+#define LGRAYBLUE      	0XA651 //浅灰蓝色(中间层颜色)
+#define LBBLUE          0X2B12 //浅棕蓝色(选择条目的反色)
+	    															  
+void LCD_Init(void);
+void LCD_DisplayOn(void);
+void LCD_DisplayOff(void);
+void LCD_Clear(uint16_t Color);	 
+void LCD_SetCursor(uint16_t Xpos, uint16_t Ypos);
+void LCD_DrawPoint(uint16_t x,uint16_t y);//画点
+uint16_t  LCD_ReadPoint(uint16_t x,uint16_t y); //读点
+void LCD_DrawLine(uint16_t x1, uint16_t y1, uint16_t x2, uint16_t y2);
+void LCD_DrawRectangle(uint16_t x1, uint16_t y1, uint16_t x2, uint16_t y2);		   
+void LCD_SetWindows(uint16_t xStar, uint16_t yStar,uint16_t xEnd,uint16_t yEnd);
+
+uint16_t LCD_RD_DATA(void);//读取LCD数据									    
+void LCD_WriteReg(uint8_t LCD_Reg, uint16_t LCD_RegValue);
+void LCD_WR_DATA(uint8_t data);
+uint16_t LCD_ReadReg(uint8_t LCD_Reg);
+void LCD_WriteRAM_Prepare(void);
+void LCD_WriteRAM(uint16_t RGB_Code);
+uint16_t LCD_ReadRAM(void);		   
+uint16_t LCD_BGR2RGB(uint16_t c);
+void LCD_SetParam(void);
+void Lcd_WriteData_16Bit(uint16_t Data);
+void LCD_direction(uint8_t direction );
+
+
+				  		 
+#endif  
+	 
+	 
+
+
+
diff --git a/FinalHomework/Core/Inc/pic.h b/FinalHomework/Core/Inc/pic.h
new file mode 100644
index 0000000..8190ee2
--- /dev/null
+++ b/FinalHomework/Core/Inc/pic.h
@@ -0,0 +1,268 @@
+//////////////////////////////////////////////////////////////////////////////////	 
+//本程序只供学习使用，未经作者许可，不得用于其它任何用途
+//测试硬件：单片机STM32F103RCT6,正点原子MiniSTM32开发板,主频72MHZ，晶振12MHZ
+//QDtech-TFT液晶驱动 for STM32 IO模拟
+//xiao冯@ShenZhen QDtech co.,LTD
+//公司网站:www.qdtft.com
+//淘宝网站：http://qdtech.taobao.com
+//wiki技术网站：http://www.lcdwiki.com
+//我司提供技术支持，任何技术问题欢迎随时交流学习
+//固话(传真) :+86 0755-23594567 
+//手机:15989313508（冯工） 
+//邮箱:lcdwiki01@gmail.com    support@lcdwiki.com    goodtft@163.com 
+//技术支持QQ:3002773612  3002778157
+//技术交流QQ群:324828016
+//创建日期:2018/08/22
+//版本：V1.0
+//版权所有，盗版必究。
+//Copyright(C) 深圳市全动电子技术有限公司 2018-2028
+//All rights reserved
+/****************************************************************************************************
+//=========================================电源接线================================================//
+//     LCD模块                STM32单片机
+//      VCC          接        DC5V/3.3V      //电源
+//      GND          接          GND          //电源地
+//=======================================液晶屏数据线接线==========================================//
+//本模块默认数据总线类型为SPI总线
+//     LCD模块                STM32单片机    
+//       SDA         接          PB15         //液晶屏SPI总线数据写信号
+//=======================================液晶屏控制线接线==========================================//
+//     LCD模块 					      STM32单片机 
+//       LED         接          PB9          //液晶屏背光控制信号，如果不需要控制，接5V或3.3V
+//       SCK         接          PB13         //液晶屏SPI总线时钟信号
+//       A0          接          PB10         //液晶屏数据/命令控制信号
+//       RESET       接          PB12         //液晶屏复位控制信号
+//       CS          接          PB11         //液晶屏片选控制信号
+//=========================================触摸屏触接线=========================================//
+//如果模块不带触摸功能或者带有触摸功能，但是不需要触摸功能，则不需要进行触摸屏接线
+//	   LCD模块                STM32单片机 
+//      T_IRQ        接          PC10         //触摸屏触摸中断信号
+//      T_DO         接          PC2          //触摸屏SPI总线读信号
+//      T_DIN        接          PC3          //触摸屏SPI总线写信号
+//      T_CS         接          PC13         //触摸屏片选控制信号
+//      T_CLK        接          PC0          //触摸屏SPI总线时钟信号
+**************************************************************************************************/	
+ /* @attention
+  *
+  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+  * TIME. AS A RESULT, QD electronic SHALL NOT BE HELD LIABLE FOR ANY
+  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+**************************************************************************************************/	
+#ifndef __PIC_H
+#define __PIC_H 
+
+//16位BMP 40X40 QQ图像取模数据
+//Image2LCD取模选项设置
+//水平扫描
+//16位
+//40X40
+//不包含图像头数据
+//自左至右
+//自顶至底
+//低位在前
+const unsigned char gImage_qq[3200] = { /* 0X00,0X10,0X28,0X00,0X28,0X00,0X01,0X1B, */
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XBE,0XF7,
+0XFF,0XFF,0XDE,0XFF,0X38,0XC6,0X92,0X8C,0X8E,0X6B,0X6E,0X6B,0X10,0X7C,0X96,0XAD,
+0X3C,0XE7,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0X5D,0XEF,
+0X15,0X9D,0X4F,0X63,0X6C,0X42,0X0A,0X32,0X88,0X29,0X46,0X19,0X25,0X19,0X45,0X21,
+0XE8,0X31,0X8E,0X6B,0X38,0XC6,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0X36,0XA5,0X10,0X53,
+0X10,0X4B,0X51,0X53,0X0F,0X4B,0X6C,0X3A,0XE9,0X31,0X67,0X21,0X25,0X19,0XE4,0X10,
+0XA3,0X08,0X62,0X00,0X83,0X08,0XCB,0X52,0X9A,0XD6,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0X3C,0XE7,0X70,0X63,0XB3,0X63,0XB8,0X7C,
+0XF5,0X63,0X11,0X43,0X4D,0X32,0XEA,0X29,0X88,0X21,0X26,0X19,0X05,0X19,0X05,0X19,
+0X04,0X11,0X04,0X11,0XE4,0X10,0X83,0X00,0XA3,0X08,0X72,0X8C,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XDB,0XDE,0X4B,0X3A,0XF0,0X42,0X35,0X6C,0X54,0X4B,
+0XB1,0X32,0X2E,0X2A,0XEB,0X21,0XA9,0X21,0X67,0X19,0X05,0X19,0X04,0X11,0X04,0X11,
+0X04,0X11,0X04,0X11,0X04,0X11,0X05,0X19,0XE4,0X10,0X42,0X00,0XAF,0X73,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0X5D,0XEF,0X09,0X32,0X4C,0X32,0X10,0X4B,0X8F,0X32,0X4F,0X2A,
+0X2E,0X2A,0XCC,0X19,0X89,0X19,0X89,0X21,0X47,0X19,0X05,0X19,0X04,0X11,0X04,0X11,
+0XC4,0X10,0XC4,0X10,0X04,0X11,0X04,0X11,0X04,0X11,0XE4,0X10,0X42,0X00,0X31,0X84,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XEC,0X52,0X47,0X19,0X4C,0X32,0X0B,0X2A,0XEC,0X21,0XEC,0X21,
+0X0C,0X22,0X91,0X5B,0XEE,0X4A,0X06,0X11,0X26,0X19,0X04,0X19,0XE4,0X10,0XE4,0X10,
+0XA7,0X29,0X66,0X21,0XA3,0X08,0X05,0X19,0X04,0X11,0X04,0X11,0XE4,0X10,0X82,0X00,
+0XF7,0XBD,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0X35,0XA5,0X83,0X08,0X88,0X21,0X88,0X21,0X89,0X21,0XAA,0X21,0X8A,0X21,
+0X6B,0X42,0X71,0X8C,0XFF,0XFF,0X72,0X8C,0X83,0X08,0X04,0X11,0XC4,0X08,0X29,0X42,
+0XFB,0XDE,0X5D,0XEF,0XEC,0X5A,0X83,0X08,0X04,0X11,0X04,0X11,0X04,0X11,0X83,0X08,
+0XE8,0X31,0XDF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XBE,0XF7,0XC7,0X31,0XC4,0X10,0X25,0X19,0X26,0X19,0X47,0X19,0X47,0X19,0XA8,0X29,
+0X8A,0X52,0X28,0X4A,0X55,0XAD,0XFF,0XFF,0XE8,0X31,0XA3,0X08,0X05,0X19,0X4D,0X6B,
+0X4D,0X6B,0XFF,0XFF,0X7D,0XEF,0X45,0X21,0XC4,0X10,0X04,0X11,0X04,0X11,0X04,0X11,
+0X62,0X00,0X76,0XAD,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0X96,0XB5,0X62,0X00,0X04,0X11,0X04,0X19,0X05,0X11,0X05,0X19,0XC4,0X08,0X8B,0X4A,
+0XB6,0XB5,0X5D,0XEF,0XF7,0XBD,0XFF,0XFF,0X8E,0X6B,0X62,0X00,0X29,0X42,0XAA,0X5A,
+0X08,0X42,0XFF,0XFF,0XFF,0XFF,0XCC,0X52,0X83,0X08,0X04,0X11,0X04,0X11,0X04,0X11,
+0XA3,0X08,0XAD,0X52,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0X1C,0XE7,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0X4E,0X63,0X62,0X00,0X04,0X11,0X04,0X11,0X04,0X11,0XE4,0X10,0X62,0X00,0X8E,0X63,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XCF,0X73,0X01,0X00,0XF3,0X9C,0X2C,0X63,
+0X96,0XB5,0XFF,0XFF,0XFF,0XFF,0X2D,0X5B,0X83,0X00,0X04,0X11,0X04,0X11,0X04,0X11,
+0XE4,0X10,0X67,0X21,0X3D,0XEF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XF8,0XBD,0XB7,0XB5,0X9E,0XEF,0XCB,0X52,0XB3,0X94,0XFF,0XFF,0XFF,0XFF,0XDF,0XFF,
+0XE8,0X31,0XA3,0X08,0X04,0X11,0X04,0X11,0X04,0X11,0X04,0X11,0XA3,0X08,0X49,0X42,
+0XFF,0XF7,0XFF,0XF7,0XFF,0XFF,0XFF,0XFF,0X6A,0X4A,0X01,0X00,0X72,0X84,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XF7,0XDF,0XEF,0X09,0X3A,0XA3,0X08,0X04,0X11,0X04,0X11,0X04,0X11,
+0X04,0X11,0X05,0X11,0X18,0XBE,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XF0,0X7B,0X62,0X00,0XE8,0X31,0XC7,0X31,0X41,0X00,0X35,0XA5,0XFF,0XFF,0X5D,0XEF,
+0X46,0X21,0XC4,0X10,0X04,0X11,0X04,0X11,0X04,0X11,0X04,0X11,0XE4,0X10,0XA3,0X08,
+0X76,0X9D,0XFF,0XF7,0XFF,0XFF,0XB7,0XAD,0XA3,0X08,0XA3,0X08,0XC7,0X31,0X9E,0XE7,
+0XFF,0XF7,0XFF,0XF7,0X76,0XA5,0XA3,0X08,0XE4,0X10,0X04,0X11,0X04,0X11,0X04,0X11,
+0X05,0X11,0X05,0X11,0X35,0XA5,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XDB,0XDE,0XA7,0X29,0X83,0X00,0XC4,0X10,0XC4,0X10,0XC4,0X10,0X1C,0XE7,0X9E,0XEF,
+0X05,0X11,0XE4,0X10,0X04,0X11,0X04,0X11,0X04,0X11,0X04,0X11,0X04,0X19,0XC4,0X08,
+0XE5,0X10,0XD1,0X6B,0XD1,0X6B,0XC5,0X08,0X64,0X00,0XA5,0X08,0X43,0X00,0X2B,0X32,
+0X77,0X9D,0XB3,0X84,0X25,0X19,0XC4,0X10,0X04,0X11,0X04,0X11,0X04,0X11,0X04,0X11,
+0X25,0X19,0X26,0X09,0X35,0X9D,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XAF,0X73,0X62,0X00,0X04,0X19,0X05,0X19,0X82,0X00,0X0D,0X5B,0X8E,0X9B,
+0X62,0X10,0X05,0X11,0X04,0X11,0X04,0X11,0X04,0X19,0XE4,0X10,0X85,0X00,0X05,0X11,
+0XC4,0X39,0X81,0X5A,0X40,0X7B,0X22,0X9C,0X43,0XAC,0X03,0XA4,0X83,0X9B,0X82,0X72,
+0X82,0X49,0XC2,0X18,0XA4,0X00,0XC5,0X00,0XE4,0X10,0X04,0X19,0X04,0X11,0X05,0X19,
+0X47,0X19,0X67,0X11,0XEC,0X5A,0XBE,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XDF,0XFF,0XDB,0XDE,0XC4,0X10,0XE4,0X10,0X04,0X11,0X05,0X11,0XA4,0X18,0X01,0XC0,
+0X83,0X88,0XE4,0X00,0X05,0X19,0X04,0X19,0XC5,0X08,0X44,0X21,0X43,0X83,0X23,0XD5,
+0X42,0XFE,0XE4,0XFE,0X27,0XFF,0X07,0XFF,0XA4,0XFE,0X64,0XFE,0X03,0XFE,0XA3,0XFD,
+0XE2,0XFC,0X42,0XEC,0X83,0XB3,0X24,0X62,0XE5,0X10,0XC4,0X08,0X04,0X19,0X26,0X19,
+0XA8,0X19,0X87,0X21,0X00,0X90,0XD3,0XBC,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XDF,0XFF,0XFF,0XFF,0X10,0X7C,0X42,0X00,0X05,0X19,0X05,0X11,0X83,0X28,0X01,0XD0,
+0X44,0XF8,0XA3,0X48,0XE4,0X00,0XC5,0X08,0X44,0X5A,0X02,0XED,0XE2,0XFD,0X02,0XFE,
+0X66,0XFE,0X74,0XFF,0XB8,0XFF,0X73,0XFF,0XE7,0XF6,0XA6,0XF6,0X45,0XF6,0XA4,0XF5,
+0XC3,0XFC,0X62,0XFC,0XC2,0XFC,0XC2,0XFC,0XE3,0XCB,0XC4,0X49,0X06,0X11,0X88,0X19,
+0X87,0X01,0XA4,0X90,0X01,0XF8,0XEC,0X9A,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XBE,0XF7,0XE8,0X31,0X83,0X00,0X05,0X09,0X82,0X40,0X01,0XC0,
+0X23,0XF8,0X85,0XF0,0XA3,0X48,0XA4,0X00,0X44,0X5A,0X02,0XFD,0X23,0XCC,0XC2,0XDC,
+0X04,0XFE,0X28,0XFE,0X48,0XF6,0X46,0XF6,0X24,0XF6,0XE4,0XF5,0X64,0XFD,0XE3,0XFC,
+0X62,0XFC,0XC2,0XFC,0X02,0XE4,0X02,0XDC,0XE2,0XFC,0XA4,0X7A,0X48,0X01,0X67,0X01,
+0XC4,0X78,0X24,0XF8,0X02,0XF8,0X84,0XB0,0X7D,0XE7,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XDB,0XDE,0X25,0X19,0XA3,0X00,0XC4,0X38,0X02,0XE0,
+0X22,0XD8,0X44,0XF8,0XA6,0XF8,0XA4,0X78,0X63,0X00,0X43,0X21,0X83,0X72,0X83,0X39,
+0X82,0X9B,0X21,0XF5,0X61,0XFD,0X22,0XFD,0XE2,0XFC,0XA2,0XFC,0X42,0XFC,0X42,0XFC,
+0X42,0XFC,0X22,0XAB,0X83,0X41,0XC3,0X92,0X04,0X52,0X26,0X01,0X25,0X19,0XA4,0X98,
+0X44,0XF8,0X23,0XF8,0X02,0XF8,0XA4,0XD0,0X9E,0XEF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0X9A,0XD6,0X87,0X29,0XA5,0X00,0X43,0XB8,
+0X22,0XF8,0X23,0XE0,0X65,0XF8,0XE8,0XF8,0X07,0XC9,0X83,0X48,0X42,0X00,0XA3,0X00,
+0X84,0X00,0X63,0X29,0XA2,0X7A,0X62,0XB3,0XA2,0XCB,0X62,0XD3,0X02,0XBB,0X82,0X8A,
+0X83,0X39,0XA4,0X00,0XE5,0X00,0XE5,0X00,0XE5,0X08,0XC4,0X60,0X64,0XD8,0X44,0XF8,
+0X24,0XF8,0X23,0XF8,0X02,0XF8,0X83,0X88,0XDB,0XC6,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0X3D,0XE7,0X50,0X5B,0X08,0X31,
+0X23,0XE8,0X43,0XF8,0X44,0XF0,0X65,0XF8,0X09,0XF9,0XAB,0XF9,0X89,0XD1,0X06,0X89,
+0XA3,0X48,0X42,0X18,0X02,0X00,0X42,0X00,0X61,0X00,0X82,0X00,0X62,0X00,0X62,0X00,
+0X83,0X00,0XA3,0X20,0XC4,0X50,0XA5,0X88,0X85,0XD8,0X65,0XF8,0X44,0XF8,0X44,0XF8,
+0X23,0XF8,0X23,0XF8,0X03,0XD0,0X82,0X10,0XC7,0X29,0X5D,0XEF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0X6C,0X32,
+0XA5,0X38,0X02,0XD8,0X23,0XF8,0X65,0XF8,0X66,0XF8,0XA7,0XF8,0X4A,0XF9,0X0C,0XFA,
+0X4D,0XFA,0X4C,0XEA,0X0B,0XD2,0XA9,0XB9,0X68,0XB1,0X47,0XA9,0X27,0XB1,0X07,0XB9,
+0X07,0XD1,0XE7,0XE8,0XC7,0XF8,0XA7,0XF8,0X65,0XF8,0X65,0XF8,0X44,0XF8,0X23,0XF8,
+0X03,0XF8,0X02,0XD0,0XA3,0X28,0X05,0X09,0XC4,0X08,0XEC,0X5A,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFB,0XDE,0X05,0X19,
+0XC4,0X00,0XA7,0X41,0XE6,0XC0,0X03,0XF8,0X86,0XF8,0XA7,0XF8,0X87,0XF8,0X86,0XF8,
+0XC7,0XF8,0X29,0XF9,0X8A,0XF9,0XAB,0XF9,0XAB,0XF9,0X8B,0XF9,0X6A,0XF9,0X29,0XF9,
+0X08,0XF9,0XC7,0XF8,0XA6,0XF8,0X86,0XF8,0X65,0XF8,0X64,0XF8,0X23,0XF8,0X02,0XF0,
+0X06,0XB1,0X25,0X29,0XE4,0X00,0XE4,0X10,0X25,0X19,0X25,0X19,0X14,0X9D,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0X96,0XAD,0X62,0X00,
+0X82,0X08,0X35,0X95,0XBA,0XCE,0X8B,0XA2,0X44,0XD0,0X25,0XF8,0X87,0XF8,0XA7,0XF8,
+0XC7,0XF8,0XA7,0XF8,0X87,0XF8,0X86,0XF8,0X86,0XF8,0X86,0XF8,0X87,0XF8,0XA7,0XF8,
+0XA7,0XF8,0XA6,0XF8,0X85,0XF8,0X65,0XF8,0X64,0XF8,0X24,0XF0,0X64,0XB8,0X0D,0X93,
+0XBB,0XB6,0XCF,0X63,0X83,0X08,0X04,0X11,0XE4,0X10,0X66,0X21,0X49,0X3A,0X5D,0XEF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XD3,0X94,0X42,0X00,
+0XE4,0X10,0XBB,0XCE,0XFF,0XFF,0XBE,0XE7,0X76,0XB5,0XCC,0XAA,0X07,0XC1,0X45,0XE0,
+0X45,0XF8,0X46,0XF8,0X66,0XF8,0X86,0XF8,0X86,0XF8,0X86,0XF8,0X86,0XF8,0X65,0XF8,
+0X45,0XF8,0X65,0XF8,0X65,0XE8,0X44,0XD0,0X43,0XA8,0X01,0X88,0X82,0X90,0X3C,0XD7,
+0XFF,0XEF,0X55,0X95,0X83,0X08,0X04,0X11,0X04,0X11,0X05,0X19,0X46,0X19,0XB3,0X94,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XB3,0X94,0X41,0X00,
+0X86,0X21,0X5D,0XDF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XDF,0XE7,0X7A,0XC6,0XD3,0XB4,
+0X4E,0XB3,0X2A,0XC2,0X68,0XD1,0XE6,0XE0,0XA6,0XE8,0XA5,0XE8,0XA5,0XE8,0XE6,0XD8,
+0X88,0XC9,0X06,0XA9,0X22,0XA8,0X02,0XA8,0X00,0XA0,0X00,0XC8,0X00,0XD8,0XF7,0XE5,
+0XFF,0XE7,0XF8,0XAD,0XC4,0X10,0XE4,0X10,0X04,0X11,0XE4,0X10,0X05,0X11,0X8B,0X4A,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0X55,0XA5,0X41,0X00,
+0XA7,0X29,0X5D,0XDF,0XFF,0XF7,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XEF,0X7D,0XDF,0XDB,0XCE,0X59,0XCE,0XF8,0XCD,0XD7,0XCD,0XF7,0XC5,0X79,0XCE,
+0XFB,0XBE,0XAB,0XA2,0X03,0XF0,0X45,0XF8,0X42,0XD0,0X43,0XE8,0X00,0XF0,0X72,0XD4,
+0XFF,0XDF,0X39,0XAE,0XE4,0X10,0XE4,0X10,0X04,0X11,0XE4,0X10,0X05,0X11,0X87,0X29,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0X59,0XCE,0X83,0X08,
+0X46,0X21,0X1C,0XD7,0XFF,0XF7,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XEF,0X8B,0XBA,0X04,0XF8,0X45,0XF8,0X62,0XE0,0X44,0XF0,0X00,0XF8,0X8E,0XDB,
+0XFF,0XDF,0XF8,0XA5,0XC4,0X10,0XE4,0X10,0XE4,0X10,0X04,0X11,0XE4,0X10,0X25,0X19,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XBE,0XF7,0X87,0X29,
+0X83,0X08,0X39,0XB6,0XFF,0XF7,0XDF,0XF7,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XBE,0XE7,0X4A,0XBA,0X03,0XF8,0X45,0XF8,0X64,0XF8,0X44,0XF8,0X00,0XF8,0X6E,0XE3,
+0XFF,0XD7,0XF4,0X8C,0X83,0X08,0X04,0X11,0XE4,0X10,0XE4,0X10,0XE4,0X10,0X05,0X19,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XEF,0X73,
+0X00,0X00,0X72,0X84,0XFF,0XEF,0XBE,0XEF,0XDF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XDF,0XE7,0X8B,0XBA,0X03,0XF8,0X45,0XF8,0X45,0XF8,0X23,0XF8,0X00,0XF8,0XD3,0XD4,
+0XFF,0XD7,0X4E,0X5B,0X21,0X00,0X29,0X3A,0X55,0XA5,0X83,0X08,0XC4,0X10,0X25,0X19,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFB,0XDE,
+0XA3,0X08,0XE8,0X31,0X9E,0XDF,0X9E,0XE7,0XBF,0XEF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XF7,0X51,0XBC,0X02,0XE0,0X03,0XF8,0X03,0XF0,0X43,0XE0,0XEC,0XC2,0X7E,0XCF,
+0XFC,0XBE,0X46,0X21,0X21,0X00,0XD3,0X94,0XFF,0XFF,0X51,0X84,0X00,0X00,0X87,0X29,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0X51,0X84,0X00,0X00,0XF4,0X8C,0XFF,0XEF,0X9E,0XE7,0XBF,0XEF,0XDF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0X3D,0XDF,0X55,0XBD,0X52,0XBC,0X72,0XBC,0XB7,0XB5,0X5D,0XC7,0XFF,0XDF,
+0XF0,0X6B,0X00,0X00,0X09,0X3A,0XBF,0XF7,0XFF,0XFF,0XFF,0XFF,0X14,0X9D,0X55,0XA5,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XAC,0X4A,0XA4,0X08,0XBB,0XBE,0XDF,0XE7,0X7E,0XE7,0XBE,0XEF,0XDF,0XF7,
+0XDF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XDF,0XFF,0XDF,0XF7,0XFF,0XEF,0XDF,0XDF,0XBF,0XD7,0X9E,0XD7,0XDF,0XDF,0XD8,0XA5,
+0X83,0X08,0X26,0X11,0XDB,0XD6,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0X79,0XEE,0X8B,0XDC,0X21,0X31,0XA9,0X21,0X3D,0XCF,0XBF,0XDF,0X7E,0XDF,0X9E,0XE7,
+0XBE,0XEF,0XBF,0XEF,0XDF,0XF7,0XDF,0XF7,0XDF,0XF7,0XDF,0XF7,0XDF,0XF7,0XBF,0XEF,
+0XBE,0XEF,0X9E,0XE7,0X7E,0XDF,0X5E,0XD7,0X5E,0XD7,0XDF,0XDF,0X9A,0XB6,0X26,0X19,
+0X42,0X08,0XED,0XA3,0XBF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0X74,0XDD,
+0XC0,0XDB,0X00,0XFE,0X42,0XEE,0X02,0X42,0X89,0X21,0X7B,0XB6,0XDF,0XDF,0X7E,0XD7,
+0X7E,0XDF,0X7E,0XDF,0X9E,0XE7,0X9E,0XE7,0X9E,0XE7,0X9E,0XE7,0X9E,0XE7,0X7E,0XDF,
+0X7E,0XDF,0X5D,0XD7,0X5D,0XD7,0X9E,0XDF,0XFF,0XE7,0XF8,0XA5,0X07,0X11,0XE3,0X18,
+0X02,0XC5,0X60,0XFD,0XE6,0XD3,0XDB,0XEE,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0X9E,0XF7,0X84,0XBA,
+0XC1,0XFC,0X42,0XFE,0X82,0XFE,0XA2,0XFE,0X81,0X83,0X45,0X21,0X74,0X74,0X5E,0XC7,
+0XDF,0XDF,0X7E,0XD7,0X5E,0XD7,0X5D,0XD7,0X5E,0XD7,0X5E,0XD7,0X5D,0XD7,0X5D,0XD7,
+0X5E,0XD7,0X9E,0XDF,0XFF,0XE7,0X3D,0XC7,0XF1,0X63,0X84,0X08,0X42,0X52,0X26,0XE6,
+0X29,0XFF,0X86,0XFE,0XE0,0XF3,0X6A,0XC3,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0X18,0XDE,0XC1,0XD2,
+0XA2,0XFD,0X22,0XFE,0X42,0XFE,0X42,0XFE,0X62,0XFE,0XE2,0XD4,0X41,0X6A,0X49,0X42,
+0X53,0X74,0X3B,0XA6,0X3E,0XC7,0XBF,0XD7,0XBF,0XD7,0XBF,0XD7,0XBF,0XDF,0XBF,0XD7,
+0X3E,0XC7,0X1A,0XA6,0XF2,0X63,0XA7,0X29,0X82,0X41,0X22,0XB4,0X62,0XFE,0X83,0XFE,
+0XAA,0XFE,0X0F,0XFF,0X67,0XFD,0X63,0XBA,0X3C,0XEF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0X9A,0XE6,0X80,0XD2,
+0X21,0XFD,0XC2,0XFD,0XE2,0XF5,0XC2,0XF5,0X82,0XF5,0X82,0XFD,0X62,0XFD,0X61,0XDC,
+0X21,0X9B,0X84,0X6A,0XE9,0X6A,0X2C,0X63,0XAF,0X63,0X11,0X74,0X6E,0X63,0X2C,0X63,
+0X89,0X5A,0X04,0X52,0X81,0X7A,0XC2,0XCB,0XE2,0XFC,0X62,0XFD,0X82,0XFD,0XC2,0XFD,
+0XC2,0XFD,0XE4,0XFD,0X24,0XFD,0X62,0XCA,0X1C,0XE7,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XB1,0XCC,
+0X81,0XD2,0XC0,0XF3,0XC1,0XFC,0X02,0XFD,0X02,0XFD,0XE2,0XFC,0XC2,0XFC,0XC2,0XFC,
+0X81,0XFC,0X80,0XFB,0XC0,0XC9,0XA4,0X81,0X35,0XAD,0X59,0XCE,0X71,0X9C,0X21,0X81,
+0X00,0XDA,0XA1,0XFB,0X82,0XFC,0XA2,0XFC,0X82,0XFC,0XA2,0XFC,0X02,0XFD,0X22,0XFD,
+0XE2,0XFC,0X00,0XFC,0X60,0XDA,0X90,0XCC,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+0X59,0XDE,0X0D,0XC4,0X06,0XCB,0XE4,0XD2,0X03,0XDB,0X03,0XDB,0XE3,0XDA,0XC3,0XD2,
+0XA4,0XC2,0X09,0XB3,0XD2,0XBC,0X9E,0XF7,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFB,0XE6,
+0X0E,0XB4,0XA6,0XBA,0X83,0XD2,0XE3,0XE2,0X02,0XEB,0X22,0XEB,0X22,0XE3,0X03,0XDB,
+0XE4,0XD2,0X6A,0XC3,0XB6,0XD5,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,0XFF,
+};
+#endif
diff --git a/FinalHomework/Core/Inc/test.h b/FinalHomework/Core/Inc/test.h
new file mode 100644
index 0000000..fa16d04
--- /dev/null
+++ b/FinalHomework/Core/Inc/test.h
@@ -0,0 +1,50 @@
+/****************************************************************************************************
+//=========================================电源接线================================================//
+//     LCD模块                STM32单片机
+//      VCC          接        DC5V/3.3V      //电源
+//      GND          接          GND          //电源地
+//=======================================液晶屏数据线接线==========================================//
+//本模块默认数据总线类型为SPI总线
+//     LCD模块                STM32单片机    
+//       SDA         接          PB15         //液晶屏SPI总线数据写信号
+//=======================================液晶屏控制线接线==========================================//
+//     LCD模块 					      STM32单片机 
+//       LED         接          PB9          //液晶屏背光控制信号，如果不需要控制，接5V或3.3V
+//       SCK         接          PB13         //液晶屏SPI总线时钟信号
+//       A0          接          PB10         //液晶屏数据/命令控制信号
+//       RESET       接          PB12         //液晶屏复位控制信号
+//       CS          接          PB11         //液晶屏片选控制信号
+//=========================================触摸屏触接线=========================================//
+//如果模块不带触摸功能或者带有触摸功能，但是不需要触摸功能，则不需要进行触摸屏接线
+//	   LCD模块                STM32单片机 
+//      T_IRQ        接          PC10         //触摸屏触摸中断信号
+//      T_DO         接          PC2          //触摸屏SPI总线读信号
+//      T_DIN        接          PC3          //触摸屏SPI总线写信号
+//      T_CS         接          PC13         //触摸屏片选控制信号
+//      T_CLK        接          PC0          //触摸屏SPI总线时钟信号
+**************************************************************************************************/	
+ /* @attention
+  *
+  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+  * TIME. AS A RESULT, QD electronic SHALL NOT BE HELD LIABLE FOR ANY
+  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+**************************************************************************************************/	
+#ifndef __TEST_H__
+#define __TEST_H__
+#include "main.h"
+
+void DrawTestPage(uint8_t *str);
+void Test_Color(void);
+void Test_FillRec(void);
+void Test_Circle(void);
+void Test_Triangle(void);
+void English_Font_test(void);
+void Chinese_Font_test(void);
+void Pic_test(void);
+void Load_Drow_Dialog(void);
+void main_test(void);
+void Rotate_Test(void);
+#endif
diff --git a/FinalHomework/Core/Inc/variable.h b/FinalHomework/Core/Inc/variable.h
new file mode 100644
index 0000000..ca1c8fb
--- /dev/null
+++ b/FinalHomework/Core/Inc/variable.h
@@ -0,0 +1,20 @@
+#include <stdint.h>
+#ifndef __VARIABLE_H
+#define __VARIABLE_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef struct {
+    uint8_t mMilSecCount;           // 姣璁℃暟
+    uint8_t bTenMilSecOk;           // 10姣鏍囧織浣�
+    uint8_t mTimeCount;             // 绉掕鏁�
+    uint8_t bTimeOk;                // 绉掓爣蹇椾綅
+} stSysTickTimer;
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __VARIABLE_H */
diff --git a/FinalHomework/Core/Src/gui.c b/FinalHomework/Core/Src/gui.c
new file mode 100644
index 0000000..c0f5fca
--- /dev/null
+++ b/FinalHomework/Core/Src/gui.c
@@ -0,0 +1,762 @@
+/****************************************************************************************************
+//=========================================电源接线================================================//
+//     LCD模块                STM32单片机
+//      VCC          接        DC5V/3.3V      //电源
+//      GND          接          GND          //电源地
+//=======================================液晶屏数据线接线==========================================//
+//本模块默认数据总线类型为SPI总线
+//     LCD模块                STM32单片机    
+//       SDA         接          PB15         //液晶屏SPI总线数据写信号
+//=======================================液晶屏控制线接线==========================================//
+//     LCD模块 					      STM32单片机 
+//       LED         接          PB9          //液晶屏背光控制信号，如果不需要控制，接5V或3.3V
+//       SCK         接          PB13         //液晶屏SPI总线时钟信号
+//       A0          接          PB10         //液晶屏数据/命令控制信号
+//       RESET       接          PB12         //液晶屏复位控制信号
+//       CS          接          PB11         //液晶屏片选控制信号
+//=========================================触摸屏触接线=========================================//
+//如果模块不带触摸功能或者带有触摸功能，但是不需要触摸功能，则不需要进行触摸屏接线
+//	   LCD模块                STM32单片机 
+//      T_IRQ        接          PC10         //触摸屏触摸中断信号
+//      T_DO         接          PC2          //触摸屏SPI总线读信号
+//      T_DIN        接          PC3          //触摸屏SPI总线写信号
+//      T_CS         接          PC13         //触摸屏片选控制信号
+//      T_CLK        接          PC0          //触摸屏SPI总线时钟信号
+**************************************************************************************************/	
+ /* @attention
+  *
+  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+  * TIME. AS A RESULT, QD electronic SHALL NOT BE HELD LIABLE FOR ANY
+  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+**************************************************************************************************/	
+#include "lcd.h"
+#include "string.h"
+#include "font.h" 
+#include "gui.h"
+
+/*******************************************************************
+ * @name       :void GUI_DrawPoint(uint16_t x,uint16_t y,uint16_t color)
+ * @date       :2018-08-09 
+ * @function   :draw a point in LCD screen
+ * @parameters :x:the x coordinate of the point
+                y:the y coordinate of the point
+								color:the color value of the point
+ * @retvalue   :None
+********************************************************************/
+void GUI_DrawPoint(uint16_t x,uint16_t y,uint16_t color)
+{
+	LCD_SetCursor(x,y);//设置光标位置 
+	Lcd_WriteData_16Bit(color); 
+}
+
+/*******************************************************************
+ * @name       :void LCD_Fill(uint16_t sx,uint16_t sy,uint16_t ex,uint16_t ey,uint16_t color)
+ * @date       :2018-08-09 
+ * @function   :fill the specified area
+ * @parameters :sx:the bebinning x coordinate of the specified area
+                sy:the bebinning y coordinate of the specified area
+								ex:the ending x coordinate of the specified area
+								ey:the ending y coordinate of the specified area
+								color:the filled color value
+ * @retvalue   :None
+********************************************************************/
+void LCD_Fill(uint16_t sx,uint16_t sy,uint16_t ex,uint16_t ey,uint16_t color)
+{  	
+	uint16_t i,j;			
+	uint16_t width=ex-sx+1; 		//得到填充的宽度
+	uint16_t height=ey-sy+1;		//高度
+	LCD_SetWindows(sx,sy,ex,ey);	//设置显示窗口
+	for(i=0;i<height;i++)
+	{
+		for(j=0;j<width;j++)
+		Lcd_WriteData_16Bit(color);	//写入数据 	 
+	}
+	LCD_SetWindows(0,0,lcddev.width-1,lcddev.height-1);//恢复窗口设置为全屏
+}
+
+/*******************************************************************
+ * @name       :void LCD_DrawLine(uint16_t x1, uint16_t y1, uint16_t x2, uint16_t y2)
+ * @date       :2018-08-09 
+ * @function   :Draw a line between two points
+ * @parameters :x1:the bebinning x coordinate of the line
+                y1:the bebinning y coordinate of the line
+								x2:the ending x coordinate of the line
+								y2:the ending y coordinate of the line
+ * @retvalue   :None
+********************************************************************/
+void LCD_DrawLine(uint16_t x1, uint16_t y1, uint16_t x2, uint16_t y2)
+{
+	uint16_t t; 
+	int xerr=0,yerr=0,delta_x,delta_y,distance; 
+	int incx,incy,uRow,uCol; 
+
+	delta_x=x2-x1; //计算坐标增量 
+	delta_y=y2-y1; 
+	uRow=x1; 
+	uCol=y1; 
+	if(delta_x>0)incx=1; //设置单步方向 
+	else if(delta_x==0)incx=0;//垂直线 
+	else {incx=-1;delta_x=-delta_x;} 
+	if(delta_y>0)incy=1; 
+	else if(delta_y==0)incy=0;//水平线 
+	else{incy=-1;delta_y=-delta_y;} 
+	if( delta_x>delta_y)distance=delta_x; //选取基本增量坐标轴 
+	else distance=delta_y; 
+	for(t=0;t<=distance+1;t++ )//画线输出 
+	{  
+		LCD_DrawPoint(uRow,uCol);//画点 
+		xerr+=delta_x ; 
+		yerr+=delta_y ; 
+		if(xerr>distance) 
+		{ 
+			xerr-=distance; 
+			uRow+=incx; 
+		} 
+		if(yerr>distance) 
+		{ 
+			yerr-=distance; 
+			uCol+=incy; 
+		} 
+	}  
+} 
+
+/*****************************************************************************
+ * @name       :void LCD_DrawRectangle(uint16_t x1, uint16_t y1, uint16_t x2, uint16_t y2)
+ * @date       :2018-08-09 
+ * @function   :Draw a rectangle
+ * @parameters :x1:the bebinning x coordinate of the rectangle
+                y1:the bebinning y coordinate of the rectangle
+								x2:the ending x coordinate of the rectangle
+								y2:the ending y coordinate of the rectangle
+ * @retvalue   :None
+******************************************************************************/
+void LCD_DrawRectangle(uint16_t x1, uint16_t y1, uint16_t x2, uint16_t y2)
+{
+	LCD_DrawLine(x1,y1,x2,y1);
+	LCD_DrawLine(x1,y1,x1,y2);
+	LCD_DrawLine(x1,y2,x2,y2);
+	LCD_DrawLine(x2,y1,x2,y2);
+}  
+
+/*****************************************************************************
+ * @name       :void LCD_DrawFillRectangle(uint16_t x1, uint16_t y1, uint16_t x2, uint16_t y2)
+ * @date       :2018-08-09 
+ * @function   :Filled a rectangle
+ * @parameters :x1:the bebinning x coordinate of the filled rectangle
+                y1:the bebinning y coordinate of the filled rectangle
+								x2:the ending x coordinate of the filled rectangle
+								y2:the ending y coordinate of the filled rectangle
+ * @retvalue   :None
+******************************************************************************/  
+void LCD_DrawFillRectangle(uint16_t x1, uint16_t y1, uint16_t x2, uint16_t y2)
+{
+	LCD_Fill(x1,y1,x2,y2,POINT_COLOR);
+}
+ 
+/*****************************************************************************
+ * @name       :void _draw_circle_8(int xc, int yc, int x, int y, uint16_t c)
+ * @date       :2018-08-09 
+ * @function   :8 symmetry circle drawing algorithm (internal call)
+ * @parameters :xc:the x coordinate of the Circular center 
+                yc:the y coordinate of the Circular center 
+								x:the x coordinate relative to the Circular center 
+								y:the y coordinate relative to the Circular center 
+								c:the color value of the circle
+ * @retvalue   :None
+******************************************************************************/  
+void _draw_circle_8(int xc, int yc, int x, int y, uint16_t c)
+{
+	GUI_DrawPoint(xc + x, yc + y, c);
+
+	GUI_DrawPoint(xc - x, yc + y, c);
+
+	GUI_DrawPoint(xc + x, yc - y, c);
+
+	GUI_DrawPoint(xc - x, yc - y, c);
+
+	GUI_DrawPoint(xc + y, yc + x, c);
+
+	GUI_DrawPoint(xc - y, yc + x, c);
+
+	GUI_DrawPoint(xc + y, yc - x, c);
+
+	GUI_DrawPoint(xc - y, yc - x, c);
+}
+
+/*****************************************************************************
+ * @name       :void gui_circle(int xc, int yc,uint16_t c,int r, int fill)
+ * @date       :2018-08-09 
+ * @function   :Draw a circle of specified size at a specified location
+ * @parameters :xc:the x coordinate of the Circular center 
+                yc:the y coordinate of the Circular center 
+								r:Circular radius
+								fill:1-filling,0-no filling
+ * @retvalue   :None
+******************************************************************************/  
+void gui_circle(int xc, int yc,uint16_t c,int r, int fill)
+{
+	int x = 0, y = r, yi, d;
+
+	d = 3 - 2 * r;
+
+
+	if (fill) 
+	{
+		// 如果填充（画实心圆）
+		while (x <= y) {
+			for (yi = x; yi <= y; yi++)
+				_draw_circle_8(xc, yc, x, yi, c);
+
+			if (d < 0) {
+				d = d + 4 * x + 6;
+			} else {
+				d = d + 4 * (x - y) + 10;
+				y--;
+			}
+			x++;
+		}
+	} else 
+	{
+		// 如果不填充（画空心圆）
+		while (x <= y) {
+			_draw_circle_8(xc, yc, x, y, c);
+			if (d < 0) {
+				d = d + 4 * x + 6;
+			} else {
+				d = d + 4 * (x - y) + 10;
+				y--;
+			}
+			x++;
+		}
+	}
+}
+
+/*****************************************************************************
+ * @name       :void Draw_Triangel(uint16_t x0,uint16_t y0,uint16_t x1,uint16_t y1,uint16_t x2,uint16_t y2)
+ * @date       :2018-08-09 
+ * @function   :Draw a triangle at a specified position
+ * @parameters :x0:the bebinning x coordinate of the triangular edge 
+                y0:the bebinning y coordinate of the triangular edge 
+								x1:the vertex x coordinate of the triangular
+								y1:the vertex y coordinate of the triangular
+								x2:the ending x coordinate of the triangular edge 
+								y2:the ending y coordinate of the triangular edge 
+ * @retvalue   :None
+******************************************************************************/ 
+void Draw_Triangel(uint16_t x0,uint16_t y0,uint16_t x1,uint16_t y1,uint16_t x2,uint16_t y2)
+{
+	LCD_DrawLine(x0,y0,x1,y1);
+	LCD_DrawLine(x1,y1,x2,y2);
+	LCD_DrawLine(x2,y2,x0,y0);
+}
+
+static void _swap(uint16_t *a, uint16_t *b)
+{
+	uint16_t tmp;
+  tmp = *a;
+	*a = *b;
+	*b = tmp;
+}
+
+/*****************************************************************************
+ * @name       :void Fill_Triangel(uint16_t x0,uint16_t y0,uint16_t x1,uint16_t y1,uint16_t x2,uint16_t y2)
+ * @date       :2018-08-09 
+ * @function   :filling a triangle at a specified position
+ * @parameters :x0:the bebinning x coordinate of the triangular edge 
+                y0:the bebinning y coordinate of the triangular edge 
+								x1:the vertex x coordinate of the triangular
+								y1:the vertex y coordinate of the triangular
+								x2:the ending x coordinate of the triangular edge 
+								y2:the ending y coordinate of the triangular edge 
+ * @retvalue   :None
+******************************************************************************/ 
+void Fill_Triangel(uint16_t x0,uint16_t y0,uint16_t x1,uint16_t y1,uint16_t x2,uint16_t y2)
+{
+	uint16_t a, b, y, last;
+	int dx01, dy01, dx02, dy02, dx12, dy12;
+	long sa = 0;
+	long sb = 0;
+ 	if (y0 > y1) 
+	{
+    _swap(&y0,&y1); 
+		_swap(&x0,&x1);
+ 	}
+ 	if (y1 > y2) 
+	{
+    _swap(&y2,&y1); 
+		_swap(&x2,&x1);
+ 	}
+  if (y0 > y1) 
+	{
+    _swap(&y0,&y1); 
+		_swap(&x0,&x1);
+  }
+	if(y0 == y2) 
+	{ 
+		a = b = x0;
+		if(x1 < a)
+    {
+			a = x1;
+    }
+    else if(x1 > b)
+    {
+			b = x1;
+    }
+    if(x2 < a)
+    {
+			a = x2;
+    }
+		else if(x2 > b)
+    {
+			b = x2;
+    }
+		LCD_Fill(a,y0,b,y0,POINT_COLOR);
+    return;
+	}
+	dx01 = x1 - x0;
+	dy01 = y1 - y0;
+	dx02 = x2 - x0;
+	dy02 = y2 - y0;
+	dx12 = x2 - x1;
+	dy12 = y2 - y1;
+	
+	if(y1 == y2)
+	{
+		last = y1; 
+	}
+  else
+	{
+		last = y1-1; 
+	}
+	for(y=y0; y<=last; y++) 
+	{
+		a = x0 + sa / dy01;
+		b = x0 + sb / dy02;
+		sa += dx01;
+    sb += dx02;
+    if(a > b)
+    {
+			_swap(&a,&b);
+		}
+		LCD_Fill(a,y,b,y,POINT_COLOR);
+	}
+	sa = dx12 * (y - y1);
+	sb = dx02 * (y - y0);
+	for(; y<=y2; y++) 
+	{
+		a = x1 + sa / dy12;
+		b = x0 + sb / dy02;
+		sa += dx12;
+		sb += dx02;
+		if(a > b)
+		{
+			_swap(&a,&b);
+		}
+		LCD_Fill(a,y,b,y,POINT_COLOR);
+	}
+}
+
+/*****************************************************************************
+ * @name       :void LCD_ShowChar(uint16_t x,uint16_t y,uint16_t fc, uint16_t bc, uint8_t num,uint8_t size,uint8_t mode)
+ * @date       :2018-08-09 
+ * @function   :Display a single English character
+ * @parameters :x:the bebinning x coordinate of the Character display position
+                y:the bebinning y coordinate of the Character display position
+								fc:the color value of display character
+								bc:the background color of display character
+								num:the ascii code of display character(0~94)
+								size:the size of display character
+								mode:0-no overlying,1-overlying
+ * @retvalue   :None
+******************************************************************************/ 
+void LCD_ShowChar(uint16_t x,uint16_t y,uint16_t fc, uint16_t bc, uint8_t num,uint8_t size,uint8_t mode)
+{  
+    uint8_t temp;
+    uint8_t pos,t;
+	uint16_t colortemp=POINT_COLOR;      
+		   
+	num=num-' ';//得到偏移后的值
+	LCD_SetWindows(x,y,x+size/2-1,y+size-1);//设置单个文字显示窗口
+	if(!mode) //非叠加方式
+	{		
+		for(pos=0;pos<size;pos++)
+		{
+			if(size==12)temp=asc2_1206[num][pos];//调用1206字体
+			else temp=asc2_1608[num][pos];		 //调用1608字体
+			for(t=0;t<size/2;t++)
+		    {                 
+		        if(temp&0x01)Lcd_WriteData_16Bit(fc); 
+				else Lcd_WriteData_16Bit(bc); 
+				temp>>=1; 
+				
+		    }
+			
+		}	
+	}else//叠加方式
+	{
+		for(pos=0;pos<size;pos++)
+		{
+			if(size==12)temp=asc2_1206[num][pos];//调用1206字体
+			else temp=asc2_1608[num][pos];		 //调用1608字体
+			for(t=0;t<size/2;t++)
+		    {   
+				POINT_COLOR=fc;              
+		        if(temp&0x01)LCD_DrawPoint(x+t,y+pos);//画一个点    
+		        temp>>=1; 
+		    }
+		}
+	}
+	POINT_COLOR=colortemp;	
+	LCD_SetWindows(0,0,lcddev.width-1,lcddev.height-1);//恢复窗口为全屏    	   	 	  
+}
+
+/*****************************************************************************
+ * @name       :void LCD_ShowString(uint16_t x,uint16_t y,uint8_t size,uint8_t *p,uint8_t mode)
+ * @date       :2018-08-09 
+ * @function   :Display English string
+ * @parameters :x:the bebinning x coordinate of the English string
+                y:the bebinning y coordinate of the English string
+								p:the start address of the English string
+								size:the size of display character
+								mode:0-no overlying,1-overlying
+ * @retvalue   :None
+******************************************************************************/   	  
+void LCD_ShowString(uint16_t x,uint16_t y,uint8_t size,uint8_t *p,uint8_t mode)
+{         
+    while((*p<='~')&&(*p>=' '))//判断是不是非法字符!
+    {   
+		if(x>(lcddev.width-1)||y>(lcddev.height-1)) 
+		return;     
+        LCD_ShowChar(x,y,POINT_COLOR,BACK_COLOR,*p,size,mode);
+        x+=size/2;
+        p++;
+    }  
+} 
+
+/*****************************************************************************
+ * @name       :uint32_t mypow(uint8_t m,uint8_t n)
+ * @date       :2018-08-09 
+ * @function   :get the nth power of m (internal call)
+ * @parameters :m:the multiplier
+                n:the power
+ * @retvalue   :the nth power of m
+******************************************************************************/ 
+uint32_t mypow(uint8_t m,uint8_t n)
+{
+	uint32_t result=1;	 
+	while(n--)result*=m;    
+	return result;
+}
+
+/*****************************************************************************
+ * @name       :void LCD_ShowNum(uint16_t x,uint16_t y,uint32_t num,uint8_t len,uint8_t size)
+ * @date       :2018-08-09 
+ * @function   :Display number
+ * @parameters :x:the bebinning x coordinate of the number
+                y:the bebinning y coordinate of the number
+								num:the number(0~4294967295)
+								len:the length of the display number
+								size:the size of display number
+ * @retvalue   :None
+******************************************************************************/  			 
+void LCD_ShowNum(uint16_t x,uint16_t y,uint32_t num,uint8_t len,uint8_t size)
+{         	
+	uint8_t t,temp;
+	uint8_t enshow=0;						   
+	for(t=0;t<len;t++)
+	{
+		temp=(num/mypow(10,len-t-1))%10;
+		if(enshow==0&&t<(len-1))
+		{
+			if(temp==0)
+			{
+				LCD_ShowChar(x+(size/2)*t,y,POINT_COLOR,BACK_COLOR,' ',size,0);
+				continue;
+			}else enshow=1; 
+		 	 
+		}
+	 	LCD_ShowChar(x+(size/2)*t,y,POINT_COLOR,BACK_COLOR,temp+'0',size,0); 
+	}
+} 
+
+/*****************************************************************************
+ * @name       :void GUI_DrawFont16(uint16_t x, uint16_t y, uint16_t fc, uint16_t bc, uint8_t *s,uint8_t mode)
+ * @date       :2018-08-09 
+ * @function   :Display a single 16x16 Chinese character
+ * @parameters :x:the bebinning x coordinate of the Chinese character
+                y:the bebinning y coordinate of the Chinese character
+								fc:the color value of Chinese character
+								bc:the background color of Chinese character
+								s:the start address of the Chinese character
+								mode:0-no overlying,1-overlying
+ * @retvalue   :None
+******************************************************************************/ 
+void GUI_DrawFont16(uint16_t x, uint16_t y, uint16_t fc, uint16_t bc, uint8_t *s,uint8_t mode)
+{
+	uint8_t i,j;
+	uint16_t k;
+	uint16_t HZnum;
+	uint16_t x0=x;
+	HZnum=sizeof(tfont16)/sizeof(typFNT_GB16);	//自动统计汉字数目
+	
+			
+	for (k=0;k<HZnum;k++) 
+	{
+	  if ((tfont16[k].Index[0]==*(s))&&(tfont16[k].Index[1]==*(s+1)))
+	  { 	LCD_SetWindows(x,y,x+16-1,y+16-1);
+		    for(i=0;i<16*2;i++)
+		    {
+				for(j=0;j<8;j++)
+		    	{	
+					if(!mode) //非叠加方式
+					{
+						if(tfont16[k].Msk[i]&(0x80>>j))	Lcd_WriteData_16Bit(fc);
+						else Lcd_WriteData_16Bit(bc);
+					}
+					else
+					{
+						POINT_COLOR=fc;
+						if(tfont16[k].Msk[i]&(0x80>>j))	LCD_DrawPoint(x,y);//画一个点
+						x++;
+						if((x-x0)==16)
+						{
+							x=x0;
+							y++;
+							break;
+						}
+					}
+
+				}
+				
+			}
+			
+			
+		}				  	
+		continue;  //查找到对应点阵字库立即退出，防止多个汉字重复取模带来影响
+	}
+
+	LCD_SetWindows(0,0,lcddev.width-1,lcddev.height-1);//恢复窗口为全屏  
+} 
+
+/*****************************************************************************
+ * @name       :void GUI_DrawFont24(uint16_t x, uint16_t y, uint16_t fc, uint16_t bc, uint8_t *s,uint8_t mode)
+ * @date       :2018-08-09 
+ * @function   :Display a single 24x24 Chinese character
+ * @parameters :x:the bebinning x coordinate of the Chinese character
+                y:the bebinning y coordinate of the Chinese character
+								fc:the color value of Chinese character
+								bc:the background color of Chinese character
+								s:the start address of the Chinese character
+								mode:0-no overlying,1-overlying
+ * @retvalue   :None
+******************************************************************************/ 
+void GUI_DrawFont24(uint16_t x, uint16_t y, uint16_t fc, uint16_t bc, uint8_t *s,uint8_t mode)
+{
+	uint8_t i,j;
+	uint16_t k;
+	uint16_t HZnum;
+	uint16_t x0=x;
+	HZnum=sizeof(tfont24)/sizeof(typFNT_GB24);	//自动统计汉字数目
+		
+			for (k=0;k<HZnum;k++) 
+			{
+			  if ((tfont24[k].Index[0]==*(s))&&(tfont24[k].Index[1]==*(s+1)))
+			  { 	LCD_SetWindows(x,y,x+24-1,y+24-1);
+				    for(i=0;i<24*3;i++)
+				    {
+							for(j=0;j<8;j++)
+							{
+								if(!mode) //非叠加方式
+								{
+									if(tfont24[k].Msk[i]&(0x80>>j))	Lcd_WriteData_16Bit(fc);
+									else Lcd_WriteData_16Bit(bc);
+								}
+							else
+							{
+								POINT_COLOR=fc;
+								if(tfont24[k].Msk[i]&(0x80>>j))	LCD_DrawPoint(x,y);//画一个点
+								x++;
+								if((x-x0)==24)
+								{
+									x=x0;
+									y++;
+									break;
+								}
+							}
+						}
+					}
+					
+					
+				}				  	
+				continue;  //查找到对应点阵字库立即退出，防止多个汉字重复取模带来影响
+			}
+
+	LCD_SetWindows(0,0,lcddev.width-1,lcddev.height-1);//恢复窗口为全屏  
+}
+
+/*****************************************************************************
+ * @name       :void GUI_DrawFont32(uint16_t x, uint16_t y, uint16_t fc, uint16_t bc, uint8_t *s,uint8_t mode)
+ * @date       :2018-08-09 
+ * @function   :Display a single 32x32 Chinese character
+ * @parameters :x:the bebinning x coordinate of the Chinese character
+                y:the bebinning y coordinate of the Chinese character
+								fc:the color value of Chinese character
+								bc:the background color of Chinese character
+								s:the start address of the Chinese character
+								mode:0-no overlying,1-overlying
+ * @retvalue   :None
+******************************************************************************/ 
+void GUI_DrawFont32(uint16_t x, uint16_t y, uint16_t fc, uint16_t bc, uint8_t *s,uint8_t mode)
+{
+	uint8_t i,j;
+	uint16_t k;
+	uint16_t HZnum;
+	uint16_t x0=x;
+	HZnum=sizeof(tfont32)/sizeof(typFNT_GB32);	//自动统计汉字数目
+	for (k=0;k<HZnum;k++) 
+			{
+			  if ((tfont32[k].Index[0]==*(s))&&(tfont32[k].Index[1]==*(s+1)))
+			  { 	LCD_SetWindows(x,y,x+32-1,y+32-1);
+				    for(i=0;i<32*4;i++)
+				    {
+						for(j=0;j<8;j++)
+				    	{
+							if(!mode) //非叠加方式
+							{
+								if(tfont32[k].Msk[i]&(0x80>>j))	Lcd_WriteData_16Bit(fc);
+								else Lcd_WriteData_16Bit(bc);
+							}
+							else
+							{
+								POINT_COLOR=fc;
+								if(tfont32[k].Msk[i]&(0x80>>j))	LCD_DrawPoint(x,y);//画一个点
+								x++;
+								if((x-x0)==32)
+								{
+									x=x0;
+									y++;
+									break;
+								}
+							}
+						}
+					}
+					
+					
+				}				  	
+				continue;  //查找到对应点阵字库立即退出，防止多个汉字重复取模带来影响
+			}
+	
+	LCD_SetWindows(0,0,lcddev.width-1,lcddev.height-1);//恢复窗口为全屏  
+} 
+
+/*****************************************************************************
+ * @name       :void Show_Str(uint16_t x, uint16_t y, uint16_t fc, uint16_t bc, uint8_t *str,uint8_t size,uint8_t mode)
+ * @date       :2018-08-09 
+ * @function   :Display Chinese and English strings
+ * @parameters :x:the bebinning x coordinate of the Chinese and English strings
+                y:the bebinning y coordinate of the Chinese and English strings
+								fc:the color value of Chinese and English strings
+								bc:the background color of Chinese and English strings
+								str:the start address of the Chinese and English strings
+								size:the size of Chinese and English strings
+								mode:0-no overlying,1-overlying
+ * @retvalue   :None
+******************************************************************************/	   		   
+void Show_Str(uint16_t x, uint16_t y, uint16_t fc, uint16_t bc, uint8_t *str,uint8_t size,uint8_t mode)
+{					
+	uint16_t x0=x;							  	  
+  	uint8_t bHz=0;     //字符或者中文 
+    while(*str!=0)//数据未结束
+    { 
+        if(!bHz)
+        {
+			if(x>(lcddev.width-size/2)||y>(lcddev.height-size)) 
+			return; 
+	        if(*str>0x80)bHz=1;//中文 
+	        else              //字符
+	        {          
+		        if(*str==0x0D)//换行符号
+		        {         
+		            y+=size;
+					x=x0;
+		            str++; 
+		        }  
+		        else
+				{
+					if(size>16)//字库中没有集成12X24 16X32的英文字体,用8X16代替
+					{  
+					LCD_ShowChar(x,y,fc,bc,*str,16,mode);
+					x+=8; //字符,为全字的一半 
+					}
+					else
+					{
+					LCD_ShowChar(x,y,fc,bc,*str,size,mode);
+					x+=size/2; //字符,为全字的一半 
+					}
+				} 
+				str++; 
+		        
+	        }
+        }else//中文 
+        {   
+			if(x>(lcddev.width-size)||y>(lcddev.height-size)) 
+			return;  
+            bHz=0;//有汉字库    
+			if(size==32)
+			GUI_DrawFont32(x,y,fc,bc,str,mode);	 	
+			else if(size==24)
+			GUI_DrawFont24(x,y,fc,bc,str,mode);	
+			else
+			GUI_DrawFont16(x,y,fc,bc,str,mode);
+				
+	        str+=2; 
+	        x+=size;//下一个汉字偏移	    
+        }						 
+    }   
+}
+
+/*****************************************************************************
+ * @name       :void Gui_StrCenter(uint16_t x, uint16_t y, uint16_t fc, uint16_t bc, uint8_t *str,uint8_t size,uint8_t mode)
+ * @date       :2018-08-09 
+ * @function   :Centered display of English and Chinese strings
+ * @parameters :x:the bebinning x coordinate of the Chinese and English strings
+                y:the bebinning y coordinate of the Chinese and English strings
+								fc:the color value of Chinese and English strings
+								bc:the background color of Chinese and English strings
+								str:the start address of the Chinese and English strings
+								size:the size of Chinese and English strings
+								mode:0-no overlying,1-overlying
+ * @retvalue   :None
+******************************************************************************/ 
+void Gui_StrCenter(uint16_t x, uint16_t y, uint16_t fc, uint16_t bc, uint8_t *str,uint8_t size,uint8_t mode)
+{
+	uint16_t len=strlen((const char *)str);
+	uint16_t x1=(lcddev.width-len*8)/2;
+	Show_Str(x1,y,fc,bc,str,size,mode);
+} 
+ 
+/*****************************************************************************
+ * @name       :void Gui_Drawbmp16(uint16_t x,uint16_t y,const unsigned char *p)
+ * @date       :2018-08-09 
+ * @function   :Display a 16-bit BMP image
+ * @parameters :x:the bebinning x coordinate of the BMP image
+                y:the bebinning y coordinate of the BMP image
+								p:the start address of image array
+ * @retvalue   :None
+******************************************************************************/ 
+void Gui_Drawbmp16(uint16_t x,uint16_t y,const unsigned char *p) //显示40*40 QQ图片
+{
+  	int i; 
+	unsigned char picH,picL; 
+	LCD_SetWindows(x,y,x+40-1,y+40-1);//窗口设置
+    for(i=0;i<40*40;i++)
+	{	
+	 	picL=*(p+i*2);	//数据低位在前
+		picH=*(p+i*2+1);				
+		Lcd_WriteData_16Bit(picH<<8|picL);  						
+	}	
+	LCD_SetWindows(0,0,lcddev.width-1,lcddev.height-1);//恢复显示窗口为全屏	
+}
diff --git a/FinalHomework/Core/Src/lcd.c b/FinalHomework/Core/Src/lcd.c
new file mode 100644
index 0000000..94fdffd
--- /dev/null
+++ b/FinalHomework/Core/Src/lcd.c
@@ -0,0 +1,384 @@
+/****************************************************************************************************
+//=========================================电源接线================================================//
+//     LCD模块                STM32单片机
+//      VCC          接        DC5V/3.3V      //电源
+//      GND          接          GND          //电源地
+//=======================================液晶屏数据线接线==========================================//
+//本模块默认数据总线类型为SPI总线
+//     LCD模块                STM32单片机    
+//       SDA         接          PB15         //液晶屏SPI总线数据写信号
+//=======================================液晶屏控制线接线==========================================//
+//     LCD模块 					      STM32单片机 
+//       SCK         接          PB13         //液晶屏SPI总线时钟信号
+//       A0          接          PB10         //液晶屏数据/命令控制信号
+//       RESET       接          PB12         //液晶屏复位控制信号
+//       CS          接          PB11         //液晶屏片选控制信号
+**************************************************************************************************/	
+ /* @attention
+  *
+  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+  * TIME. AS A RESULT, QD electronic SHALL NOT BE HELD LIABLE FOR ANY
+  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+**************************************************************************************************/	
+#include "lcd.h"
+#include "stdlib.h"
+
+#include "spi.h"
+#include "main.h"
+
+	   
+//管理LCD重要参数
+//默认为竖屏
+_lcd_dev lcddev;
+
+//画笔颜色,背景颜色
+uint16_t POINT_COLOR = 0x0000,BACK_COLOR = 0xFFFF;  
+uint16_t DeviceCode;	 
+
+/*****************************************************************************
+ * @name       :u8 SPI_WriteByte(x,u8 Byte)
+ * @date       :2018-08-09 
+ * @function   :Write a byte of data using STM32's hardware SPI
+ * @parameters : Byte:Data to be written
+******************************************************************************/
+uint8_t SPI2_ReadWriteByte( uint8_t TxData)
+{
+    uint8_t Rxdata;
+    HAL_SPI_TransmitReceive(&hspi2,&TxData,&Rxdata,1, 1000);       
+ 	return Rxdata;		
+} 
+
+/*****************************************************************************
+ * @name       :void LCD_WR_REG(uint8_t data)
+ * @date       :2018-08-09 
+ * @function   :Write an 8-bit command to the LCD screen
+ * @parameters :data:Command value to be written
+ * @retvalue   :None
+******************************************************************************/
+void LCD_WR_REG(uint8_t data)
+{ 
+   LCD_CS_CLR;     
+	LCD_RS_CLR;	  
+	SPI2_ReadWriteByte(data);
+   LCD_CS_SET;	
+}
+
+/*****************************************************************************
+ * @name       :void LCD_WR_DATA(uint8_t data)
+ * @date       :2018-08-09 
+ * @function   :Write an 8-bit data to the LCD screen
+ * @parameters :data:data value to be written
+ * @retvalue   :None
+******************************************************************************/
+void LCD_WR_DATA(uint8_t data)
+{
+   LCD_CS_CLR;
+	 LCD_RS_SET;
+	SPI2_ReadWriteByte(data);
+   LCD_CS_SET;
+}
+
+/*****************************************************************************
+ * @name       :void LCD_WriteReg(uint8_t LCD_Reg, uint16_t LCD_RegValue)
+ * @date       :2018-08-09 
+ * @function   :Write data into registers
+ * @parameters :LCD_Reg:Register address
+                LCD_RegValue:Data to be written
+ * @retvalue   :None
+******************************************************************************/
+void LCD_WriteReg(uint8_t LCD_Reg, uint16_t LCD_RegValue)
+{	
+	LCD_WR_REG(LCD_Reg);  
+	LCD_WR_DATA(LCD_RegValue);	    		 
+}	   
+
+/*****************************************************************************
+ * @name       :void LCD_WriteRAM_Prepare(void)
+ * @date       :2018-08-09 
+ * @function   :Write GRAM
+ * @parameters :None
+ * @retvalue   :None
+******************************************************************************/	 
+void LCD_WriteRAM_Prepare(void)
+{
+	LCD_WR_REG(lcddev.wramcmd);
+}	 
+
+/*****************************************************************************
+ * @name       :void Lcd_WriteData_16Bit(uint16_t Data)
+ * @date       :2018-08-09 
+ * @function   :Write an 16-bit command to the LCD screen
+ * @parameters :Data:Data to be written
+ * @retvalue   :None
+******************************************************************************/	 
+void Lcd_WriteData_16Bit(uint16_t Data)
+{	
+   LCD_CS_CLR;
+   LCD_RS_SET;  
+   //SPI_WriteByte(SPI2,Data>>8);
+	SPI2_ReadWriteByte(Data>>8);
+	SPI2_ReadWriteByte(Data);
+   LCD_CS_SET;
+}
+
+/*****************************************************************************
+ * @name       :void LCD_DrawPoint(uint16_t x,uint16_t y)
+ * @date       :2018-08-09 
+ * @function   :Write a pixel data at a specified location
+ * @parameters :x:the x coordinate of the pixel
+                y:the y coordinate of the pixel
+ * @retvalue   :None
+******************************************************************************/	
+void LCD_DrawPoint(uint16_t x,uint16_t y)
+{
+	LCD_SetCursor(x,y);//设置光标位置 
+	Lcd_WriteData_16Bit(POINT_COLOR); 
+}
+
+/*****************************************************************************
+ * @name       :void LCD_Clear(uint16_t Color)
+ * @date       :2018-08-09 
+ * @function   :Full screen filled LCD screen
+ * @parameters :color:Filled color
+ * @retvalue   :None
+******************************************************************************/	
+void LCD_Clear(uint16_t Color)
+{
+  unsigned int i,m;  
+	LCD_SetWindows(0,0,lcddev.width-1,lcddev.height-1);   
+	LCD_CS_CLR;
+	LCD_RS_SET;
+	for(i=0;i<lcddev.height;i++)
+	{
+		for(m=0;m<lcddev.width;m++)
+		{	
+			Lcd_WriteData_16Bit(Color);
+		}
+	}
+	 LCD_CS_SET;
+} 
+
+
+/*****************************************************************************
+ * @name       :void LCD_RESET(void)
+ * @date       :2018-08-09 
+ * @function   :Reset LCD screen
+ * @parameters :None
+ * @retvalue   :None
+******************************************************************************/	
+void LCD_RESET(void)
+{
+	LCD_RST_CLR;
+	HAL_Delay(100);	
+	LCD_RST_SET;
+	HAL_Delay(50);
+}
+
+/*****************************************************************************
+ * @name       :void LCD_RESET(void)
+ * @date       :2018-08-09 
+ * @function   :Initialization LCD screen
+ * @parameters :None
+ * @retvalue   :None
+******************************************************************************/	 	 
+void LCD_Init(void)
+{  								 
+ 	LCD_RESET(); //LCD 复位	
+//************* ST7735S初始化**********//	
+	LCD_WR_REG(0x11);//Sleep exit 
+	HAL_Delay (120);	
+	
+	//ST7735R Frame Rate
+	LCD_WR_REG(0xB1); 
+	LCD_WR_DATA(0x01); 
+	LCD_WR_DATA(0x2C); 
+	LCD_WR_DATA(0x2D); 
+	
+	LCD_WR_REG(0xB2); 
+	LCD_WR_DATA(0x01); 
+	LCD_WR_DATA(0x2C); 
+	LCD_WR_DATA(0x2D); 
+	
+	LCD_WR_REG(0xB3); 
+	LCD_WR_DATA(0x01); 
+	LCD_WR_DATA(0x2C); 
+	LCD_WR_DATA(0x2D); 
+	LCD_WR_DATA(0x01); 
+	LCD_WR_DATA(0x2C); 
+	LCD_WR_DATA(0x2D); 
+	
+	LCD_WR_REG(0xB4); //Column inversion 
+	LCD_WR_DATA(0x07); 	
+	//ST7735R Power Sequence
+	LCD_WR_REG(0xC0); 
+	LCD_WR_DATA(0xA2); 
+	LCD_WR_DATA(0x02); 
+	LCD_WR_DATA(0x84); 
+	
+	LCD_WR_REG(0xC1); 
+	LCD_WR_DATA(0xC5);
+	
+	LCD_WR_REG(0xC2); 
+	LCD_WR_DATA(0x0A); 
+	LCD_WR_DATA(0x00); 
+	
+	LCD_WR_REG(0xC3); 
+	LCD_WR_DATA(0x8A); 
+	LCD_WR_DATA(0x2A);
+	
+	LCD_WR_REG(0xC4); 
+	LCD_WR_DATA(0x8A); 
+	LCD_WR_DATA(0xEE); 
+	
+	LCD_WR_REG(0xC5); //VCOM 
+	LCD_WR_DATA(0x0E); 	
+	
+	LCD_WR_REG(0x36); //MX, MY, RGB mode 
+	LCD_WR_DATA(0xC0); 
+	
+	//ST7735R Gamma Sequence
+	LCD_WR_REG(0xe0); 
+	LCD_WR_DATA(0x0f); 
+	LCD_WR_DATA(0x1a); 
+	LCD_WR_DATA(0x0f); 
+	LCD_WR_DATA(0x18); 
+	LCD_WR_DATA(0x2f); 
+	LCD_WR_DATA(0x28); 
+	LCD_WR_DATA(0x20); 
+	LCD_WR_DATA(0x22); 
+	LCD_WR_DATA(0x1f); 
+	LCD_WR_DATA(0x1b); 
+	LCD_WR_DATA(0x23); 
+	LCD_WR_DATA(0x37); 
+	LCD_WR_DATA(0x00); 	
+	LCD_WR_DATA(0x07); 
+	LCD_WR_DATA(0x02); 
+	LCD_WR_DATA(0x10);
+	
+	LCD_WR_REG(0xe1); 
+	LCD_WR_DATA(0x0f); 
+	LCD_WR_DATA(0x1b); 
+	LCD_WR_DATA(0x0f); 
+	LCD_WR_DATA(0x17); 
+	LCD_WR_DATA(0x33); 
+	LCD_WR_DATA(0x2c); 
+	LCD_WR_DATA(0x29); 
+	LCD_WR_DATA(0x2e); 
+	LCD_WR_DATA(0x30); 
+	LCD_WR_DATA(0x30); 
+	LCD_WR_DATA(0x39); 
+	LCD_WR_DATA(0x3f); 
+	LCD_WR_DATA(0x00); 
+	LCD_WR_DATA(0x07); 
+	LCD_WR_DATA(0x03); 
+	LCD_WR_DATA(0x10); 
+ 	
+	LCD_WR_REG(0x2a);
+	LCD_WR_DATA(0x00);
+	LCD_WR_DATA(0x00);
+	LCD_WR_DATA(0x00);
+	LCD_WR_DATA(0x7f);
+	LCD_WR_REG(0x2b);
+	LCD_WR_DATA(0x00);
+	LCD_WR_DATA(0x00);
+	LCD_WR_DATA(0x00);
+	LCD_WR_DATA(0x9f);
+	
+	LCD_WR_REG(0xF0); //Enable test command  
+	LCD_WR_DATA(0x01); 
+	
+	LCD_WR_REG(0xF6); //Disable ram power save mode 
+	LCD_WR_DATA(0x00); 	
+	
+	LCD_WR_REG(0x3A); //65k mode 
+	LCD_WR_DATA(0x05); 
+	
+	LCD_WR_REG(0x29);//Display on	
+ 	
+	LCD_direction(USE_HORIZONTAL);//设置LCD显示方向	 
+	LCD_Clear(WHITE);//清全屏白色
+}
+ 
+/*****************************************************************************
+ * @name       :void LCD_SetWindows(uint16_t xStar, uint16_t yStar,uint16_t xEnd,uint16_t yEnd)
+ * @date       :2018-08-09 
+ * @function   :Setting LCD display window
+ * @parameters :xStar:the bebinning x coordinate of the LCD display window
+								yStar:the bebinning y coordinate of the LCD display window
+								xEnd:the endning x coordinate of the LCD display window
+								yEnd:the endning y coordinate of the LCD display window
+ * @retvalue   :None
+******************************************************************************/ 
+void LCD_SetWindows(uint16_t xStar, uint16_t yStar,uint16_t xEnd,uint16_t yEnd)
+{	
+	LCD_WR_REG(lcddev.setxcmd);	//LCD_WR_REG(0x2a);//列地址设置
+	LCD_WR_DATA(0x00);
+	LCD_WR_DATA(xStar);		
+	LCD_WR_DATA(0x00);
+	LCD_WR_DATA(xEnd);
+
+	LCD_WR_REG(lcddev.setycmd);	//LCD_WR_REG(0x2b);//行地址设置
+	LCD_WR_DATA(0x00);
+	LCD_WR_DATA(yStar);		
+	LCD_WR_DATA(0x00);
+	LCD_WR_DATA(yEnd);
+
+	LCD_WriteRAM_Prepare(); 	//开始写入GRAM			
+}   
+
+/*****************************************************************************
+ * @name       :void LCD_SetCursor(uint16_t Xpos, uint16_t Ypos)
+ * @date       :2018-08-09 
+ * @function   :Set coordinate value
+ * @parameters :Xpos:the  x coordinate of the pixel
+								Ypos:the  y coordinate of the pixel
+ * @retvalue   :None
+******************************************************************************/ 
+void LCD_SetCursor(uint16_t Xpos, uint16_t Ypos)
+{	  	    			
+	LCD_SetWindows(Xpos,Ypos,Xpos,Ypos);	
+} 
+
+/*****************************************************************************
+ * @name       :void LCD_direction(uint8_t direction)
+ * @date       :2018-08-09 
+ * @function   :Setting the display direction of LCD screen
+ * @parameters :direction:		0-0 degree
+								1-90 degree
+								2-180 degree
+								3-270 degree
+ * @retvalue   :None
+******************************************************************************/ 
+void LCD_direction(uint8_t direction)
+{ 
+	lcddev.setxcmd=0x2A;
+	lcddev.setycmd=0x2B;
+	lcddev.wramcmd=0x2C;
+	switch(direction)
+	{		  
+		case 0:						 	 		
+			lcddev.width=LCD_W;
+			lcddev.height=LCD_H;		
+			LCD_WriteReg(0x36,(0<<3)|(1<<6)|(1<<7));//BGR==1,MY==0,MX==0,MV==0
+		break;
+		case 1:
+			lcddev.width=LCD_H;
+			lcddev.height=LCD_W;
+			LCD_WriteReg(0x36,(0<<3)|(1<<7)|(1<<5));//BGR==1,MY==1,MX==0,MV==1
+		break;
+		case 2:						 	 		
+			lcddev.width=LCD_W;
+			lcddev.height=LCD_H;	
+			LCD_WriteReg(0x36,(0<<3)|(0<<6)|(0<<7));//BGR==1,MY==0,MX==0,MV==0
+		break;
+		case 3:
+			lcddev.width= LCD_H;
+			lcddev.height=LCD_W;
+			LCD_WriteReg(0x36,(0<<3)|(0<<7)|(1<<6)|(1<<5));//BGR==1,MY==1,MX==0,MV==1
+		break;	
+		default:break;
+	}		
+}	 
diff --git a/FinalHomework/Core/Src/main.c b/FinalHomework/Core/Src/main.c
index ac715e1..ab3d40a 100644
--- a/FinalHomework/Core/Src/main.c
+++ b/FinalHomework/Core/Src/main.c
@@ -23,7 +23,9 @@
 
 /* Private includes ----------------------------------------------------------*/
 /* USER CODE BEGIN Includes */
-
+#include "variable.h"
+#include "lcd.h"
+#include "test.h"
 /* USER CODE END Includes */
 
 /* Private typedef -----------------------------------------------------------*/
@@ -44,7 +46,11 @@
 /* Private variables ---------------------------------------------------------*/
 
 /* USER CODE BEGIN PV */
-
+stSysTickTimer sSysTickTimer = {
+  0, 0, 0, 0
+};
+uint16_t mSecCount = 0;
+uint16_t bSecondIsOk = 0;
 /* USER CODE END PV */
 
 /* Private function prototypes -----------------------------------------------*/
@@ -89,7 +95,7 @@ int main(void)
   MX_GPIO_Init();
   MX_SPI2_Init();
   /* USER CODE BEGIN 2 */
-
+  LCD_Init();
   /* USER CODE END 2 */
 
   /* Infinite loop */
@@ -99,6 +105,19 @@ int main(void)
     /* USER CODE END WHILE */
 
     /* USER CODE BEGIN 3 */
+    main_test();
+    Test_Color();
+    Test_FillRec();
+    Test_Circle();
+    Test_Triangle();
+    English_Font_test();
+    Chinese_Font_test();
+    Pic_test();
+    Rotate_Test();
+    if (sSysTickTimer.bTimeOk) {
+      sSysTickTimer.bTimeOk = 0;
+      HAL_GPIO_TogglePin(TickLed_GPIO_Port, TickLed_Pin);
+    }
   }
   /* USER CODE END 3 */
 }
diff --git a/FinalHomework/Core/Src/spi.c b/FinalHomework/Core/Src/spi.c
index 5dfb046..035053c 100644
--- a/FinalHomework/Core/Src/spi.c
+++ b/FinalHomework/Core/Src/spi.c
@@ -40,7 +40,7 @@ void MX_SPI2_Init(void)
   hspi2.Instance = SPI2;
   hspi2.Init.Mode = SPI_MODE_MASTER;
   hspi2.Init.Direction = SPI_DIRECTION_2LINES;
-  hspi2.Init.DataSize = SPI_DATASIZE_4BIT;
+  hspi2.Init.DataSize = SPI_DATASIZE_8BIT;
   hspi2.Init.CLKPolarity = SPI_POLARITY_LOW;
   hspi2.Init.CLKPhase = SPI_PHASE_1EDGE;
   hspi2.Init.NSS = SPI_NSS_SOFT;
diff --git a/FinalHomework/Core/Src/stm32g4xx_it.c b/FinalHomework/Core/Src/stm32g4xx_it.c
index addd812..267cc11 100644
--- a/FinalHomework/Core/Src/stm32g4xx_it.c
+++ b/FinalHomework/Core/Src/stm32g4xx_it.c
@@ -22,6 +22,7 @@
 #include "stm32g4xx_it.h"
 /* Private includes ----------------------------------------------------------*/
 /* USER CODE BEGIN Includes */
+#include "variable.h"
 /* USER CODE END Includes */
 
 /* Private typedef -----------------------------------------------------------*/
@@ -57,7 +58,9 @@
 /* External variables --------------------------------------------------------*/
 
 /* USER CODE BEGIN EV */
-
+extern stSysTickTimer sSysTickTimer;
+extern uint16_t mSecCount;
+extern uint16_t bSecondIsOk;
 /* USER CODE END EV */
 
 /******************************************************************************/
@@ -187,7 +190,19 @@ void SysTick_Handler(void)
   /* USER CODE END SysTick_IRQn 0 */
   HAL_IncTick();
   /* USER CODE BEGIN SysTick_IRQn 1 */
+  if (++mSecCount >= 100) {
+    mSecCount = 0;
+    bSecondIsOk = 1;
+  }
 
+  if (++sSysTickTimer.mMilSecCount >= 10) {
+    sSysTickTimer.mMilSecCount = 0;
+    sSysTickTimer.bTenMilSecOk = 1;
+    if (++sSysTickTimer.mTimeCount >= 100) {
+      sSysTickTimer.mTimeCount = 0;
+      sSysTickTimer.bTimeOk = 1;
+    }
+  }
   /* USER CODE END SysTick_IRQn 1 */
 }
 
diff --git a/FinalHomework/Core/Src/test.c b/FinalHomework/Core/Src/test.c
new file mode 100644
index 0000000..869ccb9
--- /dev/null
+++ b/FinalHomework/Core/Src/test.c
@@ -0,0 +1,271 @@
+/****************************************************************************************************
+//=========================================电源接线================================================//
+//     LCD模块                STM32单片机
+//      VCC          接        DC5V/3.3V      //电源
+//      GND          接          GND          //电源地
+//=======================================液晶屏数据线接线==========================================//
+//本模块默认数据总线类型为SPI总线
+//     LCD模块                STM32单片机    
+//       SDA         接          PB15         //液晶屏SPI总线数据写信号
+//=======================================液晶屏控制线接线==========================================//
+//     LCD模块 					      STM32单片机 
+//       LED         接          PB9          //液晶屏背光控制信号，如果不需要控制，接5V或3.3V
+//       SCK         接          PB13         //液晶屏SPI总线时钟信号
+//       A0          接          PB10         //液晶屏数据/命令控制信号
+//       RESET       接          PB12         //液晶屏复位控制信号
+//       CS          接          PB11         //液晶屏片选控制信号
+//=========================================触摸屏触接线=========================================//
+//如果模块不带触摸功能或者带有触摸功能，但是不需要触摸功能，则不需要进行触摸屏接线
+//	   LCD模块                STM32单片机 
+//      T_IRQ        接          PC10         //触摸屏触摸中断信号
+//      T_DO         接          PC2          //触摸屏SPI总线读信号
+//      T_DIN        接          PC3          //触摸屏SPI总线写信号
+//      T_CS         接          PC13         //触摸屏片选控制信号
+//      T_CLK        接          PC0          //触摸屏SPI总线时钟信号
+**************************************************************************************************/	
+ /* @attention
+  *
+  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+  * TIME. AS A RESULT, QD electronic SHALL NOT BE HELD LIABLE FOR ANY
+  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+**************************************************************************************************/		
+#include "lcd.h"
+#include "gui.h"
+#include "test.h"
+#include "pic.h"
+#include "main.h"
+
+//========================variable==========================//
+uint16_t ColorTab[5]={RED,GREEN,BLUE,YELLOW,BRED};//定义颜色数组
+//=====================end of variable======================//
+
+/*****************************************************************************
+ * @name       :void DrawTestPage(uint8_t *str)
+ * @date       :2018-08-09 
+ * @function   :Drawing test interface
+ * @parameters :str:the start address of the Chinese and English strings
+ * @retvalue   :None
+******************************************************************************/ 
+void DrawTestPage(uint8_t *str)
+{
+//绘制固定栏up
+LCD_Clear(WHITE);
+LCD_Fill(0,0,lcddev.width,20,BLUE);
+//绘制固定栏down
+LCD_Fill(0,lcddev.height-20,lcddev.width,lcddev.height,BLUE);
+POINT_COLOR=WHITE;
+Gui_StrCenter(0,2,WHITE,BLUE,str,16,1);//居中显示
+Gui_StrCenter(0,lcddev.height-18,WHITE,BLUE,"www.lcdwiki.com",16,1);//居中显示
+//绘制测试区域
+//LCD_Fill(0,20,lcddev.width,lcddev.height-20,WHITE);
+}
+
+/*****************************************************************************
+ * @name       :void main_test(void)
+ * @date       :2018-08-09 
+ * @function   :Drawing the main Interface of the Comprehensive Test Program
+ * @parameters :None
+ * @retvalue   :None
+******************************************************************************/
+void main_test(void)
+{
+	DrawTestPage("综合测试程序");	
+	Gui_StrCenter(0,23,RED,BLUE,"全动电子",16,1);//居中显示
+	Gui_StrCenter(0,40,RED,BLUE,"综合测试程序",16,1);//居中显示	
+	Gui_StrCenter(0,57,GREEN,BLUE,"1.8\" ST7735S",16,1);//居中显示
+	Gui_StrCenter(0,74,GREEN,BLUE,"128X160",16,1);//居中显示
+	Gui_StrCenter(0,91,BLUE,BLUE,"2018-08-22",16,1);//居中显示
+	HAL_Delay(1500);		
+	HAL_Delay(1500);
+}
+
+/*****************************************************************************
+ * @name       :void Test_Color(void)
+ * @date       :2018-08-09 
+ * @function   :Color fill test(white,black,red,green,blue)
+ * @parameters :None
+ * @retvalue   :None
+******************************************************************************/
+void Test_Color(void)
+{
+	//DrawTestPage("测试1:纯色填充测试");
+	LCD_Fill(0,0,lcddev.width,lcddev.height,WHITE);
+	Show_Str(20,30,BLUE,YELLOW,"BL Test",16,1);HAL_Delay(800);
+	LCD_Fill(0,0,lcddev.width,lcddev.height,RED);
+	Show_Str(20,30,BLUE,YELLOW,"RED ",16,1);HAL_Delay(800);
+	LCD_Fill(0,0,lcddev.width,lcddev.height,GREEN);
+	Show_Str(20,30,BLUE,YELLOW,"GREEN ",16,1);HAL_Delay(800);
+	LCD_Fill(0,0,lcddev.width,lcddev.height,BLUE);
+	Show_Str(20,30,RED,YELLOW,"BLUE ",16,1);HAL_Delay(800);
+}
+
+/*****************************************************************************
+ * @name       :void Test_FillRec(void)
+ * @date       :2018-08-09 
+ * @function   :Rectangular display and fill test
+								Display red,green,blue,yellow,pink rectangular boxes in turn,
+								1500 milliseconds later,
+								Fill the rectangle in red,green,blue,yellow and pink in turn
+ * @parameters :None
+ * @retvalue   :None
+******************************************************************************/
+void Test_FillRec(void)
+{
+	uint8_t i=0;
+	DrawTestPage("GUI矩形填充测试");
+	LCD_Fill(0,20,lcddev.width,lcddev.height-20,WHITE);
+	for (i=0; i<5; i++) 
+	{
+		POINT_COLOR=ColorTab[i];
+		LCD_DrawRectangle(lcddev.width/2-40+(i*16),lcddev.height/2-40+(i*13),lcddev.width/2-40+(i*16)+30,lcddev.height/2-40+(i*13)+30); 
+	}
+	HAL_Delay(1500);	
+	LCD_Fill(0,20,lcddev.width,lcddev.height-20,WHITE); 
+	for (i=0; i<5; i++) 
+	{
+		POINT_COLOR=ColorTab[i];
+		LCD_DrawFillRectangle(lcddev.width/2-40+(i*16),lcddev.height/2-40+(i*13),lcddev.width/2-40+(i*16)+30,lcddev.height/2-40+(i*13)+30); 
+	}
+	HAL_Delay(1500);
+}
+
+/*****************************************************************************
+ * @name       :void Test_Circle(void)
+ * @date       :2018-08-09 
+ * @function   :circular display and fill test
+								Display red,green,blue,yellow,pink circular boxes in turn,
+								1500 milliseconds later,
+								Fill the circular in red,green,blue,yellow and pink in turn
+ * @parameters :None
+ * @retvalue   :None
+******************************************************************************/
+void Test_Circle(void)
+{
+	uint8_t i=0;
+	DrawTestPage("GUI画圆填充测试");
+	LCD_Fill(0,20,lcddev.width,lcddev.height-20,WHITE);
+	for (i=0; i<5; i++)  
+		gui_circle(lcddev.width/2-40+(i*15),lcddev.height/2-25+(i*13),ColorTab[i],15,0);
+	HAL_Delay(1500);	
+	LCD_Fill(0,20,lcddev.width,lcddev.height-20,WHITE); 
+	for (i=0; i<5; i++) 
+	  	gui_circle(lcddev.width/2-40+(i*15),lcddev.height/2-25+(i*13),ColorTab[i],15,1);
+	HAL_Delay(1500);
+}
+
+/*****************************************************************************
+ * @name       :void English_Font_test(void)
+ * @date       :2018-08-09 
+ * @function   :English display test
+ * @parameters :None
+ * @retvalue   :None
+******************************************************************************/
+void English_Font_test(void)
+{
+	DrawTestPage("英文显示测试");
+	Show_Str(10,22,BLUE,YELLOW,"6X12:abcdefgh01234567",12,0);
+	Show_Str(10,34,BLUE,YELLOW,"6X12:ABCDEFGH01234567",12,1);
+	Show_Str(10,47,BLUE,YELLOW,"6X12:~!@#$%^&*()_+{}:",12,0);
+	Show_Str(10,60,BLUE,YELLOW,"8X16:abcde01234",16,0);
+	Show_Str(10,76,BLUE,YELLOW,"8X16:ABCDE01234",16,1);
+	Show_Str(10,92,BLUE,YELLOW,"8X16:~!@#$%^&*()",16,0); 
+	HAL_Delay(1200);
+}
+
+/*****************************************************************************
+ * @name       :void Test_Triangle(void)
+ * @date       :2018-08-09 
+ * @function   :triangle display and fill test
+								Display red,green,blue,yellow,pink triangle boxes in turn,
+								1500 milliseconds later,
+								Fill the triangle in red,green,blue,yellow and pink in turn
+ * @parameters :None
+ * @retvalue   :None
+******************************************************************************/
+void Test_Triangle(void)
+{
+	uint8_t i=0;
+	DrawTestPage("GUI Tri填充测试");
+	LCD_Fill(0,20,lcddev.width,lcddev.height-20,WHITE);
+	for(i=0;i<5;i++)
+	{
+		POINT_COLOR=ColorTab[i];
+		Draw_Triangel(lcddev.width/2-40+(i*15),lcddev.height/2-12+(i*11),lcddev.width/2-25-1+(i*15),lcddev.height/2-12-26-1+(i*11),lcddev.width/2-10-1+(i*15),lcddev.height/2-12+(i*11));
+	}
+	HAL_Delay(1500);	
+	LCD_Fill(0,20,lcddev.width,lcddev.height-20,WHITE); 
+	for(i=0;i<5;i++)
+	{
+		POINT_COLOR=ColorTab[i];
+		Fill_Triangel(lcddev.width/2-40+(i*15),lcddev.height/2-12+(i*11),lcddev.width/2-25-1+(i*15),lcddev.height/2-12-26-1+(i*11),lcddev.width/2-10-1+(i*15),lcddev.height/2-12+(i*11));
+	}
+	HAL_Delay(1500);
+}
+
+/*****************************************************************************
+ * @name       :void Chinese_Font_test(void)
+ * @date       :2018-08-09 
+ * @function   :chinese display test
+ * @parameters :None
+ * @retvalue   :None
+******************************************************************************/
+void Chinese_Font_test(void)
+{	
+	DrawTestPage("中文显示测试");
+	Show_Str(10,25,BLUE,YELLOW,"16X16:全动电子欢迎",16,0);
+	Show_Str(10,45,BLUE,YELLOW,"24X24:中文测试",24,1);
+	Show_Str(10,70,BLUE,YELLOW,"32X32:字体测试",32,1);
+	HAL_Delay(1200);
+}
+
+/*****************************************************************************
+ * @name       :void Pic_test(void)
+ * @date       :2018-08-09 
+ * @function   :picture display test
+ * @parameters :None
+ * @retvalue   :None
+******************************************************************************/
+void Pic_test(void)
+{
+	DrawTestPage("图片显示测试");
+	//LCD_Fill(0,20,lcddev.width,lcddev.height-20,WHITE);
+	Gui_Drawbmp16(20,30,gImage_qq);
+	Show_Str(20+12,75,BLUE,YELLOW,"QQ",16,1);
+	Gui_Drawbmp16(70,30,gImage_qq);
+	Show_Str(70+12,75,BLUE,YELLOW,"QQ",16,1);
+//	Gui_Drawbmp16(150,30,gImage_qq);
+//	Show_Str(150+12,75,BLUE,YELLOW,"QQ",16,1);
+	HAL_Delay(1200);
+}
+
+/*****************************************************************************
+ * @name       :void Rotate_Test(void)
+ * @date       :2018-08-09 
+ * @function   :rotate test
+ * @parameters :None
+ * @retvalue   :None
+******************************************************************************/
+void Rotate_Test(void)
+{
+	uint8_t i=0;
+	uint8_t *Direction[4]={"Rotation:0","Rotation:90","Rotation:180","Rotation:270"};
+	
+	for(i=0;i<4;i++)
+	{
+	LCD_direction(i);
+	DrawTestPage("屏幕旋转测试");
+	Show_Str(20,30,BLUE,YELLOW,Direction[i],16,1);
+	Gui_Drawbmp16(30,50,gImage_qq);
+	HAL_Delay(1000);HAL_Delay(1000);
+	}
+	LCD_direction(USE_HORIZONTAL);
+}
+
+
+
+
+
+
diff --git a/FinalHomework/FinalHomework.ioc b/FinalHomework/FinalHomework.ioc
index 9ee8b10..d80f043 100644
--- a/FinalHomework/FinalHomework.ioc
+++ b/FinalHomework/FinalHomework.ioc
@@ -162,8 +162,9 @@ RCC.VCOInputFreq_Value=4000000
 RCC.VCOOutputFreq_Value=340000000
 SPI2.BaudRatePrescaler=SPI_BAUDRATEPRESCALER_8
 SPI2.CalculateBaudRate=21.25 MBits/s
+SPI2.DataSize=SPI_DATASIZE_8BIT
 SPI2.Direction=SPI_DIRECTION_2LINES
-SPI2.IPParameters=VirtualType,Mode,Direction,BaudRatePrescaler,CalculateBaudRate
+SPI2.IPParameters=VirtualType,Mode,Direction,BaudRatePrescaler,CalculateBaudRate,DataSize
 SPI2.Mode=SPI_MODE_MASTER
 SPI2.VirtualType=VM_MASTER
 VP_SYS_VS_DBSignals.Mode=DisableDeadBatterySignals
diff --git a/FinalHomework/MDK-ARM/FinalHomework.uvprojx b/FinalHomework/MDK-ARM/FinalHomework.uvprojx
index ff45e1a..88e1a08 100644
--- a/FinalHomework/MDK-ARM/FinalHomework.uvprojx
+++ b/FinalHomework/MDK-ARM/FinalHomework.uvprojx
@@ -1,39 +1,46 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" noNamespaceSchemaLocation="project_projx.xsd">
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_projx.xsd">
+
   <SchemaVersion>2.1</SchemaVersion>
+
   <Header>### uVision Project, (C) Keil Software</Header>
+
   <Targets>
     <Target>
       <TargetName>FinalHomework</TargetName>
       <ToolsetNumber>0x4</ToolsetNumber>
       <ToolsetName>ARM-ADS</ToolsetName>
+      <pCCUsed>6160000::V6.16::ARMCLANG</pCCUsed>
+      <uAC6>1</uAC6>
       <TargetOption>
         <TargetCommonOption>
           <Device>STM32G473RCTx</Device>
           <Vendor>STMicroelectronics</Vendor>
-          <Cpu>IRAM(0x20000000-0x2001FFFF) IROM(0x8000000-0x803FFFF) CLOCK(8000000) FPU2 CPUTYPE("Cortex-M4") TZ</Cpu>
-          <FlashUtilSpec />
-          <StartupFile />
-          <FlashDriverDll />
+          <PackID>Keil.STM32G4xx_DFP.1.5.0</PackID>
+          <PackURL>https://www.keil.com/pack/</PackURL>
+          <Cpu>IRAM(0x20000000-0x2001FFFF) IROM(0x8000000-0x803FFFF)  CLOCK(8000000) FPU2 CPUTYPE("Cortex-M4") TZ</Cpu>
+          <FlashUtilSpec></FlashUtilSpec>
+          <StartupFile></StartupFile>
+          <FlashDriverDll></FlashDriverDll>
           <DeviceId>0</DeviceId>
-          <RegisterFile />
-          <MemoryEnv />
-          <Cmp />
-          <Asm />
-          <Linker />
-          <OHString />
-          <InfinionOptionDll />
-          <SLE66CMisc />
-          <SLE66AMisc />
-          <SLE66LinkerMisc />
-          <SFDFile />
+          <RegisterFile></RegisterFile>
+          <MemoryEnv></MemoryEnv>
+          <Cmp></Cmp>
+          <Asm></Asm>
+          <Linker></Linker>
+          <OHString></OHString>
+          <InfinionOptionDll></InfinionOptionDll>
+          <SLE66CMisc></SLE66CMisc>
+          <SLE66AMisc></SLE66AMisc>
+          <SLE66LinkerMisc></SLE66LinkerMisc>
+          <SFDFile>$$Device:STM32G473RCTx$CMSIS\SVD\STM32G473xx.svd</SFDFile>
           <bCustSvd>0</bCustSvd>
           <UseEnv>0</UseEnv>
-          <BinPath />
-          <IncludePath />
-          <LibPath />
-          <RegisterFilePath />
-          <DBRegisterFilePath />
+          <BinPath></BinPath>
+          <IncludePath></IncludePath>
+          <LibPath></LibPath>
+          <RegisterFilePath></RegisterFilePath>
+          <DBRegisterFilePath></DBRegisterFilePath>
           <TargetStatus>
             <Error>0</Error>
             <ExitCodeStop>0</ExitCodeStop>
@@ -48,15 +55,15 @@
           <CreateHexFile>1</CreateHexFile>
           <DebugInformation>1</DebugInformation>
           <BrowseInformation>1</BrowseInformation>
-          <ListingPath>./FinalHomework/</ListingPath>
+          <ListingPath></ListingPath>
           <HexFormatSelection>1</HexFormatSelection>
           <Merge32K>0</Merge32K>
           <CreateBatchFile>0</CreateBatchFile>
           <BeforeCompile>
             <RunUserProg1>0</RunUserProg1>
             <RunUserProg2>0</RunUserProg2>
-            <UserProg1Name />
-            <UserProg2Name />
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
             <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
             <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
             <nStopU1X>0</nStopU1X>
@@ -65,8 +72,8 @@
           <BeforeMake>
             <RunUserProg1>0</RunUserProg1>
             <RunUserProg2>0</RunUserProg2>
-            <UserProg1Name />
-            <UserProg2Name />
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
             <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
             <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
             <nStopB1X>0</nStopB1X>
@@ -75,15 +82,15 @@
           <AfterMake>
             <RunUserProg1>0</RunUserProg1>
             <RunUserProg2>1</RunUserProg2>
-            <UserProg1Name />
-            <UserProg2Name />
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
             <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
             <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
             <nStopA1X>0</nStopA1X>
             <nStopA2X>0</nStopA2X>
           </AfterMake>
           <SelectedForBatchBuild>1</SelectedForBatchBuild>
-          <SVCSIdString />
+          <SVCSIdString></SVCSIdString>
         </TargetCommonOption>
         <CommonProperty>
           <UseCPPCompiler>0</UseCPPCompiler>
@@ -97,8 +104,8 @@
           <AssembleAssemblyFile>0</AssembleAssemblyFile>
           <PublicsOnly>0</PublicsOnly>
           <StopOnExitCode>3</StopOnExitCode>
-          <CustomArgument />
-          <IncludeLibraryModules />
+          <CustomArgument></CustomArgument>
+          <IncludeLibraryModules></IncludeLibraryModules>
           <ComprImg>0</ComprImg>
         </CommonProperty>
         <DllOption>
@@ -131,11 +138,11 @@
           </Flash1>
           <bUseTDR>1</bUseTDR>
           <Flash2>BIN\UL2V8M.DLL</Flash2>
-          <Flash3 />
-          <Flash4 />
-          <pFcarmOut />
-          <pFcarmGrp />
-          <pFcArmRoot />
+          <Flash3></Flash3>
+          <Flash4></Flash4>
+          <pFcarmOut></pFcarmOut>
+          <pFcarmGrp></pFcarmGrp>
+          <pFcArmRoot></pFcArmRoot>
           <FcArmLst>0</FcArmLst>
         </Utilities>
         <TargetArmAds>
@@ -168,7 +175,7 @@
             <RvctClst>0</RvctClst>
             <GenPPlst>0</GenPPlst>
             <AdsCpuType>"Cortex-M4"</AdsCpuType>
-            <RvctDeviceName />
+            <RvctDeviceName></RvctDeviceName>
             <mOS>0</mOS>
             <uocRom>0</uocRom>
             <uocRam>0</uocRam>
@@ -180,7 +187,7 @@
             <RvdsMve>0</RvdsMve>
             <RvdsCdeCp>0</RvdsCdeCp>
             <hadIRAM2>0</hadIRAM2>
-            <hadIROM2>1</hadIROM2>
+            <hadIROM2>0</hadIROM2>
             <StupSel>8</StupSel>
             <useUlib>0</useUlib>
             <EndSel>0</EndSel>
@@ -199,7 +206,7 @@
             <Ro2Chk>0</Ro2Chk>
             <Ro3Chk>0</Ro3Chk>
             <Ir1Chk>1</Ir1Chk>
-            <Ir2Chk>1</Ir2Chk>
+            <Ir2Chk>0</Ir2Chk>
             <Ra1Chk>0</Ra1Chk>
             <Ra2Chk>0</Ra2Chk>
             <Ra3Chk>0</Ra3Chk>
@@ -238,13 +245,13 @@
               </Ocm6>
               <IRAM>
                 <Type>0</Type>
-                <StartAddress>0x0</StartAddress>
-                <Size>0x0</Size>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x20000</Size>
               </IRAM>
               <IROM>
                 <Type>1</Type>
-                <StartAddress>0x0</StartAddress>
-                <Size>0x0</Size>
+                <StartAddress>0x8000000</StartAddress>
+                <Size>0x40000</Size>
               </IROM>
               <XRAM>
                 <Type>0</Type>
@@ -268,8 +275,8 @@
               </OCR_RVCT3>
               <OCR_RVCT4>
                 <Type>1</Type>
-                <StartAddress />
-                <Size />
+                <StartAddress>0x8000000</StartAddress>
+                <Size>0x40000</Size>
               </OCR_RVCT4>
               <OCR_RVCT5>
                 <Type>1</Type>
@@ -293,8 +300,8 @@
               </OCR_RVCT8>
               <OCR_RVCT9>
                 <Type>0</Type>
-                <StartAddress>0x0</StartAddress>
-                <Size>0x0</Size>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x20000</Size>
               </OCR_RVCT9>
               <OCR_RVCT10>
                 <Type>0</Type>
@@ -302,11 +309,11 @@
                 <Size>0x0</Size>
               </OCR_RVCT10>
             </OnChipMemories>
-            <RvctStartVector />
+            <RvctStartVector></RvctStartVector>
           </ArmAdsMisc>
           <Cads>
             <interw>1</interw>
-            <Optim>4</Optim>
+            <Optim>2</Optim>
             <oTime>0</oTime>
             <SplitLS>0</SplitLS>
             <OneElfS>1</OneElfS>
@@ -315,13 +322,13 @@
             <PlainCh>0</PlainCh>
             <Ropi>0</Ropi>
             <Rwpi>0</Rwpi>
-            <wLevel>2</wLevel>
+            <wLevel>3</wLevel>
             <uThumb>0</uThumb>
             <uSurpInc>0</uSurpInc>
             <uC99>1</uC99>
             <uGnu>0</uGnu>
             <useXO>0</useXO>
-            <v6Lang>5</v6Lang>
+            <v6Lang>3</v6Lang>
             <v6LangP>3</v6LangP>
             <vShortEn>1</vShortEn>
             <vShortWch>1</vShortWch>
@@ -329,9 +336,9 @@
             <v6WtE>0</v6WtE>
             <v6Rtti>0</v6Rtti>
             <VariousControls>
-              <MiscControls />
+              <MiscControls></MiscControls>
               <Define>USE_HAL_DRIVER,STM32G473xx</Define>
-              <Undefine />
+              <Undefine></Undefine>
               <IncludePath>../Core/Inc;../Drivers/STM32G4xx_HAL_Driver/Inc;../Drivers/STM32G4xx_HAL_Driver/Inc/Legacy;../Drivers/CMSIS/Device/ST/STM32G4xx/Include;../Drivers/CMSIS/Include</IncludePath>
             </VariousControls>
           </Cads>
@@ -347,10 +354,10 @@
             <useXO>0</useXO>
             <ClangAsOpt>1</ClangAsOpt>
             <VariousControls>
-              <MiscControls />
-              <Define />
-              <Undefine />
-              <IncludePath />
+              <MiscControls></MiscControls>
+              <Define></Define>
+              <Undefine></Undefine>
+              <IncludePath></IncludePath>
             </VariousControls>
           </Aads>
           <LDads>
@@ -360,15 +367,15 @@
             <noStLib>0</noStLib>
             <RepFail>1</RepFail>
             <useFile>0</useFile>
-            <TextAddressRange />
-            <DataAddressRange />
-            <pXoBase />
-            <ScatterFile />
-            <IncludeLibs />
-            <IncludeLibsPath />
-            <Misc />
-            <LinkerInputFile />
-            <DisabledWarnings />
+            <TextAddressRange></TextAddressRange>
+            <DataAddressRange></DataAddressRange>
+            <pXoBase></pXoBase>
+            <ScatterFile></ScatterFile>
+            <IncludeLibs></IncludeLibs>
+            <IncludeLibsPath></IncludeLibsPath>
+            <Misc></Misc>
+            <LinkerInputFile></LinkerInputFile>
+            <DisabledWarnings></DisabledWarnings>
           </LDads>
         </TargetArmAds>
       </TargetOption>
@@ -386,6 +393,51 @@
         <Group>
           <GroupName>Application/User/Core</GroupName>
           <Files>
+            <File>
+              <FileName>gui.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\Core\Src\gui.c</FilePath>
+            </File>
+            <File>
+              <FileName>lcd.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\Core\Src\lcd.c</FilePath>
+            </File>
+            <File>
+              <FileName>test.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\Core\Src\test.c</FilePath>
+            </File>
+            <File>
+              <FileName>lcd.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\Core\Inc\lcd.h</FilePath>
+            </File>
+            <File>
+              <FileName>test.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\Core\Inc\test.h</FilePath>
+            </File>
+            <File>
+              <FileName>FONT.H</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\Core\Inc\FONT.H</FilePath>
+            </File>
+            <File>
+              <FileName>GUI.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\Core\Inc\GUI.h</FilePath>
+            </File>
+            <File>
+              <FileName>pic.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\Core\Inc\pic.h</FilePath>
+            </File>
+            <File>
+              <FileName>variable.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\Core\Inc\variable.h</FilePath>
+            </File>
             <File>
               <FileName>main.c</FileName>
               <FileType>1</FileType>
@@ -513,20 +565,24 @@
             </File>
           </Files>
         </Group>
+        <Group>
+          <GroupName>::CMSIS</GroupName>
+        </Group>
       </Groups>
     </Target>
   </Targets>
+
   <RTE>
-    <apis />
+    <apis/>
     <components>
-      <component Cclass="CMSIS" Cgroup="CORE" Cvendor="ARM" Cversion="4.3.0" condition="CMSIS Core">
-        <package name="CMSIS" schemaVersion="1.3" url="http://www.keil.com/pack/" vendor="ARM" version="4.5.0" />
+      <component Cclass="CMSIS" Cgroup="CORE" Cvendor="ARM" Cversion="5.6.0" condition="ARMv6_7_8-M Device">
+        <package name="CMSIS" schemaVersion="1.7.7" url="http://www.keil.com/pack/" vendor="ARM" version="5.9.0"/>
         <targetInfos>
-          <targetInfo name="FinalHomework" />
+          <targetInfo name="FinalHomework"/>
         </targetInfos>
       </component>
     </components>
-    <files />
+    <files/>
   </RTE>
-</Project>
 
+</Project>